GAMDIAS AEOLUS P2-1203U ARGB PWM 120mm Fan Pack Instruction Manual
- June 1, 2024
- GAMDIAS
Table of Contents
GAMDIAS AEOLUS P2-1203U ARGB PWM 120mm Fan Pack
Specifications
| Product: | AEOLUS P2 1203U |
|---|---|
| Type: | Case & Radiator Fan |
| Brand: | GAMDIAS |
Package Contents
- A: Fan x3
- B: Fan Blades x3
- C: Controller x1
- D: Screws x12
- E: Long Screws x12
- F: Power Cable x1
- G: Connecting Cable x1
- H: Signal Cable x1
- I: Controller Cable x1
- J: Controller Extension Cable x1
- K: LED Cable x4
- L: Mounting Cable x1
Installation Instructions
- Ensure to turn off the power before starting the installation.
- Identify the front and back of the fan for correct orientation.
- Install the fan onto the case or radiator using the screws provided.
- Connect the fan to the controller using the cables included in the package.
Turn off Power
Front and Back Orientation
- When looking at the front of the fan, the frame is deeper and the blades are visible. The back has a shallower frame and the support structure for the blades is prominent.
Attaching Fans to Radiator
- Position the fan so that the air flows through the radiator.
- Secure the fan to the radiator using long screws.
- Ensure the fan is properly mounted and secured.
Replacing Fan Blades
- Remove the old fan blades by pulling them out.
- Place the new fan blades onto the motor hub.
- Press down to secure the new fan blades.
Connecting the Fans
- Connect multiple fans by aligning the notches and sliding them into place. Ensure they are firmly connected.
Wiring Instructions
- Connect the fans to the power supply unit (PSU) and the controller. Arrange the cables neatly to allow for optimal airflow and organization within the case.
FAQ
- Q: How many fans can I connect to one controller?
- A: You can connect up to 5 fans per port, with a total of 15 fans when using all ports.
- Q: Can I replace the fan blades?
- A: Yes, the fan blades are designed to be replaceable. Follow the instructions for removing and attaching blades.
- Q: What should I do if my fan is not working after installation?
- A: Check all connections to ensure they are secure and properly oriented. Verify that the power is turned on. If the issue persists, consult the product’s support.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>