POVISON TS1021BL Modern TV Stand with Projector Shelf Instruction Manual
- June 2, 2024
- POVISON
Table of Contents
POVISON TS1021BL Modern TV Stand with Projector Shelf
Product Information
Specifications:
- Product Name: TS1021BL Installation Cabinet
- Drawer Type: Three-section side-mounted rail drawer
- Includes: Hexagon socket machine screws, gasket, wrench
- Number of People Needed for Installation: 2
Product Usage Instructions
Installation Instructions:
- Take out the drawers on the cabinets.
- Locate the holes in the inner panels of the cabinets on both sides, insert hexagon socket head screws, and connect with the middle cabinet. After the three cabinets are put together, just put the drawers back together.
- There is an adjustable buffer at the bottom of the middle cabinet drawer. Turn the adjustable drawer left and right to pull the buffer.
- Before installation, screw all the screws to 1/2 of the length of the installation. After all screws are half screwed in, tighten them all together.
Drawer Usage Instructions:
- To the teardown drawer: Pull the release buckle upwards while pulling another release buckle downwards.
- To install drawer:
- Open the drawer as far as possible.
- Pull the disassembly buckle upwards while pulling another disassembly buckle downwards to separate the drawer from the guide rail.
- Align the two guide rail parts of the drawer and push the drawer forward to the bottom.
- Push and pull the drawer repeatedly (2-4 times) to check whether it is installed smoothly. If not, remove and reinstall the drawer.
FAQ
- Q: How many people are needed for installation?
- A: Two people are required for the installation of TS1021BL Installation Cabinet.
- Q: What should be done before tightening all the screws during installation?
- A: Before installation, screw all the screws to 1/2 of the length of the installation. After all screws are half screwed in, tighten them all together.
The number of people needed for installation：2
- Please read the manual carefully before installing this product. And strictly follow the installation process
- Please take good care of this manual for your next installation
- Note: Before installation, screw all the screws to 1/2 of the length of the installation. After all screws are half screwed in, tighten them all together.
Parts list
Installation Instruction
- Take out the drawers on the cabinets
- Locate the holes in the inner panels of the cabinets on both sides, insert hexagon socket head screws, and connect with the middle cabinet. After the three cabinets are put together, just put the drawers back together.
- There is an adjustable buffer at the bottom of the middle cabinet drawer.
- The installation is complete.
Disassembly instructions for three-section side-mounted rail drawer
- Three-section side-mounted rail drawer.
- How to teardown drawer
- Pull the release buckle upwards, while pull another release buckle downwards
- Open the drawer as far as possible. Pull the disassembly buckle upwards, while pull another disassembly buckle downwards. Separate the drawer from the guide rail.
- How to install drawer:
- Align the two guide rail parts of the drawer, and then push the drawer forward to the bottom
- Push and pull the drawer repeatedly (2-4 times) to check whether the drawer is installed smoothly. If not, remove the drawer and install it again.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>