Lumens VC-TR1 Full HD Auto-Tracking Camera Installation Guide
- June 6, 2024
- Lumens
Table of Contents
Lumens VC-TR1 Full HD Auto-Tracking Camera Installation Guide
Before Starting
- Get the VC-TR1 camera in place.
- Download & install the Lumens CMS software with https://www.MyLumens.com/CMS
- VC-TR1/PC/LC200, every equipment needs to use the same network.
Installation
- Accessory DC 12V or PoE+(IEEE802.3at) for power supply.
- Default Resolution is 1080P, you can change it by CMS or another button feature.
- The VC-TR1 trace-range limitation is 4~15m, suggested range is 8m.
- The installation height limitation is 2~3m, suggested height is 2.4m.
One button for Auto-Tracking
- Turn on the VC-TR1 camera.
- Let a person stand 4-15 meters in front of the camera.
- Press the remote “F1”button to start auto-tracking.
Advance Settings
-
Before setting up, please first press the F2 button on the remote control to turn off the auto-tracking.
-
Start software.
-
Wait for 5-7 seconds. The VC-TR1 will appear on the device list -> Twice click on the device, you will see the live view instantly.
Manually Add devices : Go to the device list. Click the Device Manager and follow steps 1 to 5. -
Presenter Frame
If you want more “close-up”view of your presenter, you need to set the
presenter frame.
Click [Presenter Frame] and adjust Pan-Tilt-Zoom, and set it to preset
We advice the presenter’s face shall be in the yellow auxiliary frame.
-
Stage Frame
When there is no presenter to track, the view will automatically go back to the stage frame.
Click [Stage Frame] and adjust Pan-Tilt-Zoom, and set it to preset
We suggest users set the entire stage view
-
Tracking Area
This is the user-defined zone that represents the tracking enabled area.
Click [Settings] and then [Tracking area] -> Click and hold down the left mouse button and drag to draw a tracking area -> Click [Save] -> Click [Return] then back to Live view.
-
Blocked Area
This is used to shield a moving object that may have impacts on tracking accuracy.
Select one block area -> Click and hold the left mouse button and drag to draw a tracking area -> Click [Save] -> Click [Return] then back to Live view.
-
Click [Start] to start auto-tracking.