ESTES 2206 NASA SLS Rocket Instructions
- June 6, 2024
- ESTES
Table of Contents
1:200 Scale
NASA SLS 2206
EADY TO FLY MODEL ROCKET INSTUCTIONS
KEEP FOR FUTURE REFERENCE
IMPORTANT: Please record date found on box near arcode, and keep for future
reference.
PREAPARE RECOVERY SYSTEM
PREPARE FLIGHT RECOVERY
NOTE:
Recovery wadding and parachute must slide easily into body tube. If too light,
redo.
PREPARE ENGINE
WARNING: FLAMMABLE
To avoid serious injury, read instructions & NAR Safety Code included with
engines. PREPARE YOUR ENGINE ONLY WHEN YOU ARE OUTSIDE AT THE LAUNCH
SITE PREPARING TO LAUNCH. If you do not use your prepared engine, remove the
starter before storing your engine.
PREPARE FOR FLIGHT
IMPORTANT!
Fins must be used when launching rocket.
COUNTDOWN AND LAUCNH
NOTE:
Key always out until final countdown!
ESTES LAUNCH SUPPLIES NEEDED (Sold Separately)
- Launch Pad
- Launch Controller
- Recovery Wadding
- Starters (with engines)
- Plugs (with engines)
- Estes® Engines: C5-3, C6-3
PRECAUTIONS
PRE-LAUNCH CHECK For safety, never launch a damaged rocket. Check the
rocket’s body, nose cone and fins. Also, check the engine mount, recovery
system and launch lug(s).
Repair any damage before launching the rocket.
FLYING YOUR ROCKET Choose a large field (500 ft. [152 m] square) free of
dry weeds and brown grass. The larger the launch area, the better your chance
of recovering your rocket. Football fields and playgrounds are great. Launch
only with little or no wind and good visibility. Always follow the National
Association of Rocketry (NAR) SAFETY CODE.
MISFIRES TAKE THE KEY OUT OF THE CONTROLLER. WAIT ONE MINUTE BEFORE GOING
NEAR THE ROCKET! Disconnect the micro-clips from the starter. Remove the
engine from the rocket. Remove the plug and starter from the engine. If the
starter is bumed, it was not inserted correctly; it must touch the propellant
inside the engine. Insert a new starter all the way inside the engine without
bending it. Then insert the plug to hold the starter firmly in place. Repeat
the steps under COUNTDOWN AND LAUNCH.
© 2020 Estes Industries, LLC • All Rights Reserved • Estes Industries, LLC • 295 H Street • Penrose, CO 81240-9698 • Made in: Guangdong, China PN 090004-2206 (10-20)
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>