GAMDIAS TALOS E3 Mid Tower Case Installation Guide
- June 5, 2024
- GAMDIAS
Table of Contents
TALOS E3 Mid Tower Case
Installation Guide
SPECIFICATIONS
| SERIES | TG Series |
|---|---|
| Product Name | TALOS E3 / TALOS E3 WH |
| Case Type | MID Tower |
| Dimension (L x W x H) | 363 x 210 x 447 mm |
14.3 x 8.3 x 17.6 inch
Chassis Dimension (L x W x H)| 330 x 210 x 430 mm
13 x 8.3 x 16.9 inch
Motherboard Support| ATX, Micro-ATX,Mini-ITX
Expansion Slots| 7
Material| SPCC , ABS , Tempered glass
Window| Front , Left
Radiator Support| Top: 240mm
Front: 360 mm (The removement of HDD
cage is suggested) , 280 mm
Rear: 120mm
Fan Support| Top: 2 x 120mm
Front: 3 x 120mm , 2 x 140mm
Rear: 1 x 120mm
Bottom: 2 x 120mm
Pre-installed Fans| Front: 2 x 120mm ARGB Fans
Rear: 1 x 120mm ARGB Fan
Pre-installed Control BOX| NO
Motherboard Sync| 5V 3-Pin Addressable Header
Drive Bays| 2 x 3.5″ or 1 x 2.5″+1 x 3.5″(HDD Cage)
2 x 2.5″
Clearance| CPU cooler height limitation: 160mm
VGA length limitation: 300mm
PSU length limitation: 150mm
I/O Port| USB 3.0 x1, USB 2.0 x2,
HD Audio x1, Fan LED Control x1
EXPLODED VIEW PARTS
PARTS
| 0 | Chassis Body | 5 | IO Port |
|---|---|---|---|
| 1 | Tempered Glass Side Pane & Screw | 6 | 120MM ARGB FAN |
| 2 | Right Side Panel | 7 | HDD Cage |
| 3 | Top Dust Filters | 8 | Rubber Foot |
| 4 | Tempered Glass Front Panel | 9 | 120MM ARGB Fan |
ACCESSORY
| Figure | Parts Name | Qty | Used for |
|---|---|---|---|
| Stand-off 4.75 x 9.5 x 6.5mm | 3 | Motherboard | |
| Screw #6 x 6 mm | 6 | PSU | |
| Screw #6 x 5 mm | 9 | HDD | |
| Screw M3 x 5 mm | 18 | 2.5″ HDD/Motherboard/ODD | |
| CableTie | 5 | Cable Management |
SIDE PANEL REMOVAL
Remove the side panel
MOTHERBOARD INSTALLATION
Lay down the chassis Install the motherboard in proper location and secure it with screws
PSU INSTALLATION
Place the PSU in proper location
3.5″ 2.5″ HDD INSTALLATION
A. 3.5″ HDD
Align the HDD into the mounting holes and screw in.
B. 2.5″ SSD
Align the SSD into the mounting holes and screw in.
AIR COOLING COMPATIBILITY
| Top | 2 x 120mm |
|---|---|
| Front | 3 x 120mm or 2 x 140mm |
| Rear | 1 x 120mm |
| Bottom | 2 x 120mm |
RADIATOR COMPATIBILITY
I/O PORTS
| 1 | Power Button | 5 | Mic |
|---|---|---|---|
| 2 | Fan LED Control | 6 | USB 2.0 |
| 3 | USB 2.0 | 7 | USB 3.0 |
| 4 | Headphone |
1. Sync With Motherboard : Press and Hold the Fan LED Control Button for 3 Seconds.
I/O CONNECTORS
See your motherboard’s manual for front panel header locations and pin-outs.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>