GAMDIAS ATHENA M6 Mid Tower Case Installation Guide
- June 3, 2024
- GAMDIAS
Table of Contents
ATHENA M6 Mid Tower Case
Installation Guide
SPECIFICATIONS
SERIES | Mesh Series |
---|---|
Product Name | ATHENA M6/ ATHENA M6 WH |
Case Type | MID Tower |
Dimension (L x W x H) | 410 x 230 x 477 mm |
15.4 x 9 x 18.1 inch
Chassis Dimension (L x W x H)| 350 x 230 x 445 mm
13.7 x 9 x 17.5 inch
Motherboard Support| ATX, Micro-ATX,Mini-ITX
Expansion Slots| 7
Material| SPCC, ABS, Tempered glass
Window| Left
Radiator Support| Top: 240mm
Front: 360 mm, 280 mm
Rear: 140mm, 120mm
Fan Support| Top: 2 x 120mm, 2 x 140mm
Front: 3 x 120mm, 2 x 140mm
Rear: 1 x 120mm, 1 x 140mm
Pre-installed Fans| Front: 3 x 120mm ARGB Fans
Rear: 1 x 120mm ARGB Fan
Pre-installed Control BOX| Yes
Motherboard Sync| 5V 3-Pin Addressable Header
Drive Bays| 2 x 3.5″ or 1 x 2.5″+1 x 3.5″(HDD Cage) 2 x 2.5″
Clearance| CPU cooler height limitation: 190mm
VGA length limitation: 340mm
PSU length limitation: 180mm
I/O Port| USB 3.0 x1, USB 2.0 x2,
HD Audio x1, Fan LED Control x1
EXPLODED VIEW PARTS
1 | Chassis Body |
---|---|
2 | Tempered Glass Side Pane & Screw |
3 | Right Side Panel |
4 | Top Dust Filters |
5 | Mesh Front Panel |
6 | IO Port |
7 | 120MM ARGB PWM FAN |
8 | Light Strips |
9 | Rubber Foot |
ACCESSORY
Figure | Parts Name | Qty | Used for |
---|---|---|---|
Stand-off 4.75 x 9.5 x 6.5mm | 3 | Motherboard | |
Screw #6 x 6 mm | 4 | PSU | |
Screw #6 x 5 mm | 8 | HDD | |
Screw M3 x 5 mm | 25 | 2.5″ HDD/Motherboard/ODD | |
CableTie | 5 | Cable Management |
SIDE PANEL REMOVAL
Remove the side panel
MOTHERBOARD INSTALLATION
Lay down the chassis
Install the motherboard in proper location and secure it with screws
PSU INSTALLATION
Place the PSU in proper location
3.5″ 2.5″ HDD INSTALLATION
A. 3.5″ HDD
Align the HDD into the mounting holes and screw in.
B. 2.5″ SSD
Align the SSD into the mounting holes and screw in.
AIR COOLING COMPATIBILITY
Top 2 x 120mm
Front 3 x 120mm or 2 x 140mm
Rear 1 x 120mm or 1 x 140mm
RADIATOR COMPATIBILITY
Top 240 mm
Front 360 mm or 280 mm
Rear 120 mm
I/O PORTS
1 | Power Button | 5 | Mic |
---|---|---|---|
2 | Fan LED Control | 6 | USB 2.0 |
3 | USB 2.0 | 7 | USB 3.0 |
4 | Headphone |
- Sync With Motherboard : Press and Hold the Fan LED Control Button for 3 Seconds.
I/O CONNECTORS
See your motherboard’s manual for front panel header locations and pin-outs.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>