Andobil LT-K2VD Car Vent Phone Mount User Manual
- June 6, 2024
- Andobil
Table of Contents
Andobil LT-K2VD Car Vent Phone Mount User Manual
Installation Steps
-
Unscrew the fixed nut from the car mount and remove it.
-
Pass the ball joint through the fixed nut from the smaller opening side.
-
Push the ball joint firmly into the groove on the back of the car mount, then tighten the fixed nut.
-
Twist the knob to expand the hook.
-
Firstly, insert the car mount into a proper position of the air vent, to hook the airvent blade sturdily. Then fix the support plate and tighten the knob to lock the car mount. Finally, adjust the car mount to fit your optimal viewing angle.
Using Steps
-
Press the quick release button, the clamps arms will automatically open. Then, adjust the legs (bottom tray) according the size of your phone, tighten up the clamps arms to hold your phone firmly.
-
Find the press position (A dent place with tiny microdots on the side of clamp arms) and then push the clamp arms to tighten your phone firmly.
-
After using, press the quick release button again to open the clamp arms and take out the mobile phone (as shown in the figure).
Overview
Specifications
Product Name | Easy Clip Car Mount |
---|---|
Model | CTEZ11 |
Applicable Place | Air Vent |
Applicable Model | Mobile phone width (60-100) mm and |
thickness 15mm
Package List| Car Mount xl, Air Vent Clip x1,
Welcome Guide x1
The parameters above are derived from the laboratory of ANDOBIL. The actual parameters would be different because of products and other factors. The image shown here is indicative only.
Attentions
- Avoid dropping.
- Do not dismantle it.
- Please install the car mount on a suitable place before driving, do not operate or adjust the car mount during driving.
- Do not install the car mount in places where it might interfere with airbag or driving.
- Keep the car mount away from children.
For FAQs and more information, please message us:
Facebook: @Andobil
Twitter: @Andobil
Google+: Andobil
Linkedin: Andobil
Shenzhen Andobil Technology Co., Ltd.
Add: RM1413, BLK C, Zhantao Technology BLDG, Minzhi Avenue, Minzhi ST, Longhua DIST, Shenzhen, China
Web: www.andobil.com
Email: support@andobil.com
Andobil Is The Trademark Registered In U.S And Other Countries. All Rights
Reserved.