OBDLink LX OBD2 Bluetooth Scanner Quick Start Guide
- October 30, 2023
- OBDLink
Table of Contents
OBDLink LX OBD2 Bluetooth Scanner
How To Install
Download & install OBDLink app
Scan the QR code or visit the URL from your Android device to download the
OBDLink app:
Plug LX Bluetooth into the diagnostic link connector (DLC)
The DLC is usually found on the driver’s side, under the dash.
Turn the ignition to Key On, Engine Off position
The ‘POWER’ LED will turn ON, and the ‘BT’ LED will start flashing slowly.
- – LEDs are off? Check the vehicle for blown fuses.
Open ‘The settings’ app, and enable ‘Bluetooth’
Tap ‘Bluetooth – Pair with a device’
Press the ‘Connect’ button on LX
The ‘BT’ LED will switch to a fast blink.
Attention!
You must complete steps 7, 8, and 9 within 2 minutes. If you need more time,
press the button again.
Wait for OBDLink LX to appear on the ‘Available devices’ list
Tap ‘Scan’ if OBDLink LX does not show in ‘Available devices’.
-
Tap ‘OBDLink LX’ to pair the device
-
Tap ‘OK’ in the ‘Bluetooth pairing request’ dialog
LX will now appear as ‘Paired’:
- Launch the OBDLink app, and tap Connect
Choose ‘Bluetooth’
Choose ‘OBDLink LX’
Once the app establishes a connection with LX, the ‘BT’ LED will turn on solid. Tap ‘Diagnostics’ to start a scan.
-
Need help? Go to obdlink.com/support or scan the QR code
-
For advanced configurations, go to obdlink.com/setup or scan the QR code
Thank you for your purchase!
If you like OBDLink LX Bluetooth, please post your review on amazon.com.
Frequently Asked Questions
What is the OBDLink LX OBD2 Bluetooth Scanner?
The OBDLink LX OBD2 Bluetooth Scanner is a device that connects to your car's diagnostic link connector (DLC) and sends information about your car's performance to your Android device via Bluetooth.
How do I install the OBDLink LX OBD2 Bluetooth Scanner?
To install the OBDLink LX OBD2 Bluetooth Scanner, download and install the OBDLink app, plug the LX Bluetooth into the DLC, turn the ignition to Key On, Engine Off position, enable Bluetooth on your Android device, connect the LX to your device, and launch the OBDLink app.
Where is the DLC located in my car?
The DLC is usually located on the driver's side, under the dash.
What should I do if the LEDs on the OBDLink LX OBD2 Bluetooth Scanner are off?
If the LEDs on the OBDLink LX OBD2 Bluetooth Scanner are off, check your vehicle for blown fuses.
What should I do if the OBDLink LX does not appear in the 'Available devices' list?
If the OBDLink LX does not appear in the 'Available devices' list, tap 'Scan' to search for it.
How long do I have to complete steps 7, 8, and 9 during the installation process?
You must complete steps 7, 8, and 9 within 2 minutes. If you need more time, press the button again.
Where can I go for help with my OBDLink LX OBD2 Bluetooth Scanner?
For help with your OBDLink LX OBD2 Bluetooth Scanner, go to obdlink.com/support or scan the QR code provided in the user manual.
Where can I find advanced configurations for my OBDLink LX OBD2 Bluetooth Scanner?
For advanced configurations for your OBDLink LX OBD2 Bluetooth Scanner, go to obdlink.com/setup or scan the QR code provided in the user manual.
How do I start a scan with my OBDLink LX OBD2 Bluetooth Scanner?
To start a scan with your OBDLink LX OBD2 Bluetooth Scanner, launch the OBDLink app, tap 'Connect', choose 'Bluetooth', choose 'OBDLink LX', and tap 'Diagnostics'.
Download PDF Link:
OBDLink-LX-OBD2-Bluetooth-Scanner-
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>