vicseed CTEZB08 Car Mount User Guide
- June 6, 2024
- vicseed
Table of Contents
HOLDER
Car Mount
MAKE YOUR LIFE SIMPLE
Overview
| 
---|---
| 
Attentions
- Please install the car mount in a suitable place before starting the journey, do not operate and adjust the car mount while driving.
- Do not install the car mount in a position that interferes with the operation of the airbag or hinders driving.
- Keep the car mount away from children.
Tips for Suction Cup
- If the surface is flat and smooth, you can use the suction cup on the dashboard directly; While the surface is flat but not smooth, please use the suction cup on the dashboard pad.
- Do not stick the suction cup to curved surfaces, plush fabric, or uneven surfaces. Otherwise, it would not be attached securely.
- It is not recommended to attach the suction cup to the surface of leather, wall, or glass film, because the suction cup with strong viscosity and attractiveness, which may cause surface damage.
- If the suction cup is frequently used in high temperature, low temperature, or humid conditions, the suction force will decrease; Please avoid direct exposure to the sun for a long time.
- After using it for a while, if the suction is not sticky enough, please take down the suction cup and wash it with warm soap water. It will be sticky again after drying.
- Please protect the suction cup with plastic wrap when not in use.
Installation Steps
Method 1 – Use with the Suction Cup
1. Unscrew the fixed nut completely, let the ball joint pass through the
fixed nut (The thread must face to the groove). Push the ball joint firmly
into the groove on the back of the car mount.
|
2. Tighten the fixed nut.
---|---
3. Choose a flat surface on the dashboard, and clean the surface where
you need to install the car mount with a wet cloth. Wait it to dry, and
then install the dashboard pad. (Tear off the red protective sticker of
dashboard pad, stick the pad to the position where you want to install
the car mount. Press it firmly for 1 minute to fix it. Let it sit for 24 hours
before installing the car mount.)
The dashboard pad is disposable. Once pasted, it’s hard to remove.
Once applied, it cannot be used again. Please choose the appropriate
position to install the dashboard pad.| 
4. Attach the suction cup to the windshield/dashboard hard and press
the suction cup lock to bottom position(not the middle position) to
secure the car mount.
|
5. Adjust the angle of the car mount to fit your view. (Twist the extendable
arm adjusting nut to adjust the length of the arms. Twist the extendable arm
retaining nut to change the angle of the arms.)
Method 2 — Use with Air Vent Clip
• Suitability for Car Air Vents
Compatible with horizontal and vertical air vents, not for round vents.
1. Unscrew the fixed nut on the back of the car mount, pass the ball joint
through the fixed nut. Push the ball joint into the groove hard until it falls
into the socket.
| 2. Tighten the fixed nut.
---|---
3. Twist the locking handle to adjust the opening size of the air vent clip.
| 4. Insert the vent clip into car air
vent blades totally, so they will attach
together securely. Then twist the locking handle to secure the car
mount and adjust the angle of the car mount to fit your view.
Using Steps
1. Press the release button to release clamp arms.
| 2.
Slide in your cell phone then press the clamp arms with force to adjust the
width.
---|---
3. Easily slide phone out or press the release button to take your phone.
Specifications
| Product Name | Car Mount |
|---|---|
| Model | CTEZB08 |
| Applicable Places | Dashboard/ Windshield/ Air Vent/ Desktop |
| Compatible Devices | 4.7-7 Inches Phone |
| Package List | Car Mount x l, |
Suction Cup x l,
Dashboard Pad x l,
Air Vent Clip x l,
User Guide x l
The parameters above are derived from the laboratory of VICSEED. The actual parameters may differ from product to product or other factors. All images shown here are for reference only.
Customer Service
12-month limited warranty
Lifetime technical support
support@vicseed.com
@vicseedglobal
For more information, please visit: www.vicseed.com
SHENZHEN HOMGMI TECHNOLOGY CO., LTD.
Add : RM1503, BLK C, Zhantao Technology BLDG, Minzhi Avenue,
Minzhi ST, Longhua DIST, Shenzhen, China
Email : support@vicseed.com
Web : www.vicseed.com
Shenzhen Homgmi Technology Co., Ltd. All Rights Reserved.
Made in China
Documents / Resources
|
vicseed CTEZB08 Car
Mount
[pdf] User Guide
CTEZB08, Car Mount
---|---
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>