ESTES 7310 Advanced Level Model Rocket Kit Instruction Manual
- June 6, 2024
- ESTES
Table of Contents
ANTAR™
7310
MODEL ROCKET INSTRUCTIONS
KEEP FOR FUTURE REFERENCE
IMPORTANT: Please record the date found on the decal and keep it for future
reference. __
Read all instructions. Make sure you have all parts and supplies. Test fit all
parts before applying glue.
SUPPLIES
PREPARE WOOD PARTS
COUNTDOWN AND LAUNCH
NOTE:
Estimated weight: 3.7 oz. (104.9 g)
*ESTES LAUNCH SUPPLIES NEEDED**
(Sold Separately)
- LaunchPad
- Launch Controller
- Recovery Wadding
- Starters (with engines)
- Rugs (with engines)
- Estes® Engines: B6-2, B6-4, C6-5
PRECAUTIONS
NAR SAFETY CODE
NO DRY GRASS OR WEEDS
PRE-LAUNCH CHECK For safety, never launch a damaged rocket. Check the
rocket’s body, nose cone, and fins. Also, check the engine mount, recovery
system, and launch lug(s). Repair any damage before launching the rocket.
FLYING YOUR ROCKET Choose a large field (500 ft. [152 m] square) free of
dry weeds and brown grass. The larger the launch area, the better your chance
of recovering your rocket. Football fields and playgrounds are great. Launch
only with little or no wind and good visibility. Always follow the National
Association of Rocketry SAFETY CODE (enclosed).
MISFIRES TAKE THE KEY OUT OF THE CONTROLLER. WAIT ONE MINUTE BEFORE GOING
NEAR THE ROCKET. Disconnect the micro-clips and remove the engine. Take the
plug and starter out of the engine. A burned starter means the starter tip was
not touching the engine propellant. Install a new starter; be sure the tip is
touching propellant inside the engine. Push the plug in place. Repeat steps
under Countdown and Launch
©2020 Estes Industries, LLC • All Rights Reserved
Estes Industries, LLC • 1295 H Street • Penrose, CO 81240-9698 • Made in
Guangdong, China
PN 090004-7310 (12-20)
Documents / Resources
|
ESTES 7310 Advanced Level Model Rocket
Kit
[pdf] Instruction Manual
7310, Advanced Level Model Rocket Kit
---|---