niceboy HIVE PINS 2 ANC Bluetooth Earphones User Manual

HIVE PINS 2 ANC
Bluetooth Earphones
User Manual

PRODUCT DESCRIPTION

1. LED
2. Multifunction button
3. Charging pins
4. LED charging indicator
5. USB-C charging port

FIRST START-UP AND PAIRING

1. Remove both earphones from the charging box and remove the stickers protecting the charging pins (3) on the earphones.
2. Switch the earphones on by pressing and holding the multifunction button (2) on both earphones.
3. The earphones will switch on and pair with each other. When the LED (1) starts flashing white and orange, the earphones are ready to connect to Bluetooth.
4. Open the Bluetooth settings on your device and search for „Nocebo HIVE Pins 2 ANC“ on the list of available devices.
5. Successful pairing is announced by an acoustic prompt and the LED (1) will start flashing white at long intervals.

When reconnecting to a device that has already been paired, simply remove the earphones from the box. They will switch on and connect to the device automatically.
SWITCHING ON AND OFF:
To switch the earphones on, simply remove them from the charging box, or manually switch them on by pressing and holding both multifunction buttons.
To switch them off, simply insert the earphones into the charging box. They will turn themselves off and disconnect from your device. The earphones are stored correctly in the box when the LED (1) turns orange. When the earphones are fully charged, the LED goes out. To switch the earphones off, press and hold both multifunction buttons (2) for approx. 12 seconds.

MULTIFUNCTION BUTTON – BASIC OPERATION

Press any button once – play/pause, answer/hang up
Press and hold any button for 2 seconds – change mode in the following order: ANC on / Ambient / ANC off, reject call
Press the right button twice – next song
Press the left button twice – previous song
Press any button three times – activate Siri / Google Assistant
VOLUME CONTROL:
You can adjust the volume level via your paired device, or by using voice assistants if your device supports voice assisted volume control.
CHARGING:
To charge the box itself, connect the charging cable to the USB-C port (5). During charging, the LED indicators (4) will start flashing; when fully charged they will turn light blue.
ANC AND AMBIENT MODES:
ANC (Active Noise Canceling) is a function that eliminates ambient noise by sending the sound of the same wave length, just in an opposite frequency phase, to collide with the incoming sound. When these two waves connect, they cancel each other out.
In Ambient mode, the headphones pick up and amplify sounds from the surroundings, which is especially handy when traversing the city or in traffic, for safety reasons.
To switch between the individual modes, press and hold (approx. 2 seconds). An acoustic prompt will announce a mode change.
FACTORY SETTINGS:
In case of technical problems, reset the earphones to the factory settings as follows:

1. Remove the earphones from the Bluetooth list on your device.
2. Remove the earphones from the charging box.
3. Switch both earphones off by pressing and holding the multifunction buttons (2) for approx. 12 seconds.
4. Press and hold the multifunction buttons to switch both earphones on.
5. Press both multifunction buttons four times simultaneously – the earphones will switch off.
6. Insert both earphones into the charging box and wait until both LEDs (1) turn orange.
7. Remove the earphones from the box. They will switch themselves on and pair with each other.
8. The process is now finished and you can pair the earphones with your device again.

SPECIFICATIONS

PACKAGE CONTENTS:
Niceboy HIVE Pins 2 ANC earphones
Charging box
Spare earbuds
USB-C cable
Manual

This product meets all basic EU regulation requirements placed upon it.

Importer to EU: RTB media s.r.o., Pretlucka 16,
Prague 10, 100 00, Czech Republic, ID: 294 16 876
Made in China.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>