JBL Club Pro+ TWS True Wireless Noise Cancelling Earbuds User Guide
- June 6, 2024
- JBL
Table of Contents
- JBL Club Pro+ TWS True Wireless Noise Cancelling Earbuds
- WHAT’S IN THE BOX
- APP
- First-time use
- Power on & CONNECT
- how to wear
- power off
- DUAL CONNECT + SYNC
- BUTTON COMMAND
- MANUAL CONTROLS
- DO MORE WITH THE APP
- Charging
- led behaviors
- TECH SPEC
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
JBL Club Pro+ TWS True Wireless Noise Cancelling Earbuds
WHAT’S IN THE BOX
APP
First-time use
Power on & CONNECT
how to wear
power off
DUAL CONNECT + SYNC
BUTTON COMMAND
- Enable advance controls by connecting your JBL CLUB PRO+TWS to My JBL Headphones App .
** ENABLE YOUR VOICE ASSISTANT THROUGH MY JBL HEADPHONES APP AND ASSIGN IT TO YOUR PREFERRED EARBUD (L/R).
MANUAL CONTROLS
DO MORE WITH THE APP
Charging
led behaviors
TECH SPEC
- Model: CLUB PRO+ TWS
- Driver Size: 6.8 mm/0.27″ Dynamic Driver
- Power supply: 5 V 1 A
- Earpiece: 6.85 g per pc (13.7 g combined)/0.015 lbs per pc (0.03 lbs combined)
- Charging case: 55.4 g/0.12 lbs
- Headset battery type: Lithium-ion polymer (3.7 V, 55 mAh)
- Charging case battery type: Lithium-ion polymer (3.7 V, 660 mAh)
- Charging time (USB-C): 2 hrs from empty
- Music playtime with BT on and ANC off: up to 8 hrs
- Music playtime with BT on and ANC on: up to 6 hrs
- Frequency Response: 10 Hz – 20 kHz
- Impedance: 16 ohm
- Sensitivity: 102 dB SPL@1kHz/1mW
- Maximum SPL: 99 dB SPL
- Microphone sensitivity: -6 dBV@1kHz/Pa
- Bluetooth version: 5.1
- Bluetooth profile version: A2DP V1.3, AVRCP V1.6, HFP V1.7
- Bluetooth transmitter frequency range: 2400 – 2483.5 MHz
- Bluetooth transmitter power: < 9.5 dBm (EIRP)
- Bluetooth transmitter modulation: GFSK, /4 DQPSK, 8DPSK
- Maximum operation temperature: 45°C
TO PROLONG BATTERY LIFESPAN, FULLY CHARGE AT LEAST ONCE EVERY 3 MONTHS. BATTERY LIFE VARIES BY USE AND SETTINGS.
IC RF Exposure Information and Statement
This equipment complies with ISED radiation exposure limits set forth for an
uncontrolled environment. End user must follow the specific operating
instructions for satisfying RF exposure compliance.
This transmitter must not be co-located or operating in conjunction with any
other antenna or transmitter.
The portable device is designed to meet the requirements for exposure to radio
waves established by the ISED. These requirements set a SAR limit of 1.6 W/kg
averaged over one gram of tissue. The highest SAR value reported under this
standard during product certification for use when properly worn on the head.
Warning:
- DO NOT ATTEMPT TO OPEN, SERVICE, OR DISASSEMBLE THE BATTERY
- DO NOT SHORT CIRCUIT
- MAY EXPLODE IF DISPOSED OF IN FIRE
- RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE
- DISPOSE OR RECYCLE USED BATTERIES ACCORDING TO THE INSTRUCTIONS
Google, Android and Google Play are trademarks of Google LLC.
Amazon, Alexa, Amazon Music, and all related logos are trademarks of Amazon,
Inc. or its affiliates.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>