REXING V5 Plus 3-Channel 4K Dash Cam User Guide

: June 6, 2024
: Rexing

Table of Contents

Overview
What’s in the box?
Camera Overview
Installation
Basic Operation
Warranty & Support
Documents / Resources
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)

V5 Plus
Quick Start Guide

The information in this manual is subject to change without notice.
Rexing All Rights Reserved
www.rexingusa.com

Overview

Thank you for choosing RACING!
We hope you love your new products as much as we do. If you need assistance or have any suggestions to improve it, please contact us.

care@rexingusa.com
877-740-8004
Our support team will respond to you as soon as possible.
Always a surprise in Rexing.

Check us out here

Facebook

|

Instagram

---|---
https://www.facebook.com/rexingusa/| https://www.instagram.com/rexingdashcam/

Site

|

Product Suppor

https://www.rexingusa.com/support/registration/| https://www.rexingusa.com/support/

What’s in the box?

1. Rexing V5 Plus Dash Cam
2. Rexing V5 Rear Camera with Extension Cable (20ft)
3. In-Car Power Cable (12ft)
4. 3M Adhesive Mount| 5. USB Cable
6. Cable Management Tool
7. Quick Start Guide
8. Safety Guide
---|---

Camera Overview

1. Power Button / Screen Toggle Button
2. Menu Button / Mode Button
3. Up Navigation Button / Emergency Lock Button
4. Down Navigation Button
5. OK (Confirm) Button / Record Button| 6. USB Charging Port
7. Micro SD Card Slot
8. Rear Camera Port
9. Cabin-facing camera
---|---

Screen Icons

Installation

Step 1
Install the Dash Cam
Place the 3M tape on the mount and properly orient the mount straight to the roof and hood line of the vehicle.
Important! Ensure the T-interlock on the mount is oriented in the correct direction.
Firmly press the Mount onto the windshield. Wait at least 20 minutes before mounting the camera.
On the illustration orient the mount as shown.

Step 2
Insert the Memory Card
The Rexing V5 Plus accepts [Class 10/UHS-1 or higher] Micro SD memory cards up to 256GB. You will need to insert a memory card before you can begin recording.
Before inserting or removing a memory card, first ensure you’ve powered down the device. Gently push the memory card in until you hear a click, and allow the spring release to push the card out.

Step 3
Power on the Camera and Format the Memory Card
Power on the camera by connecting the charger to the car cigarette lighter and camera. To ensure the V5 Plus records to your memory card properly and without error. Before you start using a new memory card, you must format the card within the camera using the format function. Always back up important data stored on the memory card before formatting.
To format the memory card, make sure you have inserted your memory card, then turn on the device by connecting to a power source. Press OK to stop recording. Then press the MENU button twice to enter the System Setup Menu. Use the and buttons and toggle to the Format setting. Press the OK button to confirm the selection.
You may now disconnect from power. The camera will shut down after 3 seconds.
The camera should begin recording automatically the next time it is powered on.

Step 4
Mount the Rear Camera
Mount the rear camera as shown below. Use a rear camera cable to connect the rear camera to the V5 Plus camera.

Step 5
Installing the Camera onto the Windshield
Place the camera on the mount and carefully route the power cable around the windscreen and tuck in under the trim.
Plug the Car Charger Cable into a 12V DC power outlet or the car cigarette lighter.
Connect car charger to the camera. The camera will auto-start the recording once powered on.

Basic Operation

Device Power
The device is automatically powered on when plugged into a 12V accessory socket or cigarette lighter and received a charge (i.e.: the vehicle is started).
To turn the device on manually, press and hold the Power button until the welcome screen appears.
The camera will automatically start recording when the power is on.

Menu Settings
Power the camera On. If the camera is recording, press the OK button to stop recording.
Hold the MENU button and toggle to the desired mode. Press the MENU button once to enter the settings menu for a Mode. Press the MENU button twice to enter the System Settings (Set up).

Video Recording
The camera will automatically start recording when the device receives a charge.
The LED lights and red dot will blink the device when recording. Press the OK button to stop recording.

EMR Mode
To use the Emergency Record Mode, hold the button to manually record a 20-second video that is automatically saved and locked.
View EMR recordings by pressing the menu/playback button.

Video Playback
Playback of videos can be done on the device or a computer. To playback, a video on the device, toggle to the Playback mode. Use the and buttons to toggle to the desired video. Press the OK button to play.
During playback use the OK (pause), (rewind), and (fast forward) buttons to control the video playback.
To playback, a video on the computer, either use an SD card adapter or connect the device to the computer directly using the USB cable.
To playback, a video using an SD card adapter, remove the memory card and insert it into an SD card adapter. Place the adapter in the computer.

To playback, a video using a USB cable, connect the USB cable to the device and the computer. After the device powers up, press the OK Button to select Mass Storage.
On the computer, navigate to the device drivers. The videos are stored at: \CARDV\MOVIE.
Select the video to playback.

Wi-Fi Connect
Download the Rexing Connect app from the App Store/Google Play Store.

To access and exit the app, hold down the OK Button
Open Wi-Fi settings on your phone, find “SSID” from the list, tap to connect.
(Default password: 12345678)
Open the Rexing Connect app, tap “Connect” to enter the real-time video streaming page.
Once connected, the dashcam screen will switch to the camera view and will display a “WiFi Connected” message. Using the Rexing Connect app, you can view a live preview of the dashcam screen, start/stop recording, as well as view and save your captures with your mobile device.
For further instruction regarding the Wi-Fi Connect feature, please visit www.rexingusa.com/wifi-connect/.

GPS Logger
You can then access this information while playing back your recordings using the GPS Video player (For Windows and Mac, available at rexingusa.com).
The dashcam will automatically search for the GPS signal once it’s connected to the power source. Press the MENU button twice and go to System Settings. Toggle the GPS Speed Unit setting, and select your favorite speed unit.
After a GPS signal is found, the screen icon will turn from red to green as per the below icons. It will record the speed and location of your vehicle as you drive.

0.00km/h	GPS function active
0.00km/h	GPS Signal (not connected)

Parking Monitor
Connect the dashcam to the Smart Hardwire Kit (need to purchase separately) to activate the parking monitor function. Please visit support.rexingusa.com to watch a video tutorial.

Taking Photos
To take a photo, stop video recording and hold down the button.
To view a photo, stop video recording and hold on the MENU button to the Playback Mode.
Press the and buttons to toggle through your photos.
To delete a photo, stop video recording and toggle to the Playback Mode and toggle through the videos and photos to the one you want to delete.
Press the MENU to toggle the Delete option.
Press the OK Button and select Delete Current or Delete All.

Warranty & Support

Warranty
The Rexing V5 Plus Dash Cam comes with a full 12-month warranty. If you register your product on our official site (https://www.rexingusa.com/support/registration), you can extend the warranty to 18 months.

Support
If you have any questions regarding your product, please do not hesitate to contact us at care@rexingusa.com, or call us at 877-740-8004. Queries are typically answered within 12-24 hours.

Your opinion matters
Rexing is firmly committed to always improving our products, services, and user experience. If you have any thoughts on how we can do even better, we welcome your constructive feedback and suggestions.
Connect with us today at care@rexingusa.com

Thank you for choosing Racing!

FCC ID: 2AW5W-V5C
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment.

MADE IN CHINA