Kraus KPF-2820 Oletto Single Handle Pull Down Kitchen Faucet Installation Guide
- June 6, 2024
- Kraus
Table of Contents
- Kraus KPF-2820 Oletto Single Handle Pull Down Kitchen Faucet
- Prior to Installation:
- Tools you will need
- Diagram and Parts List
- Faucet Dimension (For KPF-2821)
- Faucet Dimension (For KPF-2820)
- Replacement Parts
- Troubleshooting
- Care & Maintenance
- Codes/Standards Applicable
- References
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
Kraus KPF-2820 Oletto Single Handle Pull Down Kitchen Faucet
Congratulations on the purchase of your new Kraus plumbing fixture
Please keep the box and packaging materials until your product is completely
installed. If you have any questions, require technical assistance, or
have any problems with your product:
DO NOT RETURN TO STORE
Please contact our Customer Service Team
1-800-775-0703 /
customerservice@kraususa.com
Have the model number available, and retain a copy of your receipt with
purchase date for reference.
If for any reason this product does not meet your expectations, please be sure
to repack this product in the original box and packaging material to avoid
damage during transit.
Prior to Installation:
- Make sure you have all necessary parts by checking the diagram and parts list. If any part is missing or damaged, please contact Kraus Customer Service at 800-775-0703 for a replacement
- Turn off the hot and cold water lines at the angle stops and turn on the old faucet to release any built-up pressure
- Pre-drilled countertop hole size requirement: 1-3/8”(min)
- Max countertop thickness: 3”
Tools you will need
Diagram and Parts List
A. Faucet Body
B. Flange
C. Rubber Washer
D. Metal Washer
E. Mounting Nut
F. Screws
G. Weight
H. Weight Clip
I. Quick Connector
J. Hex Wrench
Faucet Dimension (For KPF-2821)
Installer Tip: Shut off main water supply before installing new faucet.
Faucet Dimension (For KPF-2820)
Installer Tip: Shut off main water supply before installing new faucet.
Step 1: Installing the faucet
Shut off the water supply. Place faucet (A) through the hole in countertop.
Secure the faucet (A) to the countertop using the rubber washer (C), metal
washer (D) and mounting nut (E) provided. Tighten screws (F).
Step 2: Securing the faucet assembly
Push the quick connector (I) firmly upward and attach it to the receiving block (a). Pull down moderately to ensure the connection has been made.
Step 3: Securing the faucet assembly
Install the weight clip (H) at the point of the hose marking “weight here”. Insert the weight (G) onto the weight clip (H) by sliding it down onto the weight clip (H).
Step 4: Connect waterlines to main valve
Attach waterlines to angle stops and tighten until snug. Turn on angles stops and check for leaks (DO NOT TURN FAUCET ON)
Step 5: Flush faucet
Pull the hose assembly out of the spout and remove the spray head by
unscrewing it from the hose in a counterclockwise direction. Be sure to hold
the end of the hose down into the sink and turn the faucet on to the warm
position where it mixes hot and cold water. Flush the water lines for one
minute. This Fushesaway any debris that could cause damage to internal parts.
Check for leaks. Re-tighten any connections if necessary, but do not
overtighten. Reinstall the spray head by hand tightening it back onto the
spray hose.
After installation is completed, turn on the hot and cold water supplies.
Check for leaks.
Replacement Parts
Replacement Parts List| Finish / Color| Part #|
---|---|---|---
1. Sprayer Head| SFS, MB, SFACB, BB*| KP27207|
2. Sprayer Washer| | KP27208|
3. Sprayer Hose
|
GRSFS, BLMB, BLSFACB, BLBB*
| KP27209
(For KPF-2820)
|
KP27233
(For KPF-2821)
|
4. O-ring| | KP27210|
5. Inverter| | KP27211|
6. Cartridge| | KP27069|
7. Bonnet Nut| | KP27202|
8. Cap & O-ring| SFS, MB,
SFACB, BB*
| KP27203|
9. Handle| SFS, MB, SFACB, BB| KP27204|
10. Set Screw| | KP27001|
11. Cover Botton| GR, BL| KP27002|
12. Flange & Washer| SFS, MB,
SFACB, BB*
| KP27205|
13. Block| | KP27073|
14. O-ring| | KP27092|
15. Rubber & Metal Washer| | KP27028|
16. Mounting Nut & Screw| | KP27079|
17. Weight & Clip Assembly| | KP27212|
18. Filter Washer| | KP27167|
19. 1.8GPM Flow Restrictor| WHITE| KP27074-WH|
20. Quick Connector
Assembly
| | KP27090|
21. Hex Wrench| | KP27020|
Denotes faucet component color options:
SFS – Spot Free Stainless Steel ; MB – Matte Black; SFACB – Spot Free Antique
Champagne Bronze
GR – Grey; BL – Black; BB – Brushed Brass; Grey hose with Spot Free Stainless
Steel (GRSFS);
Black hose with Matte Black (BLMB); Black hose with Brushed Brass (BLBB);
Black hose with Spot-Free Antique Champagne Bronze (BLSFACB)
Troubleshooting
If you have followed the instructions carefully and your faucet still does not work properly, take the following corrective steps:
Care & Maintenance
To keep the product clean & shining, follow the steps below:
- Rinse with clean water & dry with a soft cloth
- Do not clean with soaps, acid, polish, abrasives, or harsh cleaners
- Do not use cloth with a coarse surface
- Unscrew the aerator and clean when necessary
This installation manual is subject to change without further notice.
Codes/Standards Applicable
Faucet Warranty
Kraus products are manufactured and tested to the highest quality standards by
Kraus USA Inc. (“Kraus”).
Kraus extends this warranty to the original purchaser for personal household
use of the “Faucet” in its original location. The warranty is non-
transferable.
Kraus warrants the structure and finish of the product to be free from defects
in material and workmanship under normal usage for the lifetime of the
product. The warranty commences from the initial date of purchase by the owner
or trade professional, from an authorized Kraus dealer, through the lifetime
of the original owner or end-user.
Kraus warrants the mechanical components such as but not limited to sprayhead assembly (includes engine, aerators, structure, restrictors, back flow preventers, sprayer hoses, braided supply line hoses which encompasses nylon,silicon and stainless steel, etc) of the product to be free from defects in material and workmanship under normal usage for a period of one (1) year. The warranty commences from the initial date of purchase by the owner or trade professional, from an authorized Kraus dealer, through the one (1) year term of the original owner or end-user.
Kraus warrants the mechanical component (cartridge) of the product to be free from defects in material and workmanship under normal usage for a period of five (5) years. The warranty commences from the initial date of purchase by the owner or trade professional, from an authorized Kraus dealer, through the five (5) year term of the original owner or end-user.
Kraus warrants all electronic parts other than batteries to be free from defects in material and workmanship for a period of two (2) years. The warranty commences from the initial date of purchase by the owner or trade professional, from an authorized Kraus dealer, through the two (2) year term of the original owner or end-user. No warranty is provided on batteries.
Any product reported to the authorized dealer or to Kraus as being defective within the warranty period will be repaired or replaced with a product of equal value at the option of Kraus. This warranty extends to the original owner or end-user, and is not transferable to a subsequent owner.
Restrictions
This warranty does not cover antediluvian, discontinued, or display products,
whether such items are purchased at discount outlets, unauthorized dealers,
and/or sold on clearance.
This warranty does not cover instances of negligence, misuse, abuse, improper
installation, carelessness, accident, hard water or mineral deposits, exposure
to corrosive materials, misapplication, damages caused by improper
maintenance, alteration of the product, or failure to follow care or
installation instructions enclosed with your product. Avoid using abrasive
cleaners such as powders, bleach, ammonia, alcohol, or chlorine. Avoid using
abrasive pads, steel wool, or wire brushes, as these will damage and wear down
the finish.
This warranty does not apply to Products that have not been installed or operated in accordance with instructions supplied by Kraus and all applicable rules, regulations, and legislation pertaining to such installations.
This warranty does not apply unless the Kraus product is installed by a fully insured and licensed trade professional. Kraus insists that such professionals have experience in the installation of bathroom and kitchen manufactured goods.
This warranty does not cover labor charges or costs of removal and reinstallation of said product. This warranty does not allow recovery of incidental or consequential damages, such as loss of use, delay, property damage, or other consequential damages, and Kraus accepts no liability for such damages.
This warranty does not cover Marine or Outdoor Installation.
Except as otherwise provided above, Kraus makes no warranties, expressed or
implied, including warranties of merchantability and fitness for a particular
purpose, or compliance with any code.
Shipping charges will be covered foe the first (1) year of the warranted replacement part or product (HI, AK, and Puerto Rico shipping charges may apply). International shipping fees are not included.
Commercial Warranty
Kraus extends the above warranty for a period of one (1) year to purchasers of
products for industrial, commercial, and business use.
All incidental or consequential damages are specifically excluded. No
additional warranties, express or implied, are given, including but not
limited to any implied warranty of merchantability or fitness for a particular
purpose.
Some states do not allow the exclusion or limitation of incidental or consequential damages or limitations on how long an implied warranty lasts, so the above limitations or exclusions may not apply to you. This warranty gives you specific legal rights, and you may also have other rights which vary from state to state.
If you are a homeowner please contact a Kraus Customer Service
Representative at:
Kraus USA, Inc.
12 Harbor Park Drive
Port Washington, NY 11050
Toll-free 800-775-0703
Customerservice@kraususa.com
If you are a plumbing contractor or trade professional please contact a
Kraus Pro Representative at:
Kraus USA, Inc.
12 Harbor Park Drive
Port Washington, NY 11050
516-801-8955
Proservice@kraususa.com
If you are an Authorized Partner please contact a Partner Support
Representative at:
Kraus USA, Inc.
12 Harbor Park Drive
Port Washington, NY 11050
516-801-8954
Partnersupport@kraususa.com
In requesting warranty service, please be ready to provide:
1. Proof of purchase.
2. A description of the problem.
Download the Kraus Care & Maintenance Guide at: http://www.kraususa.com/maintenance
IMPORTANT: Register Your Kraus Product
Activate Your Warranty
Access Premium Customer Support
Get Product Information
REGISTER TODAY
http://www.kraususa.com/registration
References
- Kraus | Kitchen and Bathroom | Sinks, Faucets, and Accessories
- Care & Maintenance | Well-crafted products | Light maintenance.
- Kraus USA Self Help
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>