8BitDo Pro 2 Wired Controller 6922621501855 for Xbox Instruction Manual
- June 6, 2024
- 8Bitdo
Table of Contents
Pro 2 Wired Controller for Xbox – instruction manual
connectivity
Xbox One / Xbox Series X / Xbox Series S
- Connect the controller to your Xbox One and Xbox Series X/S via its USB cable. Status LED is on when the controller is successfully connected
Windows10
- Connect the controller to your Windows device via its USB cable. Status LED is on when the controller is successfully connected
- Required system: Windows 10 or above
button swap
- press and hold any two of the A/B/X/Y/LB/RB/LSB/RSB buttons you would like to swap
- Press the start button to swap them, profile LED blinks to indicate the success of the action
- press and hold any of the two buttons which have been swapped and press the start button to cancel it
- button mapping goes back to its default mode when the controller is turned off
- please visit support.8bitdo.com for further information and assistance
volume control
- 1 Press and hold profile + up/down to turn up/down in-game volume
- 2 Press and hold profile + left/right to adjust the balance between voice chat and game volume
8BitDo Ultimate Software
button mapping, thumbstick sensitivity adjustment & trigger sensitivity
alteration press the profile button to activate/deactivate the customization.
LED turns on to indicate the activation
- e.g. set P1/P2 buttons as L3/R3 and more
- available on Xbox/Windows10/Android/i0S
- please visit Microsoft Store, App Store, Google Play, or support.8bitdo.com to download the software
support
- please visit support.8bitdo.com for further information & additional support
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>