POVISON DL002A Desk Lamp User Manual
- June 6, 2024
- POVISON
Table of Contents
User Manual
DESK LAMP
MODEL NO: DL002A
+1888 666 9122
customerservice@povison.com
DL002A
Packing List: Desk Lamp + Base + Metal Parts + Adapter + User Manual
Specification
| Input Voltage | 12V 2A |
|---|---|
| Material | Metal + ABS+PC |
| Light Source | 36pcs LED |
| Power Consumption | 10W |
| Luminous Flux | 440lm |
| Ra | 90 |
| Color Temperature | 3000K-5500k |
| Operating Temperature | -10～40℃ |
Installation
It’s very easy to install, as shown above: Insert the lamp arm into the lamp holder and tighten it with a hexagon screw from the bottom.
Product Care
- Please read the user manual before use.
- Don’t install the lamps above high-temperature objects or in damp places. (don’t install it above the stove, gas, and exhaust pipe to prevent damage.)
- When the lamp is abnormal, cut off the power supply quickly.
Button Guide
- On/Off: Single-click the button to turn on/off the light. Double click the button to adjust the color temperature.
- Reduce brightness: Single click the “-” to reduce brightness. Long press the button for stepless brightness decrease
- Improve brightness: Single click the “+” to improve brightness. Long press the button for a step-less brightness increase.
Function Guide
NOTICES
- Please fasten the screw between the base and lamp arm to prevent a loose connection.
- After connecting to the power supply, the touch button of the on/off button is on.
- When the phone is charging, the touch button flashes regularly.
- When the phone doesn’t match with the wireless charger, the touch button flashes quickly.
FCC STATEMENT
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions:(1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Any Changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment. This
equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more
of the following measures:
– Reorient or relocate the receiving antenna.
– Increase the separation between the equipment and receiver.
– Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
– Consult the dealer or an experienced radio/TV technician for help.
The device has been evaluated to meet general RF exposure requirements. The
device can be used in portable exposure conditions without restriction.
FCC RF exposure statement:
The equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. During the operation of the device, a distance of 15
cm surrounding the device and 20 cm above the top surface of the device must
be respected.
URL:www.povison.com
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>