BEA Wizard Mounting Bracket User Guide
- June 6, 2024
- BEA
Table of Contents
BEA Wizard Mounting Bracket
Description
The Wizard Mounting Bracket (10WMB) is for use with the BEA Wizard and the IRIS sensor. The bracket is used for applications where the sensor may not be mounted to a typical header location.
Installation
Dimenstion are shown below in inches. Use enclosed hardware for mounting.
Company Contact
Do not leave problems unresolved. If a satisfactory solution cannot be
achieved after troubleshooting
a problem, please call BEA, Inc. If you must wait for the following workday to
call BEA, leave the door inoperable until satisfactory repairs can be made.
Never sacrifi ce the safe operation of the automatic door or gate for an
incomplete solution.
The following numbers can be called 24 hours a day, 7 days a week. For more
information, visit www.beasensors.com.
- US and Canada: 1-866-249-7937
- Canada: 1-866-836-1863
- Northeast: 1-866-836-1863
- Southeast: 1-800-407-4545
- Midwest: 1-888-308-8843
- West: 1-888-419-2564
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>