Andobil Newest Alloy Folding Magsafe Car Mount User Manual

Table of Contents

Overview

This car holder has the following three use situations, please choose the corresponding way to use it according to your mobile phone model.
CD

iPhone 12/13/14 without case: Directly Work without Metal Ring
!Phone 12/13/14 with magnetic case: Directly Work without Metal Ring
Other situations: it shall be used with metal ring The metal ring must stick outside of the flat phone case
- a. Phone 12/13/14 and above models with non-magnetic case
- b. Other mobile phones
- c. Other mobile phones with non-magnetic case

There are two ways to paste the metal ring, which are listed as follows. Please choose between them according to your needs.

Note:

To ensure the magnetic force, it is recommended that you paste the metal ring on the back of the phone case.
Please paste the metal ring on the phone case with a flat and smooth back surface. We Don’t recommend you paste the metal ring on the phone case with uneven surtaces, or that will affect the magnetic force.
Please use the phone’s match-up card to aim at the position before pasting the metal ring.

Installation steps:

Use a cleaning wipe to clean the back of the phone (Of the phone case) where the metal ring needs to be pasted.
If use a phone case, INSTALL the metal ring OUTSIDE of the phone case.
Unfold the match-up card.
Align the circle of the match-up card to the center of the phone and make sure the length from the edge of the circle to the left and right, top and bottom edges of the phone are the same.
Tear off the protective cover of the metal ring and paste the metal ring onto the center of your phone/phone case.
Press firmly along the magnetic ring to secure it.
Remove the match-up card, and the installation is completed.
Note: After pasting the magnetic ring, please wait for 24 hours.

Clean the dashboard where you need to install the car holder with a cleaning kit, and wait for It to dry.
Tear off the release paper of 3M adhesive from the base of the car holder.
Attach the base on the cleaning area and press it firmly for more than 20 seconds to fix It.
You can rotate and adjust the car holder angle from multiple angles to achieve the best viewing angle.
Let it sit for 24 hours and then put the phone on it to start using!
When not in use for a long time, you can fold and store the car holder as a beautiful decoration.

Attentions

Avoid dropping.
Do not disassemble.
Do not install it while driving.
Do not install the car mount in places which interfere with air bag or driving.
Please keep this product away from any magnetic items, otherwise, demagnetization might happen.
Keep the car holder away from children.
Please keep the extra metal ring and 3M adhesive for future use.

Two methods to get product installation videos:

Shenzhen Andobil Technology Co., Ltd.

Add: RM1407, BLK C, Zhantao Technology BLDG, Minzhi Avenue, Minzhi ST, Longhua DIST, Shenzhen, China
Web: www.andobll.com
Email: support@andobil.com
Andobil Is The Trademark Registered In the U.S. and Other Countries. All Rights Reserved.