OBDLink MX+ User Guide

OBDLink MX+ User Guide

1. Get the OBDLink app

visit www.obdlink.com/apps or scan the QR code

2. Plug MX+ into the OBD port

3. Turn the ignition to the “Key On, Engine Off” position

4. Push the “Pair” button and select OBDLink MX+ in Bluetooth settings

5. Tap “Connect” in the OBDLink app

Enhanced OEM Add-Ons

Tap the “Vehicle Editor” icon in the app or visit www.obdlink.com/oem to see if your vehicle is eligible for free OEM upgrades

Troubleshooting

Unable to pair: Press the “Pair” button (step 4) and make sure the Bluetooth LED is blinking fast. If problems persist, disconnect phone from all other Bluetooth devices

Unable to connect to vehicle: Make sure the ignition is in the “On” position OBDLink device not appearing in phone’s

Bluetooth device list: Perform a factory reset by pressing & holding the “Pair” button for 15+ seconds (power LED will flash rapidly). Proceed to step 4

Firmware update failed:

• Open the OBDLink app
• Tap “Settings” then “Firmware Updates”
• Tap “Menu” (“…” on some devices)
•  Select “Firmware Recovery”, tap “Yes”
• Make sure your OBDLink device is selected and tap “Update Firmware”
• Tap the green “Update Firmware” button

You may get a pop-up saying “OBDLink Device Not Found”, this is normal if there are no OBDLink devices registered. Tap “OK”

Regulatory Compliance

OBD Solutions, LLC hereby confirms that the product branded “OBDLink MX+” complies with:

• Reach EC No 1907/2006
• ROHS Directive 2011/65/EU
• EU Radio Equipment Directive (2014/53/EU)
• EU Electromagnetic Compatibility (2014/30/EU)
• Frequency spectrum Min: 2400 MHz Max: 2483.5 MHz
• Radio Transmission Max Output Power: +6dBm
• CE Conformity date of issue: September 16, 2018

OBDLink MX+ Getting Started

Read More About This Manual & Download PDF:

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>