ELECHOMES Air Purifier OX300 User Manual

: June 6, 2024
: ELECHOMES

Table of Contents

Safety Precautions
Product Illustration
Instructions before use
Instructions for use
Maintenance
Troubleshooting
Product Parameters
- Composite Filter
Customer Support
Read User Manual Online (PDF format)
Download This Manual (PDF format)

ELECHOMES Air Purifier OX300

THANK YOU FOR PURCHASING THE Air Purifier BY ELECHOMES
Should you have any questions or concerns about your new product, feel free to contact us via support@elechomes.com. We hope you enjoy your new product!

Safety Precautions

Please follow the precautions below. Failure to do so may result in personal injury or damage to the product. Improper use will invalidate the warranty.

Untangle the power cord before use.
Do not let children operate the device unsupervised.
Do not use the air purifier if the power cord is damaged. Contact a qualified service center for repairs.
Do not yank the power cord or use it to pull the air purifier.
Do not use the device in a damp or dusty environment.
Do not place the device close to heat sources, furniture, curtains, aerosols, etc. This may cause a fire hazard.
This product is for indoor, domestic use only.
Do not cover the air inlet or outlet.
Do not touch the device with wet hands.
Do not let moisture into the interior of the device.
Do not place anything on top of the device.
Do not insert foreign objects into the device.
Only place the device on a sturdy, level surface.
Do not tilt the device.
Unplug the device before cleaning and assembly.
Unplug the device if it will not be used for a long period of time.

Product Illustration

Instructions before use

Select the room where you need to purify the air and place the purifier on a stable floor or countertop in the room.

In order to allow free circulation of air, avoid placing the purifier behind the curtains, under the window, next to the furniture or shelves, and near any obstacles. Keep at least 50 cm of free space on each side of the purifier.

Make sure to remove the filter packing bag before first use.
Please check the following details before using:

The labeled voltage of the device is consistent with your local regulations.
As a Class II appliance (with double insulation), this device can connect to a non-grounded electrical outlet.
The air inlet and outlet are completely clear.
The filter and bottom cap are correctly assembled (shown as below).
See figures 1-6 below on how to remove the filter packing and replace the filter when necessary.

Press the power button to turn off the purifier and unplug the power cord from the socket. (If you’re using the purifier for the first time, start directly from Figure 2.)

Flip the purifier upside down and lift the base directly (The base is connected by the main unit by magnets)

Remove the composite filter

Remove the plastic bag from the new filter

Mount the new filter on the air purifier

Replace the unit back onto the base

Instructions for use

Power button

Press the power button to start the purifier and all the buttons will light up in white. The default wind speed is Medium Speed (2), and the speed display will show “2” . By default, there is no preset timer and nothing will show on the timing display. The blue night light will always be on at the bottom of the pu rifler.
When the unit is on, you can press the Power button to enter standby mode. The power indicator will change to a steady red and all the other indicators will go off.

Speed button

When the device is powered on, press the speed button to adjust to your desired wind speed. When using for the first time, the default wind speed is medium (2). Press the speed button again to switch the speed to high (3); press the speed button twice to switch to the lowest speed level (l); press the speed button a third time, and the speed will return to medium (2).

Timer button

When the purifier is under normal operation, the default timing shutdown function is turned off. The indicator light of the timer button will always be on, but there will be nothing showing on the timer display.
Press the timer button, and choose between “lH, 2H, 3H, …… 12H, and Cancel Timing” . The timer display will show “l, 2, 3, ….. ,12, – -. ” For the fast setting, press and hold the timer button to get your desired timing. After the timer is set for Ss, the timer will start to count down. When the time is up, the device will shut down and enter standby mode.

Sleep button

While the unit is on, when the sleep button is pressed, the screen of the device will turn off. The wind speed will operate under sleep mode. The sleep button will be half-lit and all the other button indicator lights will go off. (In sleep mode, you can still select wind speed, set timer, adjust the lamp and operate the child lock button. After 3s, the screen of the device will go off again.}
Press the sleep button again to end the sleep mode (the wind speed will go back to the default level of medium (2} }. If you press the power button, the device will turn off.

Note:

In sleep mode, press the filter reset button and the child lock button will light up the screen without giving the prompting sound, but won’ t change the status of the device. After 3s, the screen of the device will turn off.
In sleep mode, press and hold the filter rest button for 5s. The button will flash red 3 times without making the normal prompting sound and the usage time of the filter will turn back to zero.

Lamp button

After the device is powered on, the night lamp at the bottom of the base will be on at high brightness. Press the lamp button again and the night light will turn off; press the button twice, the light will turn on at low brightness; press the button the third time for medium brightness; press the button a fourth time for high brightness. Press the button again and the cycle will repeat.

Child Lock

While the unit is on, press and hold the child lock for 3s to activate the child lock function which will make 3 “didi” sounds and its button indicator light will change to red. In child lock mode, none of the buttons are available, including the power button. When you press other buttons, the child lock icon will flash in red for 3 times without making the prompting sound, indicating the device is under child lock mode.
Press and hold the child lock for 3s-the buzzer will make the prompting sound once and then the device will end the child lock function and the child lock button will stay on in white. At this point, all the buttons can be pressed.

Filter Reset

While the unit is on, the indicator light of the filter reset button will be on in white, indicating the filter is normal.
When the filter has reached the end of its service life (approximately 2500 hours of use} and needs to be replaced, the button indicator light will turn red.
After changing the filter, press and hold the filter reset button for 5s and its indicator light will flash in red 3 times, and then turn back to white. At this time, the buzzer will make a “didi” sound 3 times and the usage time of the filter will turn back to zer

NOTE:
If you press the filter reset button, its indicator light will turn on in red without making the prompting sound but the filter restet function will not be activated

Maintenance

Composite Filter

Clean the composite filter twice a week and replace it at least every 6 months.
Do not wash the composite filter with soap.
Clean the filter with a vacuum or a small, soft brush. Be sure to keep the nozzle of the vacuum cleaner 5-l0cm away from the filter.
Brush the filter widthwise to prevent damage
The filter may absorb smells from cigarettes and cooking. If this occurs, clean the filter. If this persists, replace the filter.

Filter Replacement

Please change the filter when the indicator light glows red steadily.
Before changing, please unplug the device and let it cool for lSmin.
Take off the rear case before changing and secure the case in place after changing (please refer to the “Instructions before use” ).
After replacing the filter, press and hold the Filter Reset button for 5 seconds, then the red filter indicator will flash quickly and the purifier will beep 3 times. The filter counter will return to zero, and the filter indicator will turn off.

Cleaning & Storage

Turn off and unplug the device before cleaning.
Wipe the device with wet cloth. Do not use harsh solvents or soaps.
Dry the unit thoroughly before use.
Store the product in the original box and keep it in a dry, cool place.

Troubleshooting

Problem	Cause	Solution
The device doesn’ t work.	The device is not plugged in.	Plug the device into

a wall
The wind output is weak.| The plastic wrap on the filter has not been removed.| Remove the plastic wrap and reinstall the filter.
The inlets and outlets are blocked| Clear the blockage.
The filter is dirty.| Clean or change the filter
The air quality has not improved| The filter has not been installed.| Install the filter
Doors and windows are open| Close all doors and windows when using the device.
The inlets and outlets are blocked.| Clear the blockage.
The filter is dirty.| Clean or change the filter
The device emits a strange smell.| People smoke or cook inside the room| Ventilate the room.
| The filter is dirty.| Clean or change the filter.

If your device does not work for unknown reason, please unplug the power cable and restart the machine. If this still doesn’ t work, please contact our Elechomes customer service for support

Product Parameters

Elec homes Air Purifier

NOTE:
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Composite Filter

The Elechomes products are premium in material, craftsmanship, and service. They are effective from the date of purchase

Elechomes will replace defective products based on eligibility. Refunds are available to the original purchasers of our products within the first 30 days of purchase. This warranty extends only to personal use instead of commercial, rental, or any other uses for which the product is not intended for. Each product has no other warranties other than the already provided warranties.

This warranty is non-transferable. Elechomes is not responsible for any damages, losses or inconveniences caused by equipment’ s failure, user’ s negligence, user’ s abuse, or improper operation that does not follow the included user manual.

This warranty does not apply to the following situations:

Damage due to abuse, accident, alteration or vandalism.
Improper or inadequate maintenance.
Damage in return transit.
Unsupervised use by children under 18 years old.

Elechomes and its subsidiaries are only responsible for damages caused by the intended use or as instructed in the user manual. Some states do not allow this exclusion or limitation of incidental or consequential losses so the above disclaimer may not apply to you. This warranty gives you specific legal rights and you may also have other rights which may vary from state to state.

All expressed and implied warranties, including the warranty of merchantability, are limited to the period of the limited warranty.

Additional 6-month Warranty:
You can enjoy additional 6-month warranty. Just log onto www.elechomes.com/support/warranty and enter your order number (i.e. Amazon ) within the first 14 days of purchase to register your new product for the extended warranty

If you are unable to provide the order number for your product, please type a short note in the order number field along with the date you received your product.

Defective Products & Returns:
Should your product prove defective within the specified warranty period, please contact the Customer Support via support@elechomes.com with your invoice and order number. Once our Customer Support team has approved your request, please return the product with a copy of your invoice and order number.

Customer Support

Your satisfaction is our goal! Should you encounter any issues or have any questions about your new product, feel free to contact our Customer Support Team via support@elechomes.com.

Please have your order invoice and order number ready before contacting Customer Support.

Note:
To avoid shortening the life of your air purifier, only use genuine Elechomes filters. To purchase more filters for your air purifier, search key word Elechomes on Amazon for more information.

| |
---|---|---

**Connect us with @Elechomes

**

US Importer: Thousandshores Inc., 37707 Cherry St, Newark, CA 94560, USA
EU Importer: Thousandshores Deutschland GmbH, Bredowstraße 17, Hamburg 22113,DE
JP Address: 東京都千代田区鍛治町 1-10-6 BIZ SMART 神田 402

Website: https://www.elechomes.com
Customer Service: support@elechomes.com