ADUROSMART ERIA 81847 Scene Remote User Manual

: June 1, 2024
: ADUROSMART ERIA

Table of Contents

ADUROSMART ERIA 81847 Scene Remote
Assembly Instructions
Documents / Resources
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)

ADUROSMART ERIA 81847 Scene Remote

The Eria wireless scene switch is a battery-powered dimmer for Zig Bee Light link and 3.0 certified lights: it controls your preferred lighting setting. ADUROSMART ERIA 81847 Scene Remote 2

Assembly Instructions

Pull off the lid sticking out of the battery compartment.
To use without a control station, switch on the Zig Bee lamp which you want to control.
Touch the lamp cover with the remote and keep pressing button l {symbol}+ button 2 (symbol) . The Eria soft white lamp will flash 2 times when it initiates the touch link and a color lamp will flash green once. Make sure that you keep button 1 {symbol)+ button 2 {symbol) pressed until a successful touch-link is confirmed as illustrated at step 4.
If the touchlink is successful the soft white lamp will flash slowly 2 times, if you have touchlinked the color lamp successful then it will turn green.

Connect with the ERIA hub

Download the Adurosmart App from the Apple App Store or from Google Play or go to http://adurosmart.com/adurosmart-app/
lf you have a third party ZigBee compatible hub then proceed to step 9.
Open the Adurosmart Eria APP.
On the bottom right corner press on “Settings”.
Select “Devices”.
On the top right corner press on the”+” symbol then press on “Add device”.
Press on “Brands” and then select “AduroSmart ERIA”.
Press on “‘Scene Controller”
Proceed by pressing on “Search” to allow the ERIA hub to find the remote, the LED indicator on the hub will flash green this indicates that the hub is searching for new devices.
If you have a third party hub, then this is the moment to Initiate the search from your Smart Home hub app.
While the hub is searching press and hold button 2 (symbol) and 3 (symbol) on the remote for 1 O seconds if the remote is paired successfully it will be confirmed by a green flash, when the remote has failed to pair the LED indicator will flash red.
When the remote has been found and paired successfully it will show up in your search results, press on “Done” to complete the process
Troubleshoot
If you have followed the pairing instructions but you are still not able to connect your device then follow below instructions to reset the controller.

To reset the remote:
press and hold the 1 button ( symbol ) +3 button { symbol on the remote simultaneously for 10 seconds

successful reset will be confirmed b
green flash from the LED indicator, failed reset will be indicated by a red flash.

NEED HELP? CALL US
For troubleshoots, Instruction video’s or more information, please visit us at www.adurosmart.com/faq
Chat with one of our support agents at www.adurosmart.com
The Netherlands: +31 523687532
Support@Adurosmart.eu