POVISON TS1021BL Modern TV Stand for Projector Instruction Manual

POVISON TS1021BL Modern TV Stand for Projector

Product Information

Specifications

• Product Model: TS1021BL
• Installation : Requires 2 people
• Drawer Quantity: 3
• Drawer Bottom Buffer Guide Rail: Two-section
• Drawer Disassembly Buckle : Included
• Hexagonal Wire Quantity: 8 (M8*30mm)

Product Usage Instructions

Installation

1. Take out the drawers from the cabinets.
2. Locate the holes in the inner panels of the cabinets on both sides.
3. Insert the hexagonal wire into the holes and connect it with the middle cabinet.
4. Combine the three cabinets and put the drawers back in place.
5. The installation is complete.

Drawer Disassembly and Assembly

Note : Please read the manual carefully before proceeding with drawer disassembly and assembly.

Disassembly:

1. Pull out the disassembly buckles located below the drawer.
2. Gently pull up the drawer, and then remove it.

Assembly:

1. Pull out the disassembly buckles located below the drawer.
2. Check and ensure that the disassembly buckle has been pulled out.
3. Hold the drawer and align the holes on the drawer with the two-section bottom buffer guide rail.
4. Press down the buckle to secure the drawer in place.
5. Repeatedly push and pull the drawer 2-4 times to ensure proper installation on the guide rail. If not properly installed, remove the drawer and reinstall.

Installation Instruction

TS1021BL Installation
The number of people needed for installation: 2

1. Please read the manual carefully before installing this product. And strictly follow the installation process
2. Please take good care of this manual for your next installation

Parts list

Serial number|

Shape

|

Name

|

Quantity

---|---|---|---

A

|

| Hexagonal wire

（M8*30mm）

|

8

1. Take out the drawers on the cabinets.
2. Find the holes in the inner panels of the cabinets on both sides, put in the hexagonal wire, and connect with the middle cabinet. After combining the three cabinets, just put the drawer back.
3. The installation is complete.

Disassembly and assembly instructions for two bottom buffer rail drawers

1. Two-section bottom buffer guide rail.
2. The way to teardown drawer:
   • Pull out the disassembly buckles
   • Pull out the disassembly buckle of the two guide rails below the drawer at the same time. Gently pull the drawer up, and then you can take the drawer down.
3. The way to install drawer:
   • Pull out the disassembly buckles
   • Corresponding hole location
   • Bottom of drawer
   • Check and make sure the disassembly buckle has been pulled out.
   • Hold the drawer, put the holes on the drawers into the two-section bottom buffer guide rail, and then press down the buckle to remove it.
   • Pull out the disassembly buckles
   • Repeatedly push and pull the drawer (2-4 times) to check whether the drawer has been install on the guide rais properly. If not , remove the drawer and reinstall.

FAQ’s

How many people are needed for installation?

Two people are required for installation.

What should I do if the drawer is not properly installed?

If the drawer is not properly installed on the guide rail, remove the drawer and reinstall it.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>