Otter BOX 78-80564 Charging Stand User Guide
- June 6, 2024
- Otter BOX
Table of Contents
Otter BOX 78-80564 Charging Stand
Unpacking
Components
- USB-C Port
- Charging Pad
Charging vour device
Specification
| Input | 5V3A 9V2.22A 12V/1.67A |
|---|---|
| Output | Wireless 15W (Max) |
| Size Dimensiones | 124.6X89.6X125.8mm |
| Weight | 220g |
| Temperature | Operating Temp: 0ºC~ +35 ºC |
Storage Temp.: -20°C~ +70 ºC
Manufacturer:
Company Name: DONGGUAN KETAIHONG ELECTRONICS CO.,LTD Address : Second
Industrial Zone, Shujiu Village, Changping Town, 523569 Dongguan, Guangdong,
PEOPLE’S REPUBLIC OF CHINA
Contact
For more information, please visit https://www.otterbox.com
Attention / Atenciom
| Do not expose products to excessive heat (e.g. from storage in direct
sunlight, fire or the like).
---|---
| Do not try to take the product apart. It may cause serious damage
| Do not drop or knock the product on hard surfaces.
| Do not use chemicals or detergents to clean the product.
| Use the original cable or certified cables.
WARING – Do not hang any type of accessory or accessory bracket from the plug.
Warranty
FCC Statement
Federal Communication Commission Interference Statement This equipment has
been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential
installation. This equipment generates, uses, and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
FCC Caution:
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Non-modification Statement:
Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
Radiation Exposure Statement
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated with
minimum distance 20cm between the radiator and your body.
ISED Statement
This device complies with Industry Canada licence-exempt RSS standard(s).
Operation is subject to the following two conditions:
(1) This device may not cause interference, and
(2) This device must accept any interference, including interference that may
cause undesired operation of the device.
Radiation Exposure Statement
This equipment complies with Canada radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated with
minimum distance 10cm between the radiator & your body.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>