ADUROSMART 81822 ERIA Wireless Contact Sensor User Manual

June 6, 2024
ADUROSMART

ADUROSMART 81822 ERIA Wireless Contact Sensor

ADUROSMART 81822 ERIA Wireless Contact Sensor image

Who Can Use

  1. Place the batteries in the battery compartment.ADUROSMART 81822 ERIA Wireless Contact Sensor fig1 Connect with the ERIA hub
  2. Download the Adurosmart App from the Apple App Store or from Google Play or go to http://adurosmart.com/adurosmart-app/ADUROSMART 81822 ERIA Wireless Contact Sensor fig2If you have a third-party ZlgBee compatible hub then proceed to step 9.
  3. Open the Adurosmart Eria APP.ADUROSMART 81822 ERIA Wireless Contact Sensor fig3
  4. On the bottom right corner press on “Settings”. ADUROSMART 81822 ERIA Wireless Contact Sensor fig4
  5. Select “Devices”.ADUROSMART 81822 ERIA Wireless Contact Sensor fig5
  6. On the top right corner press on the”+” symbol then press on “Add device”. ADUROSMART 81822 ERIA Wireless Contact Sensor fig6
  7. Press on “Brands” and then select “AduroSmart ERIA”.ADUROSMART 81822 ERIA Wireless Contact Sensor fig7
  8. Press on “Door / Window Sensor”ADUROSMART 81822 ERIA Wireless Contact Sensor fig8
  9. Locate the small pinhole button on the side of the sensor use a small pin or paperclip to press the button for 2 seconds, the LED indicator will flash continuously for 60 seconds indicating that the sensor is in pairing mode. If you have a third-party hub, then this is the moment to Initiate the search from your Smart Home hub app.
  10. Proceed by pressing on “Search” to allow the Adurosmart ERIA hub to find the sensor, the LED indicate on the hub will flash green this indicates that the hub is searching for new devices.
  11. When the sensor has been found and paired successfully the sensor will stop flashing and it will show up in your search results, press on “Done” to complete the processADUROSMART 81822 ERIA Wireless Contact Sensor fig11
  12. Troubleshoot.
    If you are experiencing issues while connecting the Sensor then please follow below instructions to reset the sensor.
    Locate the small pinhole button on the sensor, use a small pin or paperclip to press the button for l O seconds the sensor LED indicator will flash quickly to confirm the reset.

LED FUNCTION TABLE

Connection mode LED will flash once per second for approximately l min.
Connection successfully LED will stop flash.
Sensor reset LED will flash quickly.

Sensor triggered

{when the sensor is opened for more than l 0mm)

| LED will flash once.

NEED HELP? CALL US

For troubleshoots, Instruction video’s or more information please visit us at www.adurosmart.com/faq
Chat with one of our support agents at
www.adurosmart.com

The Netherlands: +31 523687532
Supporl@Adurosmart.eu

www.adurosmart.com/manuals/contactsensor

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

Related Manuals