rapoo M600 Mini Silent Multi-Mode Wireless Mouse User Guide
- June 6, 2024
- rapoo
Table of Contents
Quick Start Guide
Multi-mode Wireless Mouse
M600 Silent/ M600mini Silent
Bluetooth mode
A. Pair your first device
a1. Turn on the mouse.
a2. Keep pressing the Bluetooth button at least 3 seconds to pair. The
status LED flashes red slowly. The mouse is discoverable for2 minutes.
a3. Complete Bluetooth pairing on your device as follows. When the mouse
and your device are paired, the light turns off.
B. Pair your second device.
b1. Press the Bluetooth button to switch to another channel.
b2. Follow steps 2 and 3 of “Pair your first device” to connect your
second device.
Windows@7 and 8:
-
Click the “Start” button, then select Control Panel> Add a device.
-
Select “RAPOO3.0 MS” or “RAPOOS.0 MS” from the list, then click Next.
Windows®10: -
Click the “Start” button, then select Settings> Devices> Bluetooth.
-
Select “RAPOO 3.0 MS” Or “RAPOO5.0 MS” from the list, then click Pair.
Switch among paired devices
Press the Bluetooth button to switch among up to 3 paired devices. The mouse connects up to 2 devices via Bluetooth and 1 via a 2.4 GHz receiver.
Status LED
When you pick up the mouse
If the red light turns stable for 6 seconds, Bluetooth device 1 is paired. If
the red light flashes slowly, Bluetooth device 2 is paired. If the light is
off, the 2.4 GHz device is paired.
Low battery
Red light rapidly flashes twice every two seconds when you use the mouse.
Package contents
System requirements
Windows®XP /Vista/ 7 / 8 / 10 or later, USB port
Warranty
The device is provided with a two-year limited hardware warranty from the purchase day. Please see www.rapoo.com for more information.
Declaration of Conformity
We, the manufacturer
Shenzhen RapooTechnologyCo., Ltd
Fax:+86-0755-28588555| Declare that the product
Product Name: Multi-mode Wireless Mouse
Model No : M600 Silent / M600mini Silent
---|---
Complies with the following norms:
EN 300 328 V2.1.1 (2016-11)
EN 50663: 2017
EN 301 489-1 V2.2.0
EN 301 489-17 V3.2.0
EN 62368-1:2014+A11:2017| The product is in compliance with the essential
requirements of Radio Equipment Directive 2014/53/EU, and the Ro HS Directive
2011/65/EU.
Manufacturer/Authorised representative
Minkun Deng,EMCEngineer
R&DDepartment Dateoflssue: Jul.14,2021
FCC Statement
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
To assure continued compliance, any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment. (Example- use only shielded interface cables when connecting to computer or peripheral devices).
FCC Radiation Exposure Statement
This equipment complies with FCC RF radiation exposure limits set forth for an
uncontrolled environment. This transmitter must not be co-located or operating
in conjunction with any other antenna or transmitter.
This equipment complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions:
- This device may not cause harmful interference, and
- This device must accept any interference received, including interference that may cause undesired operation.
Caution!
The manufacturer is not responsible for any radio or TV interference caused by
unauthorized modifications to this equipment. Such modifications could void
the user’s authority to operate the equipment.
Radio Equipment Directive 2D14/53/EU:
Frequency Bands: 2402-2480MHz
Maximum Radio Frequency Power Transmitted: 3.48 mW EIRP
IC RSS warning
This device complies with Industry Canada licence-exempt RSS standard (s).
Operation is subject to the following two conditions:
(1) this device may not cause interference, and
(2) this device must accept any interference, including interference that may
cause undesired operation of the device.
IC Radiation Exposure Statement:
This equipment complies with IC RF radiation exposure limits set forth for an
uncontrolled environment. This transmitter must not be co-located or operating
in conjunction with any other antenna or transmitter.
Any changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
[ti forbidder to repr duce any part the quick start guide out the permission
of Shenzhen Rapoo Technology Co. Ltd
It is forbidden to reproduce any part of this quick start guide without the
permission of Shenzhen Rapoo Technology Co., Ltd.
Made in China
Documents / Resources
|
rapoo M600 Mini Silent Multi-Mode Wireless
Mouse
[pdf] User Guide
M600 Silent, M600mini Silent, M600 Mini Silent Multi-Mode Wireless Mouse,
Multi-Mode Wireless Mouse, Wireless Mouse, Mouse
---|---