NokBabo f109ats+r iPad Keyboard Case with Touchpad User Manual

NokBabo f109ats+r iPad Keyboard Case with Touchpad

*Make sure keyboard is fully charged when you connect it to your iPad. Charging 2-3 hours first when you newly get it is advised.

*The keyboard is not waterproof. Please kindly pay attention to get away the keyboard from the water.

Make sure you get right model keyboard

1. Find your iPad model number in settings:
   1>> Settings>General>About
   2>>Tap on the model number and a model number in the form of AXXXX will appear

2. Find your iPad model number AXXXX on the back of your iPad

10.2/10.5 inch Hard Case/Leather Case Compatible iPad Model

iPad 9th Generation 10.2 inch 2021 (A2602/A2603/A2604/A2605)
iPad 8th Generation 10.2 inch 2020 (A2270/A2428/A2429)
iPad 7th Generation 10.2 inch 2019 (A2197/A2200/A2198)
iPad Air 10.5 inch 3rd Generation 2019 (A2152/A2153/A2123)
iPad Pro 10.5 inch 2017 (A1701/A1709)

10.9/11 inch Hard Case Compatible iPad Model

iPad Air 10.9 inch 4th Generation 2020(A2072/A2316/A2324/A2325)
iPad Pro 11 inch 3rd Generation 2021 (A2301/A2459/A2460/A2377)
iPad Pro 11 inch 2nd Generation 2020 (A2228/A2068/A2230)
iPad Pro 11 inch 1st Generation 2018 (A1876/A2014/A1895)

10.9 inch Leather Case Compatible iPad Model

iPad Air 10.9 inch 4th Generation 2020(A2072/A2316/A2324/A2325)

12.9 inch Hard Case/Leather Case Compatible iPad Model

iPad Pro 12.9 inch 5th Generation 2021 (A2379/A2461/A2462/A2378)
iPad Pro 12.9 inch 4th Generation 2020 (A2069/A2229/A2232/A2233)
iPad Pro  12.9 inch 3rd Generation 2018 (A1876/A1895/A1983/A2014)

**** Package Inside

Keyboard

Type C Charging Cable

User Manual

Wireless Connection

1. Make sure your iPad ios system up to 13.2.2 or above & iPad Assistive Touch toggle function on. Setting/Accessibility/Touch/AssistiveTouch/AssistiveTouch On

2. (Below picture is for 10.2/10.5 inch, 10.9/11 inch, 11 inch keyboard) Press the power button for 3 sec to turn on the iPad keyboard (indicators will flash once and keyboard backlight will turn on, backlight will turn off automatically later).
   
   The on/off button of 12.9 inch keyboard is on the right side of the gusset

3. (Below picture is for 10.2/10.5 inch, 10.9/11 inch, 11 inch keyboard) Press pair button for 3 sec, blue indicator will flash which shows the keyboard is on pairing mode for 3 min.
   
   For 12.9 inch keyboard, you need to press “fn” and “C” together, blue wireless indicator will flash which shows the keyboard is on pairing mode.

4. Turn on your iPad Bluetooth, and search the “ipad keyboard.” on list, then tap it for connection.

5. Once the connection succeeds, blue wireless indicator won’t flash and keeps on.

Backlight instruction

Press ” fn” + (right side of space bar) to turn on the backlight. Press them again to increase the brightness. Press the third time to maximize the brightness. And the press fourth time to turn off the backlight. There are three brightness in total.
Press ” fn” + to change different rainbow colors. There are various rainbow colors for you to choose. Press ” fn” + “Q” to turn on the breathing backlight, backlight will flash at a rate. By pressing”fn” + “W”, you can change the rate of breathing backlight. By the way, pressing” fn” + “Q” also can turn on the backlight, and pressing them again will turn the backlight off.

NOTICE

1. Backlight will automatically turn off if there is no movement on keyboard over 5 sec, while it will light up again when you press any key.
2. Blue backlight will turn on when you turn on the iPad keyboard, and it will turn off automatically within 1 min. It’s a normal situation. Don’t worry about that.

VERY IMPORTANT: Keyboard will be in sleep mode if it doesn’t work over 10 min. In sleep mode, it will cut the connection between your iPad. The keyboard will wake up to back into work mode and connect to your iPad again when you press any key.

Touchpad instruction

Be sure that touchpad can be used on your iPad as below steps:

1>You need to complete below settings: Settings/Accessibility/Touch/AssistiveTouch/AssistiveTouch On
2>Make sure your iPad Software Version is up to 13.2.2 or above version.
3>Choose right “Keyboard” on your iPad General/Keyboard/Keyboards/English(US)/QWERTY
Notice: The third settings only can be set after keyboard connects to your iPad successfully.

You can adjust the cursor tracking speed as one of below settings:

1. Settings/Accessibility/Touch/AssistiveTouch
   On the bottom of this page, you can adjust tracking sensitivity, cursor will be slower when it’s closer to tortoise, and be more sensitive when it’s close to the rabbit.
   

2. Settings/General/Trackpad&Mouse
   You can adjust tracking sensitivity, cursor will be slower when it’s closer to tortoise and be more sensitive when it’s close to the rabbit. Notice: The second settings only can be set after keyboard connects to you iPad successfully.

If you don’t use trackpad, you can press “fn” and “T” together to lock the trackpad. And you can press “fn” and “T” to unlock the trackpad.

Touchpad Gesture Description

One Finger

Left-click (customizable): Tap with one finger  to click

Slide the pointer: Move with one finger

Drag items: Tap twice with one finger, then hold and drag around

Slide over Switcher: Slide one finger down from the top edge of the screen to see all active apps

To see the Dock while you’re using an app: slide one finger up from the bottom edge of the screen until the Dock appears, then releas

Double Fingers

Pay attention to:Slide your fingers from right to left

Switch window to left: Swipe from left to right with both fingers

Right-click (customizable): Tap with two fingers  to right-click

Roller scroll: Swipe with two fingers to the left/right or scroll\ up/down

Zoom in/out

Three Fingers

Open the recently used window:(Switch back to the previous application window) Three fingers moving down at the same time

Return to the home page:All three fingers moving up at the same time

Active window (left/right slide switch) Slide three fingers simultaneously left and right

Four Fingers

Screenshot: Tap with four fingers

Keys functions

For 10.2″ 10.5″ 10.9″ 11″keyboard

1. Home (Displays the iPad home screen)
2. Darker
3. Brighter
4. Virtual keyboard
5. Search (Launch the iPad search function)
6. Back
7. Play/Pause (Note: third party player video is not supported)
8. Forward
9. Mute
10. Volume down
11. Volume up
12. Lock screen (Click on the lock screen)
13. Pair code (Keep pressing for 2 seconds)
14. Power button (Keep pressing for 3 seconds to turn on/off; To check power status, press the key and hold 1 second)

For 12.9″ keyboard

1. Home (Displays the iPad home screen)
2. Darker
3. Brighter
4. Enable iPad search
5. Switch the language
6. Virtual key board
7. Select all
8. Copy
9. Paste
10. Cut
11. Back
12. Play/pause (Note:third party player video is not supported)
13. Forward
14. Mute
15. Volume down
16. Volume up
17. Fn+Lock screen
18. Delete
19. Tab
20. Caps lock

Special key instructions

1. Switch input method by pressing

2. Turn on/off or adjust the backlit brightness.
   Operating method: Press once to turn on the backlit, press againto increase the brightness, press the third time to maximize the brightness, press the fourth time to turn off the backlit.

3. Press these two keys to switch the rainbow backlight and blue color

4. To type the character in below grey area, hold shift and press the desired character.

5. Some special short characters
   Select All Cut Copy Paste

6. Breathing lamp mode:
   turn on breathing backlights
   change breathing backlight rate

7. Fn+PgUp=Home    Fn+PgDN=End ( Only for 12.9″)

Space bar problem-Space bar doesn’t work or Insert period

Settings/Accessibility/Keyboards/Full Keyboard Access/Commands/(INTERACTION) Activate “Clear”

“.” Shortcut is on in default status that double tapping the space bar will insert a period followed by a space, you can turn it off as below settings: General/Keyboard/Hardware Keyboard/”.” Shortcut Off

Caps Locks key changes language

General/Keyboard/Hardware Keyboard/Caps Lock Language Switch Off

Question about charging

When red flight flashes, it shows your keyboard is on low-battery status. You can find Type-C charging cable in package to charge for it. Red indicator will stay on when charging and turn green once fully charged.

NOTICE: If you don’t use it normally, please charge the keyboard regularly, once in a month is advised by BABG.

Troubleshooting

1. Keyboard can’t connect to your iPad when you first get it.
   Charge keyboard case first until it’s fully charged.
   Please click “forget this device” to delete all the devices on your iPad Bluetooth list, then restart your iPad and keyboard. Connect them again.
   If the problem is still alive, please kindly contact seller.

2. Touchpad doesn’t work.
   Make sure your iPad software version is 13.2.2 or above. Touchpad function just works with iPad 13.2.2 or above version.
   Make sure iPad AssistiveTouch is on. It always be off in default status. Please go to the iPad accessibility setting to check if the iPad AssistiveTouch is on.
   The touchpad can be locked by pressing “fn”+”T”, you can press them again to check whether touchpad is locked or not.
   More details, please kindly check previous “Touchpad instruction”
   If the problem is still alive, please kindly contact seller.

3. Some characters can’t work.
   Turn the keyboard off first and turn on it again.
   If the problem is still alive, please kindly contact seller.

4. Why I press A but get a Z.
   Go to Settings/Keyboard/Keyboards/English(US)/QWERTY

5. Space bar doesn’t work.
   You can try below settings first Settings/Accessibility/Keyboards/Full Keyboard Access/Commands/ Then change settings for “Space” from “activate” to “Clear”. If it comes back, then you can also turn OFF Full Keyboard Access. Once it is cleared, the space bar would work fine
   More info, please kindly check above “Space bar problem-Space bar doesn’t work or Insert period”

6. If there is delay after you press keys, please kindly check one of iPad Settings as below: Settings/Accessibility/Keyboards/Slow Keys Off Settings/Accessibility/Keyboards/Slow Keys On 0.1 Seconds

7. If there is repeated characters after you press certain key, pleas kindly check one of iPad Settings as below: Settings/Accessibility/Keyboards/Key Repeat On 0.1 Seconds Settings/Accessibility/Keyboards/Key Repeat Off

8. Keyboard can’t hold a charge. Please change another charging cable to test. If is still not workable, maybe there is problem with battery, please kindly contact after-sale team [email protected] with your order ID for a new replacement. May it help to you.

9. Can’t find charging cable in package, you can see below picture. If there is no charging cable in white box, just contact seller on Amazon or our after-sale email [email protected].
   

10. Don’t know how to remove the case.
    Please check the instruction video: https://youtu.be/hemjRHQBWsE

**** Contact us

If you have any issues or questions, please let us know ASAP! We would love to get you taken care of and happy right away! Every unit comes with a full 12-month warranty, so you can relax and take comfort in your purchase.

For the fastest & friendliest support, contact us via one of below contact methods.
Our email support is open 24/7/365.
Email: [email protected]
Facebook Page: Nokbabo

References

• keyboard Disassembly 01 - YouTube

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>