DENON DJ PRIME SC5000 User Guide

DENON DJ PRIME SC5000

Introduction

Thank you for purchasing the SC5000M PRIME. At Denon DJ, we know how serious music is to you. That’s why we design our equipment with only one thing in mind—to make your performance the best it can be.

Features:

• Motorized platter with real 7″ vinyl
• 7″ HD display with multi-touch gestures
• 24-bit/96kHz digital audio outputs
• Dual-layer playback with individual audio outputs
• Play uncompressed audio formats (FLAC, ALAC, WAV, AIFF)
• 8 multifunction triggers for cues, loops, slices and rolls
• Customizable RGB color around the jog wheel
• (3) USB and (1) SD input for music playback
• LAN output to link to up to four players
• Includes Engine PRIME music management software

Box Contents

• SC5000M PRIME
• Platter Assembly
• Aluminum Platter
• Slipmat
• Vinyl with Spindle Lock Adapter and Spindle Screw (attached)
• Allen Wrench
• (2) RCA Audio Cables (stereo pairs)
• USB Cable
• USB Extension
• Cable Networking
• Cable Power
• Cable
• Cleaning Cloth
• Software Download
• Card User Guide
• Safety & Warranty Manual

Support

For the latest information about this product (documentation, technical specifications, system requirements, compatibility information, etc.) and product registration, visit denondj.com.
For additional product support, visit denondj.com/support.
Product Registration
Your product may include exclusive software and/or promotions which can only be accessed by registering your new product on the Denon DJ website.
To check eligibility and access the available content, please register your product by following the instructions below:

1. Visit denondj.com and click Account.
2. Click Sign In to access your existing account, or create a new account.
3. Once signed in, click Register New Product.
4. Enter the product serial number into the box and click Check Serial.
5. Complete the form and click Register Your Product.
6. Upon successful registration, any applicable software downloads, exclusive content, and promotional offers will be shown in your account.

Setup

Assemble the Platter System

1. 1. Remove the SC5000M base from the packaging. Remove the platter assembly from the package (underneath SC5000M). Place SC5000M on a flat, stable surface for assembly and operation.

2. Place the platter onto the SC5000M base by aligning the pins in the bottom of the platter with the holes in SC5000M’s motor. Press it down firmly. Check to make sure that it rotates uniformly and does not wobble excessively.

Place the slipmat onto the platter, then place the vinyl over the slipmat.

1. 1. Line up the notch in the spindle with the screw in the spindle lock adapter. Use the allen wrench (included) to tighten the screw, locking the adapter to the spindle.

Note: By pressing down on or lifting up the vinyl while you tighten the spindle screw, you can adjust the slip friction to your preferred feel.

Connect and Start DJing!

Important: Occasionally, we may update SC5000M PRIME’s firmware to add exciting new features and improvements. Visit denondj.com/downloads to check for available firmware updates, especially after you update your software (firmware updates may address new software features).

1. Visit denondj.com/downloads and find the DJ Software section to download the Engine PRIME software.

2. Double-click the .exe (Windows®) or .dmg (macOS®) installer file you downloaded, and then follow the on-screen instructions to install Engine PRIME.

3. Make sure all of your devices are powered off or all of their volume levels are at their minimum positions.

4. Connect SC5000M PRIME’s audio outputs (Layer A/B or Digital Outputs A/B) to the inputs of your mixer.

5. Connect SC5000M PRIME’s Link ports according to one of the following connection diagram examples.

6. Connect any output devices (turntables, headphones, power amplifiers, loudspeakers, etc.) to the outputs of your mixer.

7. Connect all of your devices to power sources.
   • When starting a session, power on (1) SC5000M PRIME and other input sources, (2) your mixer, and then (3) output devices.
   • When ending a session, power off (1) output devices, (2) your mixer, and then (3) SC5000M PRIME and other input sources.

8. To use Engine OS (standalone playback): Insert a USB flash drive or SD card (with an Engine-configured music library) to one of SC5000M PRIME’s USB ports or SD Card Slot.

Connection Diagrams

Items shown but not listed under Introduction > Box Contents are sold separately.
Example 1
This example shows 2 SC5000M PRIME units with their Link ports connected to each other directly.

Example 2
This example shows 4 SC5000M PRIME units with their Link ports connected to Link Ports 1–4 of a Denon DJ mixer. All 4 units are networked through the mixer.
Note: If you will use a different mixer with this setup, connect the Link ports all 4 SC5000M PRIME units to an Ethernet hub instead of to the mixer.

RF Warning: This is a mobile device. Maintain a distance of at least 8 inches / 20 centimeters of separation between the transmitter’s radiating structure(s) and your body or other people nearby.

Devices & File Analysis

SC5000M PRIME can play music files from USB drives, SD cards, or other connected SC5000M PRIME units. Make sure you are using only the supported file systems (for USB drives or SD cards) and file formats (for music files) listed below.

Supported file systems: exFAT, FAT32
Supported file formats: AAC/M4A

Although SC5000M PRIME can play tracks that have not been analyzed yet, pre- analyzing them allows its features to work most effectively. You can analyze tracks in one of two ways:

• On SC5000M PRIME, load the track: When you load a track to play, SC5000M PRIME will automatically analyze it (if it has not already been analyzed). This may take a moment to complete, depending on the length of the track. You can start playing the track from the beginning immediately, though you will need to wait a moment for the analysis to finish.
• Use Engine PRIME software: The included Engine PRIME software can pre-analyze your music library to use with SC5000M PRIME. You can also use it to organize your library by creating crates and playlists. It also manages your SC5000M PRIME hardware preferences (see Operation to learn more about this). Visit denondj.com/downloads and find the webpage for DJ Software to download the Engine PRIME software.

To eject a USB drive or SD card:

1. Make sure none of its tracks are being played on any connected SC5000M PRIME units.
2. Press Media Eject. A list of connected devices will appear in the touchscreen.
3. Tap the Eject icon on the touchscreen next to the name of your device. If a track on the device is currently playing, you will be asked if you want to continue ejecting, which will stop the track. Tap Cancel to cancel ejecting the device, or tap OK to eject it.

To eject additional devices, repeat Step 3.
To return to the previous screen, press Media Eject again, or tap the X in the upper-right corner.

Networking

You can network multiple SC5000M PRIME units together, enabling them to share track databases, timing and BPM information, and other data seamlessly over this connection.
This feature provides many advantages while performing. For instance, if you are using four SC5000M PRIME units, you can use one of them to browse through all tracks on all devices (USB drives or SD cards) connected to any of those SC5000M units. You can then play any of those tracks immediately without having to move a device from one unit to the other.
To network SC5000M PRIME units together, use the included networking cables to do one of the following:

• If you are using only two SC5000M PRIME units, connect their two Link ports.
• If you are using two or more SC5000M PRIME units, connect each of their Link ports to a Link port (1–4) on your Denon DJ mixer.
• If you are using two or more SC5000M PRIME units, connect each of their Link ports to an Ethernet port on a router.

The Network (Media Status) light will turn on when the SC5000M PRIME unit is properly connected to a network.

Configuration

The SC5000M PRIME has several settings that help you customize playback and how information is displayed.

To open a quick menu of settings most often used, press Shortcuts.
To open the full list of preferences, press and hold View/Preferences/Utility. See Operation > Configuration to learn about these settings.

Features

Top Panel

Media Selection & Browsing 

1. Touchscreen: This full-color multi-touch display shows information relevant to SC5000M PRIME’s current operation. Touch the display (and use the hardware controls) to control the interface. See Operation > Touchscreen Overview for more information.

2. Media Selection: These lights will illuminate to indicate if the corresponding type of media is connected: USB, SD, or Network.

3. Source: Press this button to show a list of available devices connected to SC5000M PRIME in the touchscreen (other networked SC5000M PRIME units, USB drives, SD card, etc.). Tap a device in the list to select it.

4. Media Eject: Press this button to show a list of available devices connected to that SC5000M PRIME unit in the touchscreen (i.e., USB drives connected to its USB ports or an SD card inserted into its SD card slot).
   To eject a device, make sure none of its tracks are being played, and then tap the Eject icon on the touchscreen and follow the prompts.

5. Back: While in Browse View, press this button to move to the previous window. While in Performance View, press this button to enter Browse View.

6. Forward: While in Browse View, press this button to move to the next window. While in Performance View, press this button to enter Browse View.

7. Select/Load: While in Browse View, turn this knob to scroll through a list, and press the knob to select an item or load a track to the layer in focus. Double-press the knob to load a track to both layers (“instant doubles”).
   While in Performance View, turn this knob to zoom in and out of a track’s waveform. Press and hold the knob to adjust the beat grid (see Operation > Performance View for more details on adjusting the beat grid).

8. View/Preferences/Utility: Press this button to switch between the library view and track view. Press and hold this button to enter the Preferences and Utility window.
   Press and hold Shift and press this button to toggle between viewing single layer or dual layer waveforms on the display. You can also press and hold Shift and then press and hold this button to swap deck positions.

9. Shortcuts: Press this button to acess a short menu of playback and display options.
   Playback & Transport Controls 

10. Layer: Press this button to switch the layer focus of the SC5000M PRIME.

11. Platter: This 7″ motorized platter controls the audio playhead in the software, and can be used to scratch and spin or act as a static pitch platter depending on the setting of the Motor button.

12. Torque Adjust: Flip this rotary switch to adjust the torque of the platters. At the high setting, the platters will have the heavier, stronger feel of “modern” turntables. At the normal setting, they are lighter and more graceful—the feel of a “classic” turntable.

13. Stop Time: Controls the rate at which the track slows to a complete stop (“brake time”) when you pause it by pressing Play/Pause (/).

14. Motor: Press this button to activate or deactivate the platter motor. When the motor is activated, the platter will spin and scratch like a turntable.
    When the motor is deactivated and audio is playing, move the platter to temporarily adjust the track’s speed, which is useful for beat alignment. When deactivated and audio is paused, move the platter to scratch the track. Audio will not be interrupted if the motor is activated during playback.

15. Play/Pause (/): This button pauses or resumes playback.
    Press and hold Shift and then press this button to “stutter-play” the track from the initial cue point.

16. Cue: During playback, press this button to return the track to the initial cue point and stop playback. If you have not set a temporary cue point, then press this button to return to the start of the track. (To set a temporary cue point, make sure the track is paused, move the platter to place the audio playhead at the desired location, and then press this button.)
    If the deck is paused, press and hold this button to play the track from the initial cue point. Release the button to return the track to the initial cue point and pause it. To continue playback without returning to the initial cue point, press and hold this button and then press and hold the Play button, and then release both buttons.
    During playback, press and hold Shift and then press this button to set the initial cue point.

17. Track Skip: Press either of these buttons to skip to the previous or next track.
    Press the Previous Track button in the middle of a track to return to the beginning of the track.
    Sync & Pitch Controls 

18. Pitch Fader: Move this fader to adjust the speed (pitch) of the track. You can adjust its total range by pressing and holding Shift and pressing one of the Pitch Bend buttons.
    Important: If Sync is activated, moving the pitch fader on the “master” SC5000M PRIME unit will change the speed of all synced units, while moving the pitch fader on other units will do nothing.

19. Pitch Bend –/+: Press and hold one of these buttons to momentarily reduce or increase (respectively) the speed of the track.
    Press and hold Shift and then press one of these buttons to set the range of the pitch fader.

20. Key Lock/Pitch Reset: Press this button to activate or deactivate Key Lock. When Key Lock is activated, the track’s key will remain the same even if you adjust its speed.
    Press and hold Shift and press this button to reset the track’s pitch to its original pitch (0%) regardless of the position of the pitch fader.

21. Sync/Sync Off: Press this button to activate Sync.
    To sync two or more SC5000M PRIME units, press Sync on the unit that you want to control the BPM, which becomes the “master.” After Sync is activated on that unit, press Sync on any additional units. The tempo of each unit will immediately synchronize to match the tempo of the master unit.
    To deactivate Sync, press the Sync button again, or press and hold Shift and press Sync, depending on the setting of Sync Button Action in the Preferences.

22. Master: Press this button to set this SC5000M PRIME unit as the one that controls the master tempo. All connected SC5000M PRIME units with Sync activated will use this tempo. If you stop the “master” SC5000M PRIME, the next-longest-playing SC5000M PRIME in the setup will automatically become the new “master” (unless you change it manually).
    Performance Controls

23. Shift: Press and hold this button to access secondary functions of other controls.

24. Slip: Press this button to enable or disable Slip Mode. In Slip Mode, you can jump to cue points, use the platters, or pause the track while the track’s timeline continues (the lower half of the waveform in the display will continue moving forward). In other words, when you stop whatever action you are performing, the track will resume normal playback from where it would have been if you had never done anything (i.e., as if the track had been playing forward the whole time).

25. Censor/Reverse: Press this button to activate or deactivate the Censor feature: the playback of the track will be reversed, but when you release the button, normal playback will resume from where it would have been if you had never engaged the Censor feature (i.e., as if the track had been playing forward the whole time).
    Press and hold Shift and then press this button to reverse the playback of the track normally. Press this button again to return playback to the normal forward direction.

26. Performance Pads: These pads have different functions on each deck depending on the current pad mode. See Operation > Performing > Pad Modes for more information.

27. Hot Cue: Press this button to enter Hot Cue Mode.

28. Loop: Press this button once to enter Manual Loop Mode. Press it once more to enter Auto Loop Mode.

29. Roll: Press this button to enter Roll Mode.

30. Slicer: Press this button to enter Slicer Mode, and press it again to enter Slicer Loop Mode.

31. Parameter /: Use these buttons for various functions in each Pad Mode.

32. Loop In/Loop Out: Press either of these buttons to create a Loop In or Loop Out point at the current location. Their placement will be affected by the Quantize and Smart Loops settings. See Operation > Configuration > Shortcuts for more information.

33. Auto Loop/Loop Move: Turn this knob to set the size of an automatic loop. The value will be shown in the touchscreen and platter display.
    Press this knob to activate or deactivate an automatic loop at the current location of the track.
    Tip: You can assign auto loops to pads in Manual Loop Mode. See Operation

    Performing > Pad Modes for more information. Press and hold Shift and turn this knob to shift the active loop to the left or right.

34. Beat Jump: Press either of these buttons to skip backward or forward through the track. Use the Auto Loop knob to determine the beat jump size.
    Press and hold Shift and then press one of these buttons to search backward or forward through the track.

Front Panel

1. Front USB Port: Connect a standard USB drive to this USB port. When you select that USB drive as a source (press the Source button), you can use the display to select and load tracks on your USB drive. There are also two similar USB ports on the rear panel. You can use the included USB extension cable to accommodate larger or smaller USB thumb drives.
2. SD Card Slot: Insert a standard SD or SDHC card to this slot. When you select that SD card as a source (press the Source button), you can use the display to select and load tracks on your SD card.

Rear Panel

1. Power Input: Use the included power cable to connect this input to a power outlet.
   SC5000M PRIME has a protection circuit to safely eject all media after an unexpected power loss to protect your data from corruption. Reconnect your power source to return to normal operation.

2. Power Button: Press this button to power SC5000M PRIME on or off. Power on SC5000M PRIME only after you have connected all of your input devices and before you power on your amplifiers and loudspeakers. Power off your amplifiers and loudspeakers before powering off SC5000M PRIME.
   Press and hold this button for 10 seconds to reset SC5000M PRIME.

3. Link Port: Use the included networking cable to connect this port to another SC5000M PRIME or to your Denon DJ mixer. Each networked SC5000M PRIME can share track databases, timing and BPM information, and other track data over this connection.

4. USB Port to PC (USB Out): Use a standard USB cable (included) to connect this USB port to an available USB port on your computer. This connection sends and receives MIDI messages to and from the computer.

5. Rear USB Ports 2/3: Connect standard USB drives to these USB ports. When you select one of those USB drives as a source (press the Source button), you can use the display to select and load tracks on your USB drives. There is also a similar USB port on the front panel.

6. Layer A/B Outputs: Use standard RCA cables to connect these outputs to your DJ mixer. The A Line Outputs send out the audio signal from Layer A. The B Line Outputs send out the audio signal from Layer B.

7. Digital Outputs A/B: Use standard digital coaxial cables to connect these 24-bit/96 KHz outputs to devices and mixers such as the Denon DJ X1850 PRIME mixer.

8. Remote Input: Use a standard remote start cable to connect this input to the remote-start output of your mixer (if available). While connected to a remote-start-compatible mixer, moving the crossfader toward the side that corresponds to this SC5000M PRIME (or raising the channel fader for its channel) will automatically start the track on the currently selected layer.

9. Kensington® Lock Slot: Use this slot to secure SC5000M PRIME to a table or other surface.

Operation

Touchscreen Overview

Performance View

Swipe left or right on the track overview to scan through the track while the track is paused.
Note: You can use this feature this during playback if Needle Lock is off. If Needle Lock is on and Motor is on, stopping the platter with your hand or palm will allow you to swipe through the track overview. See Configuration Preferences to learn about Needle Lock.

Spread or pinch your fingers on the waveform to zoom in or out of it, respectively. Alternatively, turn the Select/Load knob.
Tap an icon to select it (e.g., the icons for Crates, Playlists, Prepare List, Files, or Search on the left side).
Tap a button to activate or deactivate it (e.g., the Quantize, Continue, or Key Lock buttons).
Tap the time to switch between the elapsed time and remaining time.
Tap the key to show the Key Change Menu, where you can adjust the key of the track.
Press and hold Shift and press the View button to toggle between viewing single layer or dual layer waveforms in Performance View.

You can also show or hide the beat grid controls in Performance View. The beat grid is automatically detected and set when the track is analyzed.

To show the beat grid controls, press and hold the Select/Load knob for a second. Six buttons will appear at the bottom of the display, and the beat grid markers will appear on the waveform.
To reset the beat grid, tap Reset.
To shift the downbeats of the beat grid left or right (in one-beat increments), tap the < or > buttons, respectively, or turn the Select/Load knob.
To freely shift/“slide” the beat grid left or right, move the platter.
To halve or double the number of beat grid markers, tap /2 or X2, respectively.
To hide the beat grid controls, press the Select/Zoom knob or tap Done on the touchscreen.

Browse View

Use the Browse View to view your music library and load a track to the deck. You can also search through crates and playlists, add tracks to the Prepare list, and search through your tracks using sorting and filtering features.

Important: Visit denondj.com/downloads and find the DJ Software section to download the Engine PRIME software.
Use the six icons on the left side to navigate while in Browse View:

• Source: Use this option to select the source device to view tracks from, including your connected media devices and available streaming and cloud services. Tap the Source icon to show the list of available sources, and then tap to select. To enable streaming and cloud services, use the Utility menu.
• Crates: Your crates are collections of tracks arranged however you want. You may have crates for different genres or styles, for albums from a specific decade, etc. You can use the included Engine PRIME software to create crates to use here.
• Playlists/History: Your playlists are lists of tracks arranged in a specific order. You may have playlists for different types of clubs or events, for specific genres, etc. You can use the included Engine PRIME software to create playlists to use here. This is also where you can view the playback history. If there are no playlists, only the history will be shown in this view.
• Prepare: You can load tracks to the Prepare list so that you can refer to them later when you want to play them during your performance (rather than searching through your entire library for the next track to play).
• Files: Use this option to browse the list of all files on a USB drive or SD card.
• Search: Use this option to search through your tracks by keyword. The search results are based on the album name, artist name, track name, key, and tempo.

Swipe a list up or down to browse through it (e.g., your list of crates, your list of playlists, or your list of tracks). Alternatively, press the Back or Forward buttons to select a list, and then turn the Select/Load knob. Press and hold Shift and turn the Select/Load knob to scroll quickly through the list. You can also tap and drag the scroll bar on the right edge of the list.
Tap an icon or item in a list to select it. Alternatively, press the Select/Load knob.
Swipe a track to the right to load it to the deck. Alternatively, press the Select/Load knob or double-tap the track.
Swipe a track to the left to add it to the Prepare list. Alternatively, press and hold Shift and press the
Select/Load knob. Swipe a track to the left in the Prepare list to remove it.
Tap and hold your finger on a track to show its information window. Tap the information window to close it.
Tap the track art to preview the track. Tap again to stop the preview. While previewing, tap along the track entry to scan through the track.
Tap the Search field and use the keyboard that appears in the display to search through your tracks by keyword. The search results are based on the album name, artist name, track name, key, and tempo.

Performing

Loading & Removing Tracks
While viewing any track list:

• To load a track to the layer currently in focus on the deck, swipe the track to the right. Alternatively, press the Select/Zoom knob, or double-tap the track.
• To perform instant doubles (load the same track to both layers on the deck), double-press the Select/Zoom knob while the track is highlighted.
• To add a track to the Prepare list, swipe the track to the left. Alternatively, press and hold Shift and press the Select/Zoom knob.
• To show a track’s information, tap and hold your finger on it.

While viewing the Prepare list:

To remove a track from the Prepare list, swipe the track to the left.
To remove all tracks from the Prepare list, tap the Clear List icon in the upper-right corner of the touchscreen.

Searching & Filtering Tracks

• To search, tap the Search field and use the keyboard that appears in the display. The search results are based on the following criteria: album name, artist name, track name, key, and tempo.

• To hide the keyboard, tap the keyboard icon in the lower-right corner of the virtual keyboard. Alternatively, tap anywhere on the screen other than the keyboard or the Search field.

• To filter your tracks, tap Genre, Album, Artist, Key, or BPM, and then tap one of the available options. Only tracks tagged with that genre, album, artist, key, or BPM will be shown. (By default, the key is notated using the Camelot system.)
  Note: You can also use the Preferences to set whether you want to show tracks with the same key only or tracks with compatible keys as well as the “tolerance” of BPM filter (to include tracks with tempos within 1–15 BPM of the selection). See Configuration > Preferences to learn more.

• To sort the list of results, tap the Sort By icon in the upper-right corner, and then tap one of the available options. Tap the arrow icon next to this to toggle between ascending and descending order.

Playback & Cueing

• To play or pause a track, press Play/Pause (/).
• To scratch a track, move the platter when the Motor is set to On and audio is playing.
• To set the initial cue point, press Shift+Cue at the desired location during playback.
• To return to the initial cue point and stop, press Cue. The button will flash while the unit is paused at the cue point. To return to the initial cue point and keep playing, press Shift+Play/Pause (/).
• To reverse playback, press Shift+Censor/Reverse. The button will flash while playback is reversed.
• To return to normal playback, press Censor/Reverse.
• To censor playback, press and hold Censor.
• To return to normal playback, release Censor. Normal playback will resume from where it would have been if you had never engaged the Censor feature (i.e., as if the track had been playing forward the whole time).
• To skip to the previous or next track, press one of the Track Skip / buttons.
• To return to the beginning of a track, press Track Skip  in the middle of a paused track.
• To scan quickly through the track, press and hold Shift and then press one of the Beat Jump buttons.
• To enable or disable Slip Mode, press Slip. In Slip Mode, you can jump to cue points, use the platters, or pause the track while the track’s timeline continues (the lower half of the waveform in the touchscreen will continue moving forward). When you stop whatever action you are performing, the track will resume normal playback from where it would have been if you had never done anything (i.e., as if the track had been playing forward the whole time).

To jump to a specific location in the track:

• If Needle Lock is disabled: tap the desired location in the track overview.
• If Needle Lock is enabled: pause playback and then tap the desired location in the track overview. Alternatively, make sure the motor is on, then stop the platter with your hand or palm to swipe through the track overview.

See Configuration > Preferences to learn about Needle Lock.
To zoom in and out of the waveform, place two fingers on the display and spread them apart or pinch them together. Alternatively, turn the Select/Load knob.

Looping & Beat-Jumping

• To create and activate an auto loop, press the Auto Loop knob.
• To set the auto loop length, turn the Auto Loop knob to select the number of beats: 1/32, 1/16, 1/8, 1/4, 1/2, 1, 2, 4, 8, 16, 32, or 64.
• To create and activate a manual loop, press Loop In to set the start point, and then press Loop Out to set the end point. The loop will be activated immediately, and the loop will be indicated as a shaded area in the waveform and track overview.
• To deactivate a loop, press the Auto Loop knob.
• To move the loop, press and hold Shift and turn the Auto Loop knob while the loop is activated.
• To double or halve the length of a loop, turn the Auto Loop knob while the loop is activated.
• To manually edit the beginning or end of a loop, press Loop In or Loop Out, respectively, and then move the platter left or right to shorten or extend the loop region. Commit the edit by pressing Loop In or Loop Out again.
• To beat-jump through a track, press one of the Beat Jump buttons. Each press will skip through the track by the length of an auto loop, which you can set by turning the Auto Loop knob.

Syncing & Pitch Adjustment

To activate sync, press Sync on the unit that you want to control the BPM, which becomes the “master.” After Sync is activated on that unit, press Sync on any additional units. The tempo of each unit will immediately synchronize to match the tempo of the master unit.
The Sync state icon in the display will indicate the current status:

• Sync Off: Sync is deactivated.
• Tempo Sync: Only the tempo is synced (the BPM will match that of the master unit).
• Bar/Beat Sync: The tempo will be synced, and the track will be automatically bar- or beat-matched with the track on the master unit, depending on the Sync Mode setting.

To deactivate sync on an SC5000M PRIME unit, press Sync again, or press Shift+Sync, depending on the setting of Sync Button Action in the Preferences.

To set a different SC5000M PRIME unit as the master, press Master. All connected SC5000M PRIME units with Sync activated will use the tempo of this unit.
To adjust the track’s pitch, move the pitch fader. You can do this only when the deck is not synced.

Important: If Sync is activated, moving the pitch fader on the “master” SC5000M PRIME unit will change the speed of all synced units, while moving the pitch fader on other units will do nothing.
To adjust the track’s pitch momentarily, press and hold one of the Pitch Bend –/+ buttons.
To adjust the range of the pitch fader, press and hold Shift and press one of the Pitch Bend –/+ buttons to select +4%, 8%, 10%, 20%, 50%, or 100%.
To reset the track’s pitch to 0%, press Shift+Key Lock/Pitch Reset. The track’s pitch will return to its original pitch (0%) regardless of the position of the pitch fader.
To adjust the track’s key, tap the key on the touchscreen to open the Key Change Menu.

Pad Modes

The 8 pads have different functions in each pad mode. The Parameter / buttons will make adjustments specific to each pad mode.
To enter each pad mode, press the corresponding button: Hot Cue, Loop, Roll, or Slicer.

Hot Cue Mode

In Hot Cue Mode, you can use each pad to jump to an assigned hot cue point.
Tip: You can use the Engine PRIME software to set, name, and assign colors to your hot cue points. The names and colors will appear in the display for reference.
To assign a hot cue to a pad, press an unlit pad at the desired location in the track. The pad will light up when a hot cue point
is assigned.
To jump to a hot cue point, press the corresponding pad.
To clear a hot cue from a pad, press Shift and the desired pad. The pad will turn off when there is no hot cue point assigned to it.

Loop Modes

In Manual Loop Mode, you can use each pad to activate an assigned loop. Pressing Loop for the first time will always enter Manual Loop Mode.
Tip: You can use the Engine PRIME software to set and name your loops. The names will appear in the display for reference.

To assign a loop to a pad and activate it, press an unlit pad to create a Loop In point at the current location, and then press it again to create the Loop Out point at another location. You can also assign an auto loop to a pad by pressing an unlit pad while in the auto loop. The loop will activate immediately, and the pad will light up.
To activate a loop, press the corresponding pad. Once a loop has been created, you can retrigger it by pressing the corresponding pad again, depending on the Saved Loop Behavior setting.
To delete a loop, press Shift and the desired pad.

In Auto Loop Mode, you can use each pad to create and activate an auto loop. Pressing Loop while in Manual Loop Mode will enter Auto Loop Mode.

To activate an auto loop, press a pad. The display will show the length of the auto loop for each pad. To deactivate an auto loop, press the pad again.

Roll Mode

In Roll Mode, you can press and hold each pad to trigger a “loop roll” of a certain length while the track’s timeline continues (the lower half of the waveform in the display will continue moving forward). When you release the pad, the track will resume normal playback from where it would have been if you had never done anything (i.e., as if the track had been playing forward the whole time).
To trigger a roll, press the corresponding pad. Pads with triplet-based loop rolls are indicated are lit purple.

Slicer Mode

In Slicer Mode, the eight pads represent eight sequential beats—“slices”—in the beatgrid. When you press Slicer, you automatically activate an eight-beat loop. The currently playing slice is represented by the currently lit pad; the light will “move through the pads” as it progresses through the eight-slice phrase. You can press a pad to play that slice. When you release the pad, the track will resume normal playback from where it would have been if you had never pressed it (i.e., as if the track had been playing forward the whole time).
To play a slice, press the corresponding pad. Use the parameter buttons to change the length of the repeats.
In Slicer Loop Mode (second press), the eight pads represent eight sequential beats—“slices”—in the beatgrid. The currently playing slice is represented by the currently lit pad; the light will “move through the pads” as it progresses through the eight-slice phrase, which will loop (this is the difference between this mode and Slicer Mode). You can press a pad to play that slice. When you release the pad, the track will resume normal playback from where it would have been in the loop if you had never pressed it (i.e., as if the track had been playing forward the whole time).

Configuration

Important: All items in the Shortcuts screen are also in the Preferences. If you change a setting in one screen, it will also change it in the other.
Shortcuts
To open the Shortcuts screen, press Shortcuts.
To close the Shortcuts screen, tap the X in the upper-right corner.
In the Shortcuts screen, tap an option to select it:

• Layer Color: This setting determines the color of the light ring around the platter for each layer. Tap A or B in the center to select the layer, and then tap a color to select it. The light ring will change color immediately. Tap the X to return to the previous screen.

• Cue/Loop Quantization: This setting determines the degree of quantization for time-based features. Select 1/8 beat, 1/4 beat, 1/2 beat, 1 beat, or 4 beats.

• Sync Mode: This setting determines the degree of synchronization applied when you press the Sync button on SC5000M PRIME:
  o Bar: The tempo will be synced, and the track will be automatically bar- matched with the track on the master unit (the downbeats of each bar will be aligned).
  o Beat: The tempo will be synced, and the track will be automatically be beat- matched with the track on the master unit.
  o Tempo: Only the tempo will be synced (the BPM will match that of the master deck).

• Screen Brightness: This setting determines the brightness of the touchscreen: Low, Mid, High, or Max.

• Player #: This setting determines the number of this player. When selecting a source device to browse, this number is shown next to the device name in the display.

Preferences

To open the Preferences screen, press and hold View/Preferences/Utility and then tap the Preferences tab. To close the Preferences screen, tap the X in the upper-right corner.
In the Preferences screen, swipe up or down to scroll through the options, and tap an option to select it:
Playback

• Motorized Platter Start: This setting will determine how quickly your track starts to play. When set to Normal, the track will play in relation to the motor start-up speed. When set to Instant, the song will begin playing immediately, and the motor and platter will catch up to the song within a few milliseconds.

• Track Start Position: This setting determines where the beginning of a track is after it loads. Select the actual start of the file (Track Start) or the automatically detected beginning of an audio signal (Cue Position).

• Default Speed Range: This setting determines the range of the pitch fader. Select +4%, 8%, 10%, 20%, or 50%.

• Sync Mode: This setting determines the degree of synchronization applied when you press the Sync button on SC5000M PRIME:
  o Bar: The tempo will be synced, and the track will be automatically bar- matched with the track on the master unit (the downbeats of each bar will be aligned).
  o Beat: The tempo will be synced, and the track will be automatically be beat- matched with the track on the master unit.
  o Tempo: Only the tempo will be synced (the BPM will match that of the master deck).

• Sync Button Action: This setting determines how the Sync button will act when pressed.
  o Toggle: This mode allows you to toggle sync on and off without having to hold Shift.
  o Shift Disable: This mode requires Shift to be held in order to turn off sync.

• Pitch Control Type: This setting determines the primary function of the Pitch Bend buttons. Select Pitch Bend to keep the primary function as momentarily reducing or increasing the pitch, or select Range to set the primary function to adjusting the range of the pitch fader. The function not used as the primary will still be available by holding Shift and using the Pitch Bend buttons.

Cues/Loops

• Cue/Loop Quantization: This setting determines the degree of quantization for time-based features: hot cue points, loops, and loop rolls. Select 1/8 beat, 1/4 beat, 1/2 beat, 1 beat, or 4 beats.
• Paused Hot Cue Behavior: This setting determines how pads will play their hot cue points. When set to Momentary, playback will start from a hot cue point when you press and hold its pad—release the pad to return to the hot cue point. When set to Trigger, playback will start from a hot cue point (and continue) when you press and release its pad.
• Default Loop Size: This setting determines the default size of an auto loop when you load a new track to the deck: 1, 2, 4, 8, or 16 beats.
• Smart Loops: This setting determines whether or not a manual loop will be automatically expanded or reduced to a conventional length (e.g., 2 beats, 4 beats, 8 beats, etc.) when you set it. Select On or Off. This setting works independently of the quantization setting.
• Move Cue To Loop In: This setting determines whether the song’s initial Cue Point will automatically be moved to the start of a loop (On), or remain at its current point (Off).
• Saved Loop Behavior: This setting determines the action of loops after they have been saved. When set to Reloop, pressing a pad with a saved loop will start playing the loop again. When set to Disable, pressing a pad with a saved loop will turn off the loop.

Display

• Track Title: This setting determines if you will view tracks by their file names instead of by their metadata (tags). Select On or Off.
• Time Format: This setting determines whether or not pitch adjustment affects how the track time is displayed. When set to Static, the track’s time corresponds to locations in the track as usual; adjusting the pitch does not affect it. When set to Dynamic, the track’s time will automatically adjust to account for changes in pitch. For instance, if you set the pitch fader to -8%, the track time will increase so it is 8%longer.
• Track End Warning: This setting determines how long before the end of a track SC5000M will warn you that it is nearing the end. If the track is on the currently selected layer, the platter ring and track overview will flash. If the track is on the opposite layer, the Layer button will flash.
• On Air Mode: This setting changes the platter ring illumination when the channel fader on the Denon DJ mixer is up or down, indicating an active or “on air” deck. When this setting is On, raising the channel fader will change the platter color from white to the selected color. When this setting is Off, the user-selected color will always be shown regardless of the channel fader position.
  Note: This requires a connection to a compatible Denon DJ mixer via Ethernet.

Safety

• Lock Playing Deck: This setting determines whether or not you will be able to load a track to the deck as it is playing. Select On or Off. When this setting is on, the deck must be paused in order to load a track to it.
• Needle Lock: This setting determines whether or not you can tap the track overview in the display to jump to that location in the track during playback. Select On or Off. You can use the track overview while playback is stopped regardless of this setting. Alternatively, if Needle Lock is On and Motor is On, stopping the platter with your hand or palm will allow you to swipe through the track overview.
• Pad Lock: This setting determines whether the pads and pad mode buttons (Hot Cue, Loop, Roll, Slicer) are enabled or disabled. Select On or Off.

Library

• Key Notation: This setting determines how the track key is notated in the display. You can view the key as all Sharps, all Flats, Open Key, or Camelot.
• Key Filter: This setting determines whether the Key filter shows tracks with the same key only (Match) or tracks with compatible keys (Compatible).
• BPM Range: This setting determines the lowest- and highest-possible BPM values that will be used when tracks are analyzed: 58–115, 68–135, 78–155, 88–175, or 98–195 BPM.
• BPM Filter Tolerance: This setting determines the “tolerance” of the BPM filter so you can include tracks with tempos that are within a small range of the selected tempo. Select +0, 1, 2, 3, 5, 10, or 15.
• Collection Browse Behavior: This setting determines browsing behavior when using the Library. When set to Select, tapping a playlist, crate or folder will select it, and a double-tap is required to open it. When set to Open, tapping a playlist, crate or folder will open it.

Deck Colors

Deck Layer Colors: These settings determine the colors of the light ring around the platter for each layer on each player. Tap the arrow next to A or B to select the layer, and then tap a color to select it. The light ring will change color immediately. Tap the X to return to the previous screen.

Utility

To open the Utility screen, press and hold View/Preferences/Utility and then tap the Utility tab. To close the Utility screen, tap the X in the upper-right corner.
In the Utility screen, swipe up or down to scroll through the options, and tap an option to select it.

Device Settings

• Player #: This setting determines the number of this player. When selecting a source device to browse, this number is shown next to the device name in the display.
• Layer B: This determines whether this SC5000M PRIME will use both deck layers (On) or just one (Off).
• Wi-Fi: This setting determines whether Wi-Fi is enabled (On) or disabled (Off).
• Wi-Fi Settings: Use this option to open the Wi-Fi connection menu and connect to a wireless network.
• Track Preview: When active, Track Preview will reveal a play button for each song in the library, allowing the songs to be auditioned in the cue without loading a song to the deck. Select On or Off.
• Screen Brightness: This setting determines the brightness of the touchscreen: Low, Mid, High, or Max.

Streaming Services
Use these options to enable or disable connections to streaming service partners. When set to On, the selected service will be available under the Source selection.
Cloud Services
Use this option to retrieve your Engine library database from a cloud storage service. You must first use the Engine PRIME software to sync your database. Then, when this option is set to On, the selected service will be available under the Source selection and you can access these files over an established internet connection.
Note: We recommend using only high-quality, name brand USB 3.0 or Class U1 or U3 SD cards as source drives, especially when cloud services are enabled.

Device Info

• Model: This is the product name.
• Firmware Version: This is the current version of the unit’s Engine PRIME operating system.
• SC5000M Controller: This is the current version of the unit’s controller firmware.
• Reset all settings to default: Press Reset to restore the default factory settings for your device.

Update

Update Firmware: Use this option to restart SC5000M PRIME in Update Mode, which enables you to update its firmware.
Follow the firmware update instructions included with the firmware update package you downloaded.

Legal Info

Legal Info: Use this option to view the Denon DJ EULA and patent list.

References

• Professional DJ Equipment | Denon DJ | Embrace The Future
• Software downloads, manuals and documentation - Denon DJ
• Legal
• denondj.com/support

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>