solac BV5727 Beauty Jar Blender Instruction Manual

: June 10, 2024
: sOlac

Table of Contents

solac BV5727 Beauty Jar Blender
Product Information
PRODUCT Technical Specifications
Package Contents
Product Usage Instructions
PRODUCT Cleaning Instructions
Safety Instructions
DESCRIPTION
USE AND CARE
INSTRUCTIONS FOR USE
CLEANING
SPECIFICATION
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

solac BV5727 Beauty Jar Blender

solac-BV5727-Beauty-Jar-Blender-product

Product Information

This product is a blender equipped with a motor body, a jar, a lid, sealing lid ring, blade set, sealing blade ring, jar base, speed selector knob, pulse function, and ice crush function. The removable blades and self-cleaning function make it easy to clean and maintain.

PRODUCT Technical Specifications

Capacity: 1500ml
Electronic speed control
Thermal safety protection
Pulse function for optimal blending
Ice crush function for making crushed ice or frozen drinks

Package Contents

Cup
Lid
Sealing lid ring
Jar
Blade set
Sealing blade ring
Jar base
Motor body
Speed selector knob
Pulse function / Ice crush function

Product Usage Instructions

Before Use

Remove all packaging materials and check that all parts are included.
Wash all parts in warm soapy water before the first use.

Instructions for Use

Place the jar on the base.
Add the ingredients to the jar, making sure not to exceed the maximum fill line.
Place the lid on the jar and secure it with the sealing lid ring.
Select the desired speed using the speed selector knob.
To use the pulse function or ice crush function, press and hold the pulse button.
When finished blending, turn off the appliance and unplug it from the power supply.

PRODUCT Cleaning Instructions

After each use, rinse all parts with warm water and mild detergent.
The blades can be removed for more thorough cleaning.
The appliance also has a self-cleaning function. Fill the jar halfway with warm water and a drop of dish soap, then run the blender on high for a few seconds.

Safety Instructions

Do not operate the blender without the lid in place.
Do not exceed the maximum fill line.
Do not touch the blades while they are in motion.
Only use the appliance for its intended purpose.

DESCRIPTION

solac-BV5727-Beauty-Jar-Blender-fig-1

A Cup
B Lid
C Sealing lid ring
D Jar
E Blade set
F Sealing Blade ring
G Jar base
H Motor body
I Speed selector knob
J Pulse function / Picahielos

USE AND CARE

Fully extend the appliance’s power cable before each use.
Do not use the appliance if its accessories are not properly fitted.
Do not use the appliance if the accessories attached to it are defective. Replace them immediately.
Do not use the appliance while the jug is empty.
Do not use the appliance if the on/off switch does not work.
Do not move the appliance while in use.
Do not turn the appliance over while it is in use or connected to the mains.
Do not force the appliance’s work capacity.
Respect the MAX level indicator. (1500 ml).
When using hot liquids do not fill the jug more than half way. At all times, when mixing hot liquids in the jug, select the slowest speed on the speed selector.
Store this appliance out of reach of children and/or persons with physical, sensory or reduced mental or lack of experience and knowledge.
Keep the appliance in good condition. Check that the moving parts are not misaligned or jammed and make sure there are no broken parts or anomalies that may prevent the appliance from operating correctly.
Never use liquids that are boiling or ingredients whose temperature exceeds 80ºC.
Do not use the jar immediately after taking it out of the dishwasher or the refrigerator, ensure that the jar is at room temperature.
Check that the lid is closed properly before starting the appliance.
Do not use the appliance for more than 2 minutes at a time. In case of operate in cycles; allow the appliance a resting period of at least 2 minutes between each cycle. Under no circircumstances should the appliance be operated for more time than necessary.
Do not use the appliance with frozen goods or those containing bones.
CAUTION: Do not use the appliance if the glass is cracked or broken.

INSTRUCTIONS FOR USE

BEFORE USE

Make sure that all products’ packaging has been removed.
Before using the product for the first time, clean the parts that will come into contact with food inthe manner described in the cleaning section.

USE

Extend the cable completely before plugging it in.
Ensure the blade fixing ring is fixed properly to the jar (by turning counter clockwise) before putting on the motor body. (Fig.1).
Place the jar onto to the motor unit until it fits properly into place (Fig.2).
Put the ingredients, after having first chopped them into small piece, into the jar with liquid (do not exceed the maximum marker).
Put the lid on the jar; make sure it is properly fixed in place.
Put the cup in the lid.
Connect the appliance to the mains.
The pilot light comes on.
Turn the appliance on, by using the selection knob.
If you wish to add more ingredients pull out the cup.
Add the ingredients and replace the cup.
To stop the appliance set the speed back to “0”.
To avoid a fierce start up of the fan, it is advisable to start off from the lowest speed position and, once the fan has been switched on, progressively increase the speed to the desired position.

ELECTRONIC SPEED CONTROL

The speed of the appliance can be regulated by using the speed regulator control (I). This function is very useful, as it makes it possible to adapt the speed of the appliance to the type of work that needs to be done.

ONCE YOU HAVE FINISHED USING THE APPLIANCE

Stop the appliance, selecting position 0 on the selector control.
Unplug the appliance from the mains.
Lift the jar from the motor body.
Clean the appliance.

“PULSE / ICE CRUSH” FUNCTION

The appliance works in highest speed to achieve optimal performance.
This function gives optimal result for ice-crushing, up to desired snowy level.
Trun the speed selector knob to the left to operate the Pulse function (J).
We recommend working by turning the knob in cycles of 3 seconds and repeating the operation until you obtain the desired result.

SAFETY THERMAL PROTECTOR

The appliance has a safety device, which protects the appliance from overheating.
If the appliance turns itself off and does not switch itself on again, disconnect it from the mains supply, and wait for approximately 15 minutes before reconnecting. If the machine does not start again seek authorized technical assistance.

CLEANING

Disconnect the appliance from the mains and allow it to cool before undertaking any cleaning task.
Clean the equipment with a damp cloth with a few drops of washing-up liquid and then dry.
Do not use solvents, or products with an acid or base pH such as bleach, or abrasive products, for cleaning the appliance.
Do not let water or any other liquid get into the air vents to avoid damage to the inner parts of the appliance.
Never submerge the appliance in water or any other liquid or place it under running water.
During the cleaning process, take special care with the blades, as they are very sharp.
If the appliance is not in good condition of cleanliness, its surface may degrade and inexorably affect the duration of the appliance’s useful life and could become unsafe to use.
The following pieces may be washed in a dishwasher (using a soft cleaning program):
- Jug
- Cup
- Lid.
Then dry all parts before its assembly and storage.

SELF-CLEANING FUNCTION

Put water and a small amount of washing-up liquid in the jar.
Select the function “turbo”.

REMOVABLE BLADES FOR EFFECTIVE CLEANING

Disconnect the appliance from the mains and allow it to cool before undertaking any cleaning task.
Loosen the jar base by turning it in counterclockwise direction. (Fig.3).
Remove the blade set, sealing blade ring and jar base and clean them. (Fig.4).
After cleaning, replace the blade set and turn blade fixing ring in opposite direction. (Fig.5).