motif Clean-Z O3 CPAP Sanitizer User Guide
- June 6, 2024
- motif
Table of Contents
Clean-Z Quick Guide | Assemble Unit
Clean PAP Mask and Tubing
Insert the filter into the bag and connect the mask to the tubing. Place the
mask into the bag. Close the bag around the tubing using the velcro. Attach
the Clean-Z to the end of the tubing. The connector adapter might be needed
based on your PAP equipment.
Start Cleaning Process
Connect the power supply to the Clean-Z and plug into an electrical outlet.
Press the power button. The Clean-Z will start and automatically run through a
complete cleaning cycle.
Stages
Prep Stage: The device will beep and display a slow flashing red light.
Cleaning Stage: The sequenced red light indicates ozone is being
produced, sanitizing your device.
Fresh Air Stage: The device will now purge ozone from the PAP and show a
sequence of green lights.
Complete: The sanitization is now complete. The device will beep and then
show three solid green lights.
Indications of Use
The Clean-Z is designed to sanitize an individual’s Positive Airway Pressure (PAP) mask. Individuals who use a PAP machine for Obstructive Sleep Apnea (OSA) can use the Clean-Z to sanitize on a daily basis or when the user wants the added benefit of thorough sanitization.
See manual for a full list of warnings
Warning: Only use in a well-ventilated room. Allow the device to complete
all cycles.
Warning: Keep away from all water sources. Keep away from flame or fire.
Warning: Keep away from children. Warning: Do not disassemble or
dismantle the Clean-Z device.
Warning: Do not run the Clean-Z for more than two consecutive cycles.
Warning: Do not use the Clean-Z while your PAP machine is in use. The
Clean-Z is not a PAP machine.
For more information visit:
www.motifclean-z.com
Manufactured for:
Motif Medical LLC Dover, DE 19901
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>