Kraus KPF-1691 Britt Single Handle Kitchen Faucet Installation Guide

: June 6, 2024
: Kraus

Table of Contents

Kraus KPF-1691 Britt Single Handle Kitchen Faucet
Prior to Installation
Tools you will need
Diagram and Parts List
Faucet Dimension
Replacement Parts
Troubleshooting
Care & Maintenance
Codes/Standards Applicable
Read User Manual Online (PDF format)
Download This Manual (PDF format)

Kraus KPF-1691 Britt Single Handle Kitchen Faucet

Congratulations on the purchase of your new Kraus plumbing fixture
Please keep the box and packaging materials until your product is completely installed. If you have any questions, require technical assistance, or have any problems with your product:

DO NOT RETURN TO STORE
Please contact our Customer Service Team 1-800-775-0703 / customerservice@kraususa.com

Have the model number available, and retain a copy of your receipt with purchase date for reference.
If for any reason this product does not meet your expectations, please be sure to repack this product in the original box and packaging material to avoid damage during transit.

Prior to Installation

Make sure you have all necessary parts by checking the diagram and parts list. If any part is missing or damaged, please contact Kraus Customer Service at 800-775-0703 for a replacement
Turn off the hot and cold water lines at the angle stops and turn on the old faucet to release any built-up pressure
Pre-drilled countertop hole size requirement: 1-3/8”(min)
Max countertop thickness: 3-1/8”

Tools you will need

tools

Diagram and Parts List

A. Spray Head
B. Faucet Body
C. Flange
D. Rubber Washer
E. Metal Washer
F. Mounting Nut
G. Screws
H. Weight
I. Weight Clip
J. Quick Connector
K. Hex Wrench

Faucet Dimension

Installer Tip: Shut off main water supply before installing new faucet.

Step 1: Installing the faucet

Installing the faucet

Shut off the water supply. Place faucet (B) through the hole in countertop.
Secure the faucet (B) to the countertop using the rubber washer (D), metal washer (E) and mounting nut (F) provided. Tighten screws (G).

Step 2: Securing the faucet assembly

Securing the faucet assembly

Push the quick connector (J) firmly upward and attach it to the receiving block (a). Pull down moderately to ensure the connection has been made.

Step 3: Securing the faucet assembly

Securing the faucet assembly-1

Install the weight clip (I) at the point of the hose marking “weight here”. Insert the weight (H) onto the weight clip (I) by sliding it down onto the weight clip (I).

Step 4: Connect waterlines to main valve

Connect waterlines to main valve

Attach waterlines to angle stops and tighten until snug. Turn on angles stops and check for leaks (DO NOT TURN FAUCET ON)

Step 5: Flush faucet

Flush faucet

NOTE: Please make sure washer is installed attaching spray head to hose.

Pull the hose assembly out of the spout and remove the spray head (A) by unscrewing it from the hose in a counterclockwise direction. Be sure to hold the end of the hose down into the sink and turn the faucet on to the warm position where it mixes hot and cold water. Flush the water lines for one minute. This Fushesaway any debris that could cause damage to internal parts. Check for leaks.
Re-tighten any connections if necessary, but do not overtighten. Reinstall the spray head (A) by hand tightening it back onto the spray hose.
After installation is completed, turn on the hot and cold water supplies. Check for leaks.

Replacement Parts

Replacement Parts List| Finish / Color| Part #|
---|---|---|---
1. Sprayer Head| SFACB, BB,| KP27195|
SFS,MB
2. Washer| | KP27208|
3. Inverter| BL, GR| KP27242|
4. Sprayer Hose| BLSFACB, BLBB, BLMB, GRSFS*| KP27244|
5. Spring Assembly| SFACB, BB,

SFS,MB*

| KP27243|
6. Screw| | KP27084|
7. Index| BL, GR*| KP27124|
8. Cartridge| | KP27083|
9. Bonnet Nut| | KP27238|
10. Cap & O-ring| | KP27239|
SFACB, BB,

SFS,MB*

SFS,MB*

| KP27041|
16. Rubber & Metal Washer| | KP27028|
17. Mounting Nut & Screw| | KP27079|
18. Block| | KP27073|
19. O-Ring| | KP27092|
20. 1.8GPM Flow Restrictor| WHITE| KP27074-WH|
21. Quick Connector Assembly| | KP27090|
22. Weight & Clip Assembly| | KP27212|
23. Filter Washer| | KP27167|

Denotes faucet component color options:
SFACB – Spot Free Antique Champagne Bronze; GR – Grey; BL – Black;
SFS – Spot Free Stainless Steel ; MB – Matte Black; BB – Brushed Brass;
Black hose with Spot-Free Antique Champagne Bronze (BLSFACB);
Black hose with Brushed Brass (BLBB); Black hose with Matte Black (BLMB);
Grey hose with Spot Free Stainless Steel (GRSFS)

Troubleshooting

If you have followed the instructions carefully and your faucet still does not work properly, take the following corrective steps:

Troubleshooting

Care & Maintenance

To keep the product clean & shining, follow the steps below：

Care & Maintenance

Rinse with clean water & dry with a soft cloth
Do not clean with soaps, acid, polish, abrasives, or harsh cleaners
Do not use cloth with a coarse surface
Unscrew the aerator and clean when necessary

This installation manual is subject to change without further notice.

Codes/Standards Applicable

code

Faucet Warranty

Kraus products are manufactured and tested to the highest quality standards by Kraus USA Inc. (“Kraus”).
Kraus extends this warranty to the original purchaser for personal household use of the “Faucet” in its original location. The warranty is non- transferable.

Kraus warrants the structure and ﬁnish of the product to be free from defects in material and workmanship under normal usage for the lifetime of the product. The warranty commences from the initial date of purchase by the owner or trade professional, from an authorized Kraus dealer, through the lifetime of the original owner or end-user.

Kraus warrants the mechanical components such as but not limited to sprayhead assembly (includes engine, aerators, structure, restrictors, back ﬂow preventers, sprayer hoses, braided supply line hoses which encompasses nylon,silicon and stainless steel, etc) of the product to be free from defects in material and workmanship under normal usage for a period of one (1) year. The warranty commences from the initial date of purchase by the owner or trade professional, from an authorized Kraus dealer, through the one (1) year term of the original owner or end-user.

Kraus warrants the mechanical component (cartridge) of the product to be free from defects in material and workmanship under normal usage for a period of ﬁve (5) years. The warranty commences from the initial date of purchase by the owner or trade professional, from an authorized Kraus dealer, through the ﬁve (5) year term of the original owner or end-user.

Kraus warrants all electronic parts other than batteries to be free from defects in material and workmanship for a period of two (2) years. The warranty commences from the initial date of purchase by the owner or trade professional, from an authorized Kraus dealer, through the two (2) year term of the original owner or end-user. No warranty is provided on batteries.

Any product reported to the authorized dealer or to Kraus as being defective within the warranty period will be repaired or replaced with a product of equal value at the option of Kraus. This warranty extends to the original owner or end-user, and is not transferable to a subsequent owner.

Restrictions

This warranty does not cover antediluvian, discontinued, or display products, whether such items are purchased at discount outlets, unauthorized dealers, and/or sold on clearance.

This warranty does not cover instances of negligence, misuse, abuse, improper installation, carelessness, accident, hard water or mineral deposits, exposure to corrosive materials, misapplication, damages caused by improper maintenance, alteration of the product, or failure to follow care or installation instructions enclosed with your product. Avoid using abrasive cleaners such as powders, bleach, ammonia, alcohol, or chlorine. Avoid using abrasive pads, steel wool, or wire brushes, as these will damage and wear down the ﬁnish.

This warranty does not apply to Products that have not been installed or operated in accordance with instructions supplied by Kraus and all applicable rules, regulations, and legislation pertaining to such installations.

This warranty does not apply unless the Kraus product is installed by a fully insured and licensed trade professional. Kraus insists that such professionals have experience in the installation of bathroom and kitchen manufactured goods.

This warranty does not cover labor charges or costs of removal and reinstallation of said product. This warranty does not allow recovery of incidental or consequential damages, such as loss of use, delay, property damage, or other consequential damages, and Kraus accepts no liability for such damages.

This warranty does not cover Marine or Outdoor Installation.
Except as otherwise provided above, Kraus makes no warranties, expressed or implied, including warranties of merchantability and ﬁtness for a particular purpose, or compliance with any code.

Shipping charges will be covered foe the ﬁrst (1) year of the warranted replacement part or product (HI, AK, and Puerto Rico shipping charges may apply). International shipping fees are not included.

Commercial Warranty

Kraus extends the above warranty for a period of one (1) year to purchasers of products for industrial, commercial, and business use.
All incidental or consequential damages are speciﬁcally excluded. No additional warranties, express or implied, are given, including but not limited to any implied warranty of merchantability or ﬁtness for a particular purpose.

Some states do not allow the exclusion or limitation of incidental or consequential damages or limitations on how long an implied warranty lasts, so the above limitations or exclusions may not apply to you. This warranty gives you speciﬁc legal rights, and you may also have other rights which vary from state to state.

If you are a homeowner please contact a Kraus Customer Service Representative at:
Kraus USA, Inc.
12 Harbor Park Drive
Port Washington, NY 11050
Toll-free 800-775-0703
Customerservice@kraususa.com

If you are a plumbing contractor or trade professional please contact a Kraus Pro Representative at:
Kraus USA, Inc.
12 Harbor Park Drive
Port Washington, NY 11050
516-801-8955
Proservice@kraususa.com

If you are an Authorized Partner please contact a Partner Support Representative at:
Kraus USA, Inc.
12 Harbor Park Drive
Port Washington, NY 11050
516-801-8954
Partnersupport@kraususa.com

In requesting warranty service, please be ready to provide: