G SKILL ENKI 360 AIO Internal Cooler User Guide
- June 6, 2024
- G SKILL
Table of Contents
G SKILL ENKI 360 AIO Internal Cooler User Guide
Product Specifications
Product Name| ENKI 360
Part Number| GW-DTNL9A1P-A360XG1
Pump & Water Block
Dimensions (LxWxH)| 5.7 x 5.7 x 3.9cm
Material| Copper, Plastic
Pump Speed| 5000RPM
Radiator
Dimensions (LxWxH)| 39.4 x 12.0 x 2.7cm
Material| Aluminum
Tubing
Length| 420mm
Material| Ultra-Low Evaporation Rubber w/ Nylon Braided Sleeve
Fan
Dimensions (LxWxH)| 120 x 120 x 25mm
Speed| 2100±10% RPM
Airflow| 23.6~93.5 CFM
Air Pressure| 0.2~1.86 mmH2O
Noise| 15.3~29.6 dBA
Power Consumption| DC 12V, 0.23A, 2.76W
Rated Lifetime| 6 Years
Bearing| Hydro Bearing
Connector| 4-Pin PWM
Socket Compatibility
Intel Socket 1200, 115x, 1366, 2011, 2011-3, 2066 AMD Socket AM4, AM3+, AM3,
AM2, FM2+, FM2, FM1
Warranty
5 Year Limited Warranty
Product Required
Assembly Instructions
-
Intel LGA 1200 / 115x / 1366 – Base Assembly
-
Intel LGA 2066 / 2011 / 2011v3 Socket – Base Assembly
Note: Choose the alignment of the mounting bars depending on the desired cooler orientation.
-
AMD AM4, AM3+, AM3 Socket – Base Assembly
Note: Remove the two AMD top brackets. Keep the stock back plate.
-
AMD TR4 Socket – Base Assembly
-
Cooler Assembly
-
Fan Installation
-
**Case Assembly
**
Technical Support
International: techsupport@gskill.com
North/South America: ustech@gskillusa.com
Europe: eurotech@gskill.com
Copyright © 2020 G.SKILL International Enterprise Co., Ltd. All rights reserved. G.SKILL logo is a registered trademark in the United States and/or other countries. All other trademarks are the property of their respective Ver.109.1112 owners.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>