Otter BOX 78-80565 3-In-1 Charging Station User Guide

June 6, 2024
Otter BOX

Otter BOX logo

Otter BOX 78-80565 3-In-1 Charging Station

Otter BOX 78-80565 3-In-1 Charging Station image

COMPONENTS

Otter BOX 78-80565 3-In-1 Charging Station fig1

  1. Input USB-C Port
  2. Output USB-A Port
  3. Output Wireless 1
  4. Output Wireless 2

Charging Your device

Otter BOX 78-80565 3-In-1 Charging Station fig2

Apple watch holder is just a holder, needs to use Apple original Apple Watch charging cable to charge the Apple watch.

Specification

input 5V/3A 9V/3A 12V/3A
output Wireless 1: 15W (Max) Wireless 2: 5W (Max) USB A: 5W (Max)
size dimensions 151.0X89.0X129.8mm
weight 282g
temperature  operating temp 0c +35

atorage temp -20c +70c

Manufacturer:
Company Name: DONGGUAN KETAIHONG ELECTRONICS CO.,LTD Address: Second Industrial Zone, Shujiu Village, Changping Town523569 Dongguan, Guangdong, PEOPLE’S REPUBLIC OF CHINA

CONTACT

https://www.otterbox.com

Otter BOX 78-80565 3-In-1 Charging Station fig3

ATTENTION

Otter BOX 78-80565 3-In-1 Charging Station fig4 WARNING – Do not hang any type of accessory or accessory bracket from the plug

FCC Statement

Federal Communication Commission Interference Statement
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and receiver.
  • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or an experienced radio/TV technician for help.

FCC Caution:
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Non-modification Statement:
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

Radiation Exposure Statement
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator and your body.

WARRANTY

ISED Statement
This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions:

  1. This device may not cause interference, and
  2. This device must accept any interference, including interference that may cause undesired operation of the device.

Radiation Exposure Statement
This equipment complies with Canada radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals