boAt Stone 1200 14W Bluetooth Speaker User Manual
- June 6, 2024
- Boat
Table of Contents
KEEP ROLLIN!
STONE 1200
MANUAL SETUP GUIDE
Bluetooth Connectivity:
1: Turn the speaker on and its LED indicator will blink white in color until
the paring is done.
2: Activate the phone’s Bluetooth function and search for “Stone 1200”. As
soon as the speaker has been selected by you and paired, there will be a sound
prompt indicating paring and the white LED will turn steady.
NOTE:
• The speaker can automatically reconnect to the last paired device.
• The speaker gets automatically turned off if there’s no paring for 10
minutes.
**Disconnecting the Speaker:
**
• For disconnecting the Bluetooth connection, long-press TWS “ ” button.
TWS Connection:
- Turn the speakers on that you require to be forged into one, both under Bluetooth mode. Only need to set one of the two units.
- Long press TWS “ ” button till you hear a sound prompt, then start to pair.
- A tone will be audible again with the white LED turning steady, it may take a few seconds before the two speakers connect
- Activate phone’s Bluetooth and search for ‘Stone 1200’ to establish a pairing
NOTE: Once two units execute TWS function, they will be automatically paired again if next time they are turned on within
effective range.
Disconnecting TWS :
• Short press TWS “ ” button for stopping the TWS function
• Long press TWS “ ” button for disconnecting both TWS and
Bluetooth connectivity.
FM Radio:
- Short press the Mode “ ” button to switch to FM mode.
- Under radio mode, Long press Play/Pause“ ” button to auto search the FM Channel and it stores automatically.
- Short-press Play/Pause“ ” button to mute the speaker.
USB Reader Mode
To play songs in USB mode, you may plug the USB Flash Drive into the USB jack provided on the speaker. It will automatically switch to USB mode.
Package Contents
- 1x Portable Wireless Speaker
- 1x Type-C Cable
- 1x Aux-in Cable
- 1x User Manual
- 1x Catalogue
- 1x Warranty Card
- 1x Shoulder Strap
Charging:
- Connect one end of the provided charging cable to the charging input and the other end to an adaptor of DC 5V/2A.
- During charging, you could check to charge status from the 4 LED white color charging indicators:
≥25%, 1st LED keeps solid, second light flickers, and 3rd and 4th lights stay
of;
≥50%, 1st and 2nd LED keep solid, 3rd light flickers, 4th lights stay of;
≥75%, 1st and 2nd and 3rd LED keep solid, 4th light flickers; At Charging
100%, all 4 LEDs stay solid.
Note:
- Please don’t use the speaker while it is in charging as it may decrease the battery’s performance.
- The unit does not have a power bank function, the USB port is only for music playback. It’s forbidden to charge other devices via this unit or to connect another device via a USB cable.
Product Overview
1. Power On/Of 2. TWS Button 3. Play/Pause 4. Forward/Volume Up 5. Battery Indicator 6. Backward/ Volume Down 7. Mode Button 8. Voice Assistant Button 9. USB Type C Charging Interface 10. USB Port 11. AUX Port 12. RESET Jack
Troubleshooting
A.
• Question: The device cannot and “Stone 1200” on Bluetooth?
• Reason: The speaker may not be in pairing mode.
• Solution: Restart the speaker to search again.
B.
• Question: The speaker is taking very long to charge?
• Reason: The adapter’s power output is too low, and the charging cable’s
consumption is too high.
• Solution: Please choose the adapter with an output that is not less than DC
5V/2A and use the original charging cable.
Basic Functions
Items
| Instructions|
LED status
---|---|---
Power On| Long press the Power button for 3 seconds| Blue LED flashes
Power Off| Long press the Power button for 3 seconds| Blue LED Turns Off
Pairing| Auto Pairing Mode| Blue LED starts flashing
Successful pairing| Select Stone 1200| Blue LED stays steady
Disconnect| long press TWS “ ” button| Blue LED starts flashing
Receive a call| Short press the Play/Pause ‘ ’ button to receive incoming
calls|
/
Reject the call| Long press the Play/Pause ‘ ’ button for rejecting incoming calls|
/
Hang up the call| Short press the Play/Pause ‘ ’ button to hang up an ongoing call|
/
Switch Calls between Speaker and Phone| Long press the Play/Pause ‘ ’ button during the call for 2 seconds|
/
Specifications
| Bluetooth Version: | V5.0 BR |
|---|---|
| Net Weight: | 1740g |
| Working Range: | 12m |
| Driver Size: | 76mm*2 |
| Supported Profiles: | A2DP, AVRCP, HFP |
| Water Resistance Level: | IPX7 |
| Frequency: | 100Hz-20kHz |
| Input Voltage: | DC 5V/2A |
| Output Power: | 14W |
| Charging Time: | Around 4 hours |
| Playing Time: | Up to 9 hours without RGB LED Up to 7 hours with RGB LED |
(Playtime may vary according to the volume)
Battery:| 3.7V / 3600mAh
Items| Instructions|
LED status
---|---|---
Voice Assistant| Short press the Voice Assistant button ‘ ’|
Volume Up| Short press the Volume Up ‘ ’ button in steps|
/
Volume Down| Short press the Volume Down ‘ ’ button in steps|
/
Next track| Long press the Volume Up ‘ + ’ button|
/
Previous Track| Long press the Volume Down ‘ – ’ button.|
/
Play/Pause| Short press the Play/Pause ‘ ’ button.|
/
Switch Modes| Short press the Mode button ‘ ’ to switch among playing
modes: Bluetooth / FM Radio / USB / AUX
|
/
RGB Light| Long press the Mode button ‘ ’ to switch the RGB light ON or OFF|
/
Reset| Insert pointed insulated object (e.g.- toothpick) into the Reset jack
NOTE: If the speaker doesn’t turn off or doesn’t respond, you could use the Reset functionality.
| LED turns off
Safety Precautions
- Please note that the battery life of the speaker varies with the volume of music is being played. If at a lower volume, the battery life will be longer than when the speakers are playing at full volume
- If the speaker requires cleaning please ensure that it is done with the utmost care. Furthermore, make sure it is turned off and disconnected from all Bluetooth devices. Do not use alcohol, benzene, and other chemicals to clean the speaker. Do not allow the speaker within range of extremely hot or cold substances.
- Try to ensure that no physical damage comes to the speaker via falling, or coming into contact with hard surfaces or sharp edges.
- Do not dismantle the speaker r handle the battery in any way. If any issue arises with the speaker, please enlist the aid of a manufacturer. The battery must not be handled or replaced as when it can result in explosions or are hazards. Therefore, please ensure that any servicing of the speaker is done through the service provider or manufacturer.
- If the speaker gets wet, please ensure that it is dried quickly and completely after coming into contact with water. Please do not allow the speaker to be submerged into the water at any cost.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>