ADUROSMART 81855 ERIA Smartplug User Manual

June 6, 2024
ADUROSMART

ADUROSMART ERIA logo c1

USER MANUAL SMART PLUG

ADUROSMART 81855 ERIA Smartplug

LED FUNCTION TABLE
Connection mode The LED indicator will flash once per second for 60 seconds.
Connection successfully Once the connection has established the LED indicator

will stop flashing.
Plug Reset| The LED will show a burst of fast flashes.

Connect with the ERR hub

1 A. Download the Adurosmart App from the Apple App Store or from Google Play or go to http://adurosmart.com/adurosmart-app/

Android                                   IOS

1B. If you have a third party ZigBee compatible hub then proceed to step 8.

2. Open the Adurosmart Eria APP.

2 Open the Adurosmart Eria APP

3. On the bottom right corner press on “Settings”.

3 On the bottom right corner press on Settings

4. Select “Devices”.

Select Devices

5. On the top right corner press on the “+” symbol then press on “Add device”.

5 Add device

6. Press on “Brands” and then select “AduroSmart ERIA”.

6 AduroSmart ERIA

7. Press on “Dimming Plug”

7 Dimming Plug

8. Press the button on the plug for 2 seconds the LED indicator will flash continuously for 60 seconds indicating that it is in pairing mode.

8 LED indicator

8B. If you have a third party hub , then this is the moment to initiate the search from your Smart Home hub app.

9. Proceed by pressing on “Search” to allow the Adurosmart ERIA hub to find the plug, the LED indicator on the hub will flash green this indicates that the hub is searching for new devices.

9 Dimming plug

10. When the plug has been found and paired successfully the plug will stop flashing and it will show up in your search results, press on “Done” to complete the process.

10 Search result

11 Use with a wireless ZigBee switch. (no hub required)
Touchlink your smart plug with a ZigBee enabled touchlink remote: Move your touchlink remote within 10cm from the AduroSmart ERIA smart plug and initiate the touchlink procedure according to your touchlink enabled remote instructions.

11 Use with a wireless ZigBee switch

12. TroubleShoot
When the smart plug does not enter pairing mode, than reset the plug to factory default by pressing the button on top of the smart plug for 10 seconds once the smart plug is set back to factory default it will blink shortly. The LED will blink fast 10 times to confirm the reset.

12 TroubleShoot

press 10 seconds

13. Improve Dimming
If the dimming effect is not satisfactory press the button for 25 seconds to switch from trailing edge to leading edge. When the switch has been made, the LED indicator will flash once to indicate the dimmer is set to leading edge or twice for trailing edge.

12 TroubleShoot

press 25 seconds

NEED HELP? CALL US

For troubleshoots, instruction video’s or more information please visit us at www.adurosmart.com/faq

Chat with one of our support agents at www.adurosmart.com

The Netherlands: +31 523687532
Support@Adurosmart.eu

ADUROSMART 81855 ERIA Smartplug QR code

www.adurosmart.com/manuals/dimmingplug

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

Related Manuals