FlashFish G300 Portable Power Station User Manual

June 6, 2024
FlashFish

FlashFish G300 Portable Power Station User Manual

FlashFish G300 Portable Power Station

ATTENTION

The specifications and the pictures in this manual are for reference only. The product is only used for emergency situations, it cannot replace the standard AC power for household appliances or digital products. Actual AC outlet and AC adapter would be different depending on the locations of customer.

Thank you for choosing G300 Portable Solar Generator.
The purpose of this manual is to help you use the product correctly. Please read the manual carefully and follow the guidance.

Product Overview

Left overview

FIG 1 Product Overview

  1.  DC Power Button
  2. LCD Display
  3.  5.5mm DC Output (12V/10A)
  4. USB Output Port (QC3.0)
  5. USB Output Port (5V/2.4A)

Right overview

FIG 2 Product Overview

  1. AC Power Swith (Press “I” tum ON Press “O” turn OFF)
  2. 5.5mm DC Input Port& Solar Input Port
  3. AC Outlet

Operation Guidance

1) How to charge with the DC output ports of this product?Connect your DC 12V appliances with the 5.5mm 12V DC output port. And your appliances would be charged automatically.
* Note: Please check to make sure that your 12V DC appliance supports charging with the DC port of this product, which is 5.5mm in diameter. You could confirm it with the manufacturer or seller of your 12V DC applianc­es.

FIG 3 Operation Guidance

Note: The DC output range of this power station is 9V-12V. The max output current is 10A. The DC voltage would drop as battery capacity decreases over time. If your appliance does not have built-in input voltage stabilizing function, it may power off due to low voltage. Please remove your appliance and charge the product in time.

Protection Mode (DC Output):
Short-circuit/Over power Protection: If the DC output is short-circuited or overpowered (Load(s) power>350W), the product will shutdown to protect itself. Please disconnect the 12V appliances from the product and recharge the product. This could help restore the product.

2) How to charge with the AC outlet of this product?
Connect the power cable plug of the AC electrical appliance to the AC outlet of the product. Press the AC power switch to “I’ position and the product will start providing power to your appliances. Please make sure that the power of the AC appliance is less than 300W.

FIG 4 Operation Guidance

* Note: When the AC port is not in use, turn off the AC power button to conserve power.

Protection Mode (AC Output):
Short-circuit/OVerpower Protection: If the AC output is short-circuited or overpowered (load(s) power>350W), the product will shutdown AC output to protect itself. Please charge this product and re-press the AC button for AC output.

Some electronic devices, such as refrigerator, ice maker or a laser printer may require a surge power to start or work. The surge power could exceed350W, which could cause overpower protection. Please disconnect the devices and consult with the device manufacturers for more information.

3) How to charge with the USB ports of this product?
Connect the standard USB cable of your digital devices to the USB output ports of the product. Press the DC POWER button the product will start providing power. If the USB port fail to supply power to the digital device, press the AC power output button to trigger USB power output.

Please switch off the AC power output to save power when your digital devices are fully charged.

FIG 5 Operation Guidance

4) How to charge the product?
A. Charge through AC wall charger Connect the power adapter which come with the product to any wall outlet. The LCD screen appears ‘Charging” indicate that the product is being charged.

FIG 6 How to charge the product

The product is fully charged when the battery icon on the LCD screen stop flashing and appear “Fully Charged”. After the product is fully charged, please unplug the AC wall charger in time.

FIG 7 How to charge the product

B. Charge through solar panel

  1. Place your solar panel where it will get as much strong direct sunlight as possible.
  2. Connect the output port of the solar panel with the input port of the product to start charging. When the battery icon on the LCD screen is flashing and appear “Charging” , the product is being charged normally. When the battery icon on the LCD screen stop flashing , it will appear “Fully Charged” to indicate that the product is fully charged .

FIG 8 Charge through solar panel

Note: Actual charging efficiency can vary widely depending on weather, temperature, battery state of charge, and other factors.

C. Charge through the cigarette lighter receptacle of your 12V car Using the car charger, plug the product into the 12V cigarette lighter receptacle of your car. You will know the product is charging when the battery icon on the LCD screen is flashing and appear “Charging”. The product is fully charged when the battery icon on the LCD screen stop flashing and appear “Fully Charged”.

Attention: To avoid car battery power loss, you should charge this product through your car cigarette lighter only when your car engine is started. This function is for 12V car ONLY.

Cautions

  1. Do not short-circuit the product To avoid short-circuiting, keep the product away from all metal objects (e.g. coins, hair-pins, keys, etc.}.
  2. Do not heat the product, or dispose it in fire, water or other liquids. Keep it away from high ambient temperature. Do not expose the product to direct sunlight.
  3. Keep the product away from humid, dusty places.
  4. Do not disassemble or reassemble this product.
  5. Do not drop, place heavy objects on, or allow strong impact to this product
  6. This product is not intended to be used by persons with reduced physical, sensory or mental capabilities.
  7. Please keep this product away from children.
  8. Do not cover the product with towels, clothing and other item.
  9. Do not over charge this product.
  10. When fully charged, disconnect the product from the power source immediately.
  11. Please double check the total power of your await for charging devices before use this product.Make sure not exceed the rated power of this power station.

Product Application Tips

  1. It is recommended to use this product when the ambient temperature falls within -10″C -40″C, so as to obtain the optimal charging capacity.
  2. When charging this product, please keep it away from N, radio and other equipment to avoid radio wave interference.
  3. If you are not going to use this product for a long time, please disconnect the cable before storing it away.
  4. To charge some portable electronic devices, you may need to set those devices in charge mode first Refer the corresponding user manual of those devices for confirmation.
  5. In order to extend the life of product {lithium battery), it is best to charge it once every 3 months, or at least charge it once every 6 months.

Cold Weather Usage

Cold temperatures {below freezing) can affect the product’s battery capacity due to chemical characteristics of the battery, If you’ll be living off grid in sub-zero conditions, it is recommended to keep your product in an insulated cooler, and connected to a power source (solar panels). The natural heat generated by the product contained in an insulated cooler will keep battery capacity at its highest

Disposal and Recycle

This product should not be disposed along with household waste. Please dispose or recycle this product and the battery inside according to the local rules and regulations.

Battery Information
This product has an internal, non-removable, rechargeable battery. Do not attempt ta remove the battery, as this may cause serious injury to you or damage to the device.

Pure Sine Wave Output
This product generates pure sine wave, which is compatible with AC electric appliance that works with Sinusoidal waveform (power <300W), However, the product is only used for emergency situations, It cannot replace the standard DC or AC power supply for household appliances or digital products. Electronic appliances that use an AC motor isn’t going to work ta its full capacity on a pure sine wave and noises may sound as a result For long-term use, appliances like refrigerators, microwaves, and compressors that use AC motors and some delicate medical equipment will be better off with the standard DC or AC power supply.

Product Specifications

FIG 9 Product Specifications

FIG 10 Product Specifications

Package Contents

  • 1 x Portable Solar Generator
  • 1 x Power Adapter
  • 1 x American standard line
  • 1 x Cigarette Lighter Adapter
  • 1 x Car Charger
  • 1 x User Manual

Warranty

Our company provides customers with warranty of i 2 months from the date of purchase.

Email: info@flashfishtech.com
For more promotions, discount, coupons, activities or technical support, after-sales please feel free to contact us Flashfish Team:

Website: www.flashfishtech.com (more contact info could be found on our website )

FIG 12 Product Compliance

MADE IN CHINA

Read More About This Manual & Download PDF:

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals