Solac 3513 Vacuum Coffee Maker Instruction Manual

Solac 3513 Vacuum Coffee Maker

Product Information

Specifications

• Product Name: Siphon Brewer 3-in-1 Vacuum Coffee Maker

• Authorized Service Center: SOLAC-USA

• Service Center Contact Information:

  • Electra-Craft, Inc.
    41 Woodbine Street Bergenfield, New Jersey 07621-3513

  • Phone: (201)439-1700

  • Fax: (201)439-1701

  • Email: service@Solac-USA.com

  • Website: www.electra-craft.com

Description
The Siphon Brewer 3-in-1 Vacuum Coffee Maker is a versatile coffee machine that allows you to brew coffee, tea, and infusions. It features a plug base, a temperature-controlled blue crystal jar, a whistling boiling top, a coffee maker upper vessel made with heat-resistant materials, a permanent mesh filter, various rubber rings for sealing, a vessel lid, a siphon tube, a heating plaque with an on/off switch, a measure spoon, and a power cord.

Product Usage Instruction

How to Use Your Coffee Machine

Coffee Mode
To make coffee using the Siphon Brewer 3-in-1 Vacuum Coffee Maker:

1. Ensure that the coffee machine is clean and dry.
2. Fill the blue crystal jar with the desired amount of water according to the water measurements provided in the user manual.
3. Add the appropriate amount of ground coffee into the upper vessel’s permanent mesh filter.
4. Place the upper vessel on top of the blue crystal jar, ensuring a tight seal.
5. Turn on the coffee machine using the on/off switch.
6. Wait for the coffee to brew and transfer from the upper vessel to the jar.
7. Once the brewing process is complete, turn off the coffee machine and carefully remove the upper vessel.
8. Pour the brewed coffee from the blue crystal jar into your coffee cups and enjoy.

Double Coffee Cycle
To make a larger quantity of coffee using the double coffee cycle:

1. Follow the same steps as in the Coffee Mode, but use a larger amount of water and ground coffee.
2. After the first coffee cycle is complete, repeat the process with fresh water and ground coffee.
3. Combine the brewed coffee from both cycles in a separate container and mix well before serving.

Water Boiler Mode
The Siphon Brewer 3-in-1 Vacuum Coffee Maker can also be used as a water boiler:

1. Ensure that the coffee machine is clean and dry.
2. Fill the blue crystal jar with the desired amount of water according to the water measurements provided in the user manual.
3. Place the upper vessel on top of the blue crystal jar, ensuring a tight seal.
4. Turn on the coffee machine using the on/off switch.
5. Wait for the water to boil.
6. Once the water is boiled, turn off the coffee machine and carefully remove the upper vessel.
7. Use the hot water for various purposes such as making tea, instant soups, or other hot beverages.

Tea Mode (Infusions)
To make tea or infusions using the Siphon Brewer 3-in-1 Vacuum Coffee Maker:

1. Follow the same steps as in the Coffee Mode, but replace ground coffee with tea leaves or other desired ingredients.
2. Allow the infused tea or ingredients to brew in the upper vessel for the desired amount of time.
3. Once the infusion is complete, carefully remove the upper vessel and pour the infused liquid into your cups or containers.

Cleaning and Maintenance

How to Disassemble?
To disassemble the Siphon Brewer 3-in-1 Vacuum Coffee Maker:

1. Ensure that the coffee machine is turned off and unplugged.
2. Remove all accessories and detachable parts such as the upper vessel, rubber rings, siphon tube, and vessel lid.
3. Clean each part separately using warm soapy water and a soft cloth.
4. Rinse thoroughly with water and dry each part before reassembling.

Cleaning Procedure
Regular cleaning is essential to maintain the performance of your coffee machine:

1. Ensure that the coffee machine is turned off and unplugged.
2. Remove any remaining coffee grounds or tea residuals from the upper vessel and mesh filter.
3. Wipe the exterior of the coffee machine with a damp cloth.
4. Use a mild cleaning solution to clean the blue crystal jar and other detachable parts.
5. Rinse all parts thoroughly with water and dry them before reassembling.

Decalcification
It is recommended to decalcify your coffee machine regularly to remove mineral deposits:

1. Prepare a decalcifying solution according to the instructions provided by the manufacturer.
2. Fill the blue crystal jar with the decalcifying solution.
3. Turn on the coffee machine and allow the solution to run through the brewing process.
4. Repeat the process with clean water to rinse out any remaining decalcifying solution.
5. Ensure that all parts are rinsed thoroughly with water before using your coffee machine again.

Care and Maintenance
To ensure the longevity of your coffee machine:

1. Always unplug the coffee machine when not in use.
2. Before removing or changing any accessory, or cleaning the appliance, ensure that it is turned off and unplugged.
3. Store your coffee machine in a clean, dry place away from the reach of children or individuals with disabilities.

FAQ (Frequently Asked Questions)

Concern: I cannot turn on my coffee machine.

• Likely Cause: You forgot to turn the coffee machine on or plug it into the electrical power source.
• Solution: Always make sure to turn on the coffee machine using the on/off switch and ensure it is plugged into a functioning electrical power source.

Concern: Water does not rise from the jar to the upper vessel.

• Likely Cause: The jar is not properly placed on the heating plaque or the water level is too low.
• Solution: Remove the jar and place it again until it is correctly placed. Verify that the water level is above the minimum level specified in the user manual.

Concern: There are ground coffee or tea residuals inside the jar.

• Likely Cause: The mesh filter was not set properly or the coffee grounding is too fine.
• Solution: Always make sure that the mesh filter is well set before using your appliance. If using coffee, ensure that the coffee grounding is medium and not too fine to prevent clogging of the filter.

Concern: Coffee does not go down from the upper vessel to the jar.

• Likely Cause: Wrong grounding of the coffee or a clogged filter.
• Solution: Verify that the coffee grounding is medium and not too fine. If the filter is clogged, clean it thoroughly before using your coffee machine again.

IMPORTANT SAFEGUARDS

When using electrical appliances, basic safety precautions should always be followed including the following:

1. Read all instructions.
2. Do not touch hot surfaces. Use handles or knobs.
3. To protect against electrical hazards, do not immerse the cord, plugs, or appliance in water or other liquid.
4. Close supervision is necessary when any appliance is used by or near children. Children should be supervised to ensure that they do not play with the appliance.
5. This appliance is not intended for use by persons (including children) with reduced physical, sensory, or mental capabilities or lack of experience and knowledge unless they have been given supervision or instruction concerning the use of the appliance by a person responsible for their safety.
6. Unplug from the outlet when not in use and before cleaning. Allow to cool before putting on or taking off parts, and before cleaning the appliance.
7. Do not operate any appliance with a damaged cord or plug or after the appliance malfunctions, or has been damaged in any manner. Return the appliance to the nearest authorized service facility for examination, repair, or adjustment.
8. The use of accessory attachments not recommended by the appliance manufacturer may result in fire, electric shock, or injury to persons
9. Do not use outdoors.
10. Do not let the cord hang over the edge of the table or counter, or touch hot surfaces.
11. Do not place on or near a hot gas or electric burner, or in a heated oven.
12. Extreme caution must be used when moving an appliance containing hot liquids.
13. Always attach the plug to the appliance first, then plug the cord into the wall outlet. To disconnect, turn any control to ‘OFF’, then remove the plug from the wall outlet.
14. Do not use appliances for other than intended use.
15. Do not leave the unit unattended while in use.
16. Scalding may occur if the lid is removed during the brewing cycles, be sure that the lid or upper vessel is assembled well, See instructions regarding How to use it.

SAVE THESE INSTRUCTIONS

DESCRIPTION

1. Plug base
2. Tempebluecrystal jar
3. Whistling boiling top
4. Coffee maker upper vessel made with stritan from eastman
5. Permanent mesh filter
6. Upper vessel rubber ring
7. Siphon tube rubber ring
8. Vessel lid
9. Siphon tube
10. Heating plaque
11. On/off switch
12. Measure spoon
13. Cord

HOW TO USE YOUR COFFEE MACHINE

• Never fill the jar below the minimum level, or above the maximum level.
• The most amount of coffee that should be put inside the upper vessel is 1.76 oz. (50 g).

• Allow your coffee machine to end the coffee cycle, since it is automatic and should not be stopped. The appliance will shut off as soon as the process ends.
• Do not use the appliance to boil if the siphon tube is still set into the jar or without the lid properly closed. The appliance itself will whistle when the water starts to boil.
• The vacuum siphon coffee machine is a gourmet brewing type that can be achieved through controlled and specific time and temperature so don’t reheat your coffee on this appliance. Water used to fill up the jar should always be at room temperature. The upper vessel should be clean with hot water and a soft sponge to keep its crystal-clear appearance.
• The coffee ground must be medium size (french press type), since very slender ground may clog the mesh filter.

PERFORMANCE INSTRUCTIONS

USE AND CARE

• This appliance has a polarized plug (one blade is wider than the other). To reduce the risk of electric shock, this plug is intended to fit into a polarized outlet only one way. If the plug does not fit fully into the outlet, reverse the plug. If it still does not fit, contact a qualified electrician. Do not attempt to modify the plug in any way.
• Remember to untangle the electric cord before using your appliance every time.
• Do not use your appliance if every accessory is not correctly assembled.
• Do not use the appliance when the water level is below the minimum mark.
• Do not use the appliance if the on/off function is not working.
• Do not move or turn the appliance when in use or plugged.
• Do not fill up the jar above the maximum level of 28.16 oz. (0.8 l) when you use your coffee machine with the upper vessel to prepare coffee or tea, and 23.67 oz. (0.7 l) when you use the appliance as a water boiler. Also never exceed the maximum capacity of ground coffee which is 1.76 oz. (50 g).
• Remember always to unplug your coffee machine from the electric power source whenever is not in use, before you remove or change any accessory, and before you clean your appliance.
• Please take extreme precautions whenever you remove or manipulate your coffee machine parts, especially during or after use, since accessories might be extremely hot and may cause burn damage.
• Before every use, make sure the accessories are perfectly assembled, aligned and in perfect condition otherwise the normal operation of the appliance may be affected.
• Never leave your appliance unattended and plug it into the power source while is not in use; not only you will make your coffee machine last longer but also you will save energy.
• Remember to fill up the jar with water, assemble it completely before using it, put the ingredients, close the lid, and place the coffee machine on the heating plaque before plugging it into the power source.
• AFTER EVERY USE REMEMBER TO LET YOUR COFFEE MACHINE COOL OFF FOR AT LEAST 5 MINUTES BEFORE USING IT AGAIN.

HOW TO USE

• CAUTION: Before using your coffee machine for the first time make sure you read thoroughly this entire instructions manual and to clean your appliance according to the instructions mentioned on the cleaning part of “before using for the first time”.

COFFEE MODE

CAUTION:
Don’t turn the upper vessel handle or remove the upper vessel during the brewing cycle, scalding may occur if the upper vessel or lid is removed during the brewing cycle.

1. Fill up the jar with room-temperature drinking water above the minimum level of 16.9 oz. (0.5 L) but below the maximum level of 30.43 oz. (0.9 L).
2. Set the siphon tube inside the jar, with the circular part facing up, and line it up along with the jar gaps, turn the tube clockwise until it sets. (Fig. 1)
3. Above the jar, set the upper vessel lining its mark up with the handle’s line. Then turn the upper vessel by its handle, clockwise until both handles match. (Fig. 2).
4. Put the inside the upper vessel the mesh filter handling it with its insulating handle and make the flanges of the mesh filter align with the upper vessel gaps, finally, turn the mesh filter clockwise until it adjusts.
5. Put the ground coffee in (maximum quantity 1.76 oz. or 50 g), according to the amount of water with which you filled up the jar, and then close the lid of the upper vessel.
6. Place the appliance over the heating plaque then plug it into the power source.

CAUTION:
Don’t turn the upper vessel handle or remove the upper vessel during the brewing cycle, scalding may occur if the upper vessel or lid is removed during the brewing cycle.

ONE COFFEE CYCLE

1. Turn it on by pushing the on/off button once, a blue light will turn on.
2. Once the water reaches the perfect temperature, in about 5 minutes, the water will rise through the siphon tube up to the upper vessel. A few seconds after the water raising ends, the coffee brewer and its blue light will automatically turn off.
3. When the infusion time ends, about 1 more minute, the water will descend suddenly to the jar, this means your coffee is ready!
4. Your coffee maker will automatically complete the brewing process. This process mustn´t be interrupted, please don´t try to open or disarm your appliance until the complete cycle has finished.

DOUBLE COFFEE CYCLE

If you push twice the on/off button the coffee machine will perform two coffee cycles. You can do so whether you would like your coffee stronger, however, you must leave the two cycles to reach the end before you open or manipulate any part of your appliance.

1. Turn it on by pushing quickly the on/off button twice. The blue LED light will start flashing.
2. Once the water reaches the perfect temperature, in about 5 minutes, the water will rise through the siphon tube up to the upper vessel, when the infusion time ends, about 1 more minute, the water will descend suddenly to the jar, after that the water will rise again through the siphon tube.
3. A few seconds after the second water raising ends, the coffee brewer and its blue flashing light will automatically turn off.
4. Your coffee maker will automatically complete the brewing process. This process mustn´t be interrupted, please don´t try to open or disarm your appliance until the complete cycle has finished, that means that the coffee has already finished its second infusion process and it is completely down in the glass jar.
5. Once the coffee cycle ends (either 1 or 2) your coffee machine will turn off. Please verify that the blue light is turned off, unplug your appliance, and remove it from the heating plate held by its handle.
6. Steadily holding the jar by its handle with one hand, turn counterclockwise the upper vessel holding it by its handle with the other hand until it releases from the jar.
7. Separate the upper vessel from the jar. To remove the siphon tube use the jar lid and align the gaps of the lid with the flanges of the siphon tube (for reference, match the “POUR” line with the handle´s mark) and firmly press down to match the flanges into the gaps, then turn counter-clockwise until the siphon tube releases from the jar and raise the lid to take the tube out. DO NOT REMOVE THE SIPHON TUBE WITH YOUR BARE HANDS!
8. Rinse the siphon tube with cold water to cool off, then you can remove it from the lid.
9. Place the jar lid over the jar aligning the “UN-LOCK” line with the handle´s mark, turn the lid clockwise until the “POUR” line matches with the mark of the handle, and pour.

CAUTION!
PLACE THE LID OVER THE JAR BEFORE SERVING

WATER BOILER MODE

CAUTION:
Don’t remove the jar lid while the appliance is working or the appliance is stopped but water is still boiling, scalding may occur if the lid is removed.

1. Fill up the jar with room-temperature drinking water above the minimum level of 21.12 oz.(0.6 l) but below the maximum level of 23.67 oz. (0.7 l). Make sure the siphon tube is not set inside the jar.
2. Following the jar lid marks, set over the jar by aligning the “UNLOCK” line with the mark of the handle, then turn lightly clockwise until the “BOIL” line matches up with the center of the handle.
3. Set it up over the heating plaque, plug it into the power source, and press the on/ off button just once the blue light turns on.
4. When the water starts to boil the appliance will start to whistle, then you can turn your appliance off by pushing the on/off button once and the blue light will turn off. Unplug and re-move the jar from the heating plaque holding it by its handle. In case the water entirely evaporates the appliance will turn off automatically.
5. Carefully turn the lid clockwise until the “POUR” line matches with the center of the handle and you can see the dispenser to pour.

CAUTION! PLACE THE LID OVER THE JAR BEFORE SERVING

CAUTION:
Don’t remove the jar lid while the appliance is working or the appliance stops but water is still boiling, scalding may occur if the lid is removed.

TEA MODE (INFUSIONS)

CAUTION:
Don’t turn the upper vessel handle or remove the upper vessel during the brewing cycle, scalding may occur if the upper vessel or lid is removed during the brewing cycle.

1. Fill up the jar with room-temperature drinking water above the minimum level of 21.12 oz. (0.6 L) but below the maximum level of 28.16 oz. (0.8 L).
2. Set the siphon tube inside the jar, with the circular part facing up, and line it up along with the jar gaps, turn the tube clockwise until it sets.
3. Above the jar, set the upper vessel lining its mark up with the handle’s line. Then turn the upper vessel by its handle, clockwise until both handles match).
4. Put the inside the upper vessel the mesh filter handling it with its insulating handle and make the flanges of the mesh filter align with the upper vessel gaps, finally, turn the mesh filter clockwise until it adjusts.
5. Put your choice of infusion in (maximum quantity 1.76 oz. or 50 g), according to the amount of water with which you filled up the jar, and then close the lid of the upper vessel.
6. Place the appliance over the heating plaque then plug it into the power source and turn it on pushing the on/off button, and a blue light will turn on. If you push the on/off button the appliance will perform two infusion cycles (the blue light will start flashing). You can do so whether you would like your infusion stronger, however, you must leave the two cycles to reach the end before you open or manipulate any part of your appliance (refer to “double cycle” text at coffee mode instructions).
7. Once the water reaches the perfect temperature, in about 5 minutes, the water will rise through the siphon tube up to the upper vessel, once the programmed time ends, about 1 more minute, the water will descend suddenly to the jar, this means your beverage is ready! These times are those of one infusion cycle if you choose two cycles, you will experience twice the process, before pouring your beverage.
8. Once the cycle ends (either 1 or 2), verify the blue light is off, unplug your appliance, and remove it from the heating plaque holding it from its handle.
9. Separate the upper vessel from the jar. To remove the siphon tube use the jar lid and align the gaps of the lid with the flanges of the siphon tube (for reference, match the “POUR” line with the handle´s mark) and firmly press down to match the flanges into the gaps, then turn counter-clockwise until the siphon tube releases from the jar and raise the lid to take the tube out. DO NOT REMOVE THE SIPHON TUBE WITH YOUR BARE HANDS!
10. Rinse the siphon tube with cold water to cool off, then you can remove it from the lid.
11. Place the jar lid over the jar aligning the “UNLOCK” line with the handle´s mark, turn the lid clockwise until the “POUR” line matches with the mark of the handle and pour.

CAUTION! PLACE THE LID OVER THE JAR BEFORE SERVING

CAUTION:
Don’t turn the upper vessel handle or remove the upper vessel during the brewing cycle, scalding may occur if the upper vessel or lid is removed during the brewing cycle.

HOW TO DISASSEMBLE?

• Mesh filter: Take out the mesh filter from the jar by turning it strongly counterclockwise to release it and lift it.
• Upper vessel: Hold the jar´s handle with one of your hands, and then turn the upper vessel counterclockwise from its handle with the other hand to release and lift.
• Take out the siphon tube from the jar by turning it counterclockwise to release and lift.

CAUTION!
IF THE APPLIANCE HAS BEEN RECENTLY USED AND IS STILL HOT DON´T USE YOUR BARE HANDS TO REMOVE THE TUBE, PLEASE USE THE JAR´S LID FOLLOWING STEP NUMBER 9 FROM “COFFEE MODE” INSTRUCTIONS

CLEANING PROCEDURE

BEFORE USING THE APPLIANCE FOR THE FIRST TIME

1. Wash thoroughly every single part of your coffee machine with a soft sponge, water, and soap, except the heating plaque.
2. Follow the instructions to perform one coffee cycle without putting any coffee into the upper vessel.
3. Do not submerge or get the plug base and plug wet, or hold it directly under the water tap.

CLEANING DIRECTIONS

1. Always remember to turn the appliance off and unplug it from the electric power source. Remove the heating plaque, since this particular item cannot be submerged or washed with water.
2. Wash the jar, siphon tube, jar, and upper vessel lids with a sponge, water, and dishwasher light soap, please allow them to dry completely before assembling them again. DO NOT USE ANY ABRASIVE FIBERS.
3. The upper vessel must be washed with hot water and a soft sponge to maintain its crystal-clear appearance.
4. It is our recommendation to wash the mesh filter with a small brush so that you can remove thoroughly the ground coffee residuals.
5. Clean the heating plaque with a lightly wet cloth.
6. All ensemble parts except the heating plaque are dishwasher-suitable.
7. Do not use any solvents, acid factor PH substances, or any abrasive product while cleaning your appliance.
8. Do not submerge or get the heating plaque wet, or hold it directly under the water tap.
9. We recommend cleaning the appliance regularly and removing the ground coffee residuals after every use.
10. You must wait for every washable ac-ce-stories to completely dry before ensembling them back and use the appliance again.

DECALCIFICATION

• In order for your coffee machine to continue its perfect way of preparing your beverages, from time to time you must get rid of the minerals residuals left behind by the hardness of the water with a specific anti-calc product suitable for your coffee machine.
• The frequency with which you will have to perform this operation may vary depending on the water hardness of every location and how much you use your coffee machine. If you use your appliance twice a day follow this guideline:
  • Soft water, every 6 months
  • Medium hard water, every 2 to 3 months
  • Hard water, every 6 to 8 weeks.
• Fill your coffee machine with the anti-calc product as if you were preparing coffee and once the process ends, rinse thoroughly and repeatedly with water before using your appliance again.

CARE AND MAINTENANCE
This appliance requires very little maintenance and does not contain parts that can be repaid-blue. Do not try to repair them yourself. In case your appliance fails take it to an authorized service center.

STORAGE

• Before you store your coffee machine,
• Be sure it is off and unplug it from the electric source. Clean your coffee machine as described in the “Cleaning Procedure” part. Be sure it is completely dry and store your coffee machine in a clean, dry place away from the reach of children or people with any disability.

DEFECTS AND REPAIR

If the electrical cord is damaged, this must be replaced by the manufacturer in any of their authorized service centers, and by qualified personnel, so that further damage can be avoided. Ever tried to repair your appliance by yourself? Follow the same procedure in case of any other defect.

SPECIAL RECOMMENDATIONS
SOLAC is not responsible for any malfunction because of a wrong understanding of the text in this instructions manual.in case you need further instructions please contact your seller.

GUARANTEE

• This coffee machine is guaranteed by SOLAC for a two-year term, starting from the purchase date.

TERMS AND CONDITIONS

• In order to claim the guarantee, one would only need the appliance itself and this guarantee policy, filled up correctly, containing both the seal and the purchasing date from the selling establishment, either in the actual place where it was purchased or in any authorized service center, which appears on the directory contained with this appliance.
• Our guarantee includes repair, and replacement of a new appliance and/or any component free of charge, including the labor, as well as the freight cost in accordance of this certificate.
• The repair time will not be more than 30 days from the reception time in any authorized service center where this guarantee can be claimed.
• The consumer could claim the guarantee of his appliance directly at the place where it was originally acquired.
• IMPORTANT NOTICE: In case the consumer loses this guarantee, he can contact the supplier directly to acquire another guarantee, by presenting the purchase receipt or the commercial invoice.

EXCLUSION CLAUSE

This guarantee does not apply to the:

1. When the appliance has been used under abnormal conditions.
2. When the appliance has been used under different conditions as those described in this manual.
3. When the appliance has been disarmed, repaiblueor in any way modified by non-authori-zed people by TAURUS ESPAÑA S.A. DE C.V. No other verbal nor written guarantee outside this one just described will be in any way acknowledged by TAURUS ESPAÑA S.A. DE C.V. Original parts and components can be acquired at any authorized service center which appears on the directory included.

TO CLAIM THE GUARANTEE OF YOUR APPLIANCE

1. Show the appliance along with this guarantee policy, filled up correctly and with the date and seal from the establishment where it was purchased, to your nearest authorized service center. You can locate your nearest authorized service center from the directory included with your appliance or online at www.solac.mx
2. If you are not able to find an authorized service center near you please call 01-800-777-8162 where someone will let you know how to claim the guarantee of your appliance.

FREQUENTLY ASKED QUESTIONS

CONCERN

| LIKELY CAUSE|

SOLUTION

---|---|---
I cannot turn on my coffee machine.| The jar is not properly placed on the heating plaque.| Remove the jar and place it again until it is correctly placed.

Water do not raise up from the jar to the upper vessel.

| Wrong ensemble.| Verify that the siphon tube is set and secured inside the jar and that both handles are correctly aligned.
Water level too low.| Verify that the water level is above the minimum level of 21.12 oz. (0.6 l)
You forgot to turn the coffee machine on or to plug it to the electrical. power source| Verify that the heating plaque is connected and the appliance turned on (blue light button should be on)
There are ground coffee or tea residuals inside the jar.| ****

The mesh filter was not set properly

| Always make sure that the mesh filter is well set before using your appliance either for making coffee or tea.

Do not forget to turn clockwise to correctly set the filter.

Coffee does not go down from the upper vessel to the jar.

| Wrong grounding of the coffee.| Verify that the coffee grounding is medium and not too fine since the filter may be clogged.
Too much ground coffee.| Do not put more than the maximum amount of ground coffee which is 1.76 oz. (50 g)
Ensemble the wrong way.| Verify that the upper vessel is set properly over the jar and that both handles are aligned.

The coffee or tea overflows or spills from the upper vessel.

| Overfill.| Make sure not to fill with water over the jar’s maximum level.
Reheat,| Do not reheat your coffee or tea since it can overflow the container.
Missing lid.| The upper vessel lid is not properly placed.
The water overflows the jar when used as boiler mode.| Overfill.| Make sure not to fill the jar over its maximum limit of 23.67 oz. (0.7 l) for water boiler mode.
The Siphon tube is set.| Make sure the siphon tube is not set when using this mode.
Missing lid.| he jar´s lid must be set and aligned along with the “BOIL” line as well as the mark of the handle.

WARRANTY AND TECHNICAL ASSISTANCE

This product enjoys the recognition and protection of the legal guarantee per current legislation. To enforce your rights or interests you must go to any of our official technical assistance services.

• You can find the closest one by accessing the following web link: http://solac.com.
• You can also request related information by con-tacting us by phone.
• You can download this instruction manual and its updates at http://solac.com.

ES) ESPAÑA – EUROPE

• Avda. Los Huetos, 79-81 1010 Vitoria 902012539
• atencioncliente@solac.com.

FR) FRANCIA – EUROPE

• ZA Les Bas Musats, 18 Les Bas Musats 89100 Malay-le-Grand
• 03 86 83 90 90

www.solac-usa.com.

References

• manual.in
• SOLAC, tienda online de electrodomésticos – sOlac
• USA Location information - USA.com
• Espresso Machine Repair, Coffee and Espresso Machines | Bergenfield, NJ
• SOLAC USA

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>