strymon 261032 Lex Rotary Rotating Speaker Effect Pedal User Manual

: June 6, 2024
: strymon

Table of Contents

Front Panel
Secondary Functions
Rear Panel
Power up settings
Factory settings
Sample Settings
Features
Specifications
Power Supply
Warranty
Read User Manual Online (PDF format)
Download This Manual (PDF format)

strymon 261032 Lex Rotary Rotating Speaker Effect Pedal User Manual

Front Panel

Secondary Functions

Rear Panel

Power up settings

Factory settings

Secondary functions: Cab direction set to REAR. All other secondary functions set to 50% EXP input jack: Assigned to use an expression pedal and vary the SPEED from BRAKE to FAST

BI-AMP MODE: OFF
EXP INPUT ASSIGN: Assigned to use an expression pedal
CAB FILTER: Assigned to GUITAR AMP mode

Sample Settings

Mellowed Out
Fat Harmonics
Maximum Drive
Distant Miking
Rotary Brake
Classic Ballad
Swirly Horn
Slow Overdrive

Features

Hand crafted rotary algorithms for meticulous and nuanced recreations of rotary speaker systems
Ultra Low Noise, high performance A/D and D/A Converters
Premium analog front end and output section
High Performance DSP
Selectable cabinet orientation (front or rear facing)
Fast and slow rotary speeds with independent horn and drum acceleration times
Bi-amp output capability
Stereo Output
Expression pedal input with selectable control over any knob parameter
Compatible with Favorite switch to save your favorite sound
Remote switching of SLOW / FAST speeds with Favorite switch
+/- 6dB level control
SLOW / FAST footswitch with BRAKE feature
Rugged & Lightweight Anodized Aluminum Chassis
No-Nonsense User Interface
True Bypass (electromechanical relay switching)

Specifications

Input Impedance: 1Meg Ohm
Output Impedance: 100 Ohm
Signal to Noise: 110 dB
A/D & D/A: 24-bit 96kHz
Frequency Response: 20Hz to 20kHz
Max Input Level: +8dBu
DSP performance: 1596 MegaFLOPS
Bypass Switching: True Bypass (electromechanical relay switching)
Dimensions: 4.5” deep x 4” wide x 1.75” tall

Power Supply

Input Voltage: 9VDC Center Negative
Required Current: 250mA

Warranty

Strymon Non-Transferrable Limited Warranty

Warranty
Strymon warrants the product to be free from defects in material and workmanship for a period of one (1) year from the original date of purchase. If the product fails within the warranty period, Strymon will repair or, at our discretion, replace the product at no cost to the original purchaser.

Exclusions
This warranty covers defects in manufacturing discovered while using this product as recommended by Strymon. This warranty does not cover loss or theft, nor does the coverage extend to damage caused by misuse, abuse, unauthorized modification, improper storage, lightning, or natural disasters.

Limits of Liability
In the case of malfunction, the purchaser’s sole recourse shall be repair or replacement, as described in the preceding paragraphs. Strymon will not be held liable to any party for damages that result from the failure
of this product. Damages excluded include, but are not limited to, the following: lost profits, lost savings, damage to other equipment, and incidental or consequential damages arising from the use, or inability to use this product. In no event will Strymon be liable for more than the amount of the purchase price, not to exceed the current retail price of the product. Strymon disclaims any other warranties, express or implied. By using the product, the user accepts all terms herein.

How to Obtain Service Under this Warranty
For North American customers: Contact Strymon through our website at http://www.strymon.net/support for Return Authorization and information. Proof of original ownership may be required in the form of a purchase receipt.

For International Customers: Contact the Strymon dealer from which the product was purchased from in order to arrange warranty repair service.

Strymon® is a division of Damage Control®, LLC.