niceboy ION Strip Smart Lights User Manual

: June 1, 2024
: niceboy

Table of Contents

niceboy ION Strip Smart Lights
Product Information
PACKAGE CONTENTS
CONNECTING TO THE APPLICATION
SPECIFICATIONS
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

niceboy ION Strip Smart Lights

niceboy-ION-Strip-Smart-Lights-product

Product Information

Specifications

Model: SmartStrip LED
Type of light source: Wi-Fi
Wireless protocol: 2412-2472 MHz, max. transmission power 19.38 dBm
Color scale: RGB+CCT
Chromaticity: 2700-6500 K
Power consumption when switched on: N/A
Dimmable: Yes
Operating temperature: N/A
Operating humidity: N/A
Certification: Niceboy sro declares compliance with directives 2014/53/EU, 2014/30/EU, 2014/35/EU, and 2011/65/EU
Wireless controller battery: N/A
Input voltage: 220V-240V ~ 50/60 Hz
Control unit input voltage: 12V ~ 2A
Length: 5m
Lifespan: 25,000 hours
Application: Niceboy ION

Frequently Asked Questions

Q: What should I do if the LED strip is not lighting up?
- A: Check the power source and ensure the LED strip is securely connected to the control unit. You may also need to check the app settings for any issues.
Q: Can I cut the LED strip to adjust its length?
- A: Cutting the LED strip may damage it and void the warranty. It is recommended to use the strip at its original length.
Q: How do I change the color of the LED lights?
- A: Use the color controls within the “Niceboy ION” app to customize and change the colors of the LED lights according to your preference.

PACKAGE CONTENTS

SmartStrip
Manual
Power adapter
Remote control
Control unit

CONNECTING TO THE APPLICATION

Download the app by scanning the QR code with your mobile phone or search for „Niceboy ION“ on the mobile app market to download the app.
Open the „Niceboy ION“ app and register a new account or use an existing account.
Connect the LED strip to the control unit. When connecting the LED strip with the control unit, pay attention to the correct connection – there are arrows on both cables that show the correct connection point of both cables.
Then connect the power adapter to the control unit.
Connect the power adapter to the socket, the LED strips will start flashing.
If the LED strip does not start flashing, unplug it, wait 5 seconds and plug it in again.
Once the device is in pairing mode, click the „+“ icon in the upper right corner and then choose „Add Device“.
Switch to “Autoscan” and select Niceboy ION SmartStrip ”. If the auto scan does not find the bulb, select „Lighting“ in the manual settings and connect to the „ Niceboy ION SmartStrip „.
Make sure you know the name of your home WiFi, enter the WiFi password and click „Next“ (note: only 2.4G WiFi connection is available)

WARNING

This product is not a toy. Do not leave the device within the reach of children.
This product is intended for use in a covered household environment only. Do not use it in an environment that has higher/lower temperatures than the operating temperature.
Do not pour water or other liquids on the product.
Do not place this product near a heat source.
All repairs should be carried out by an authorized professional. Do not attempt to repair this product yourself.
If the user does not obey the instructions given by the manufacturer, the manufacturer is not responsible for any damages.

SPECIFICATIONS

Model: SmartStrip
Type of light source: LED
Wireless protocol: Wi-Fi (2412-2472 MHz), max. transmission power 19.38 dBm
Color scale: RGB+CCT
Chromaticity: 2700-6500 K
Power consumption when switched on: 24 W
Dimmable: Yes
Operating temperature: -20 °C to +85 °C
Operating humidity: 10 – 90 % RH, without moisture condensation
Certification: IP20
Wireless controller battery: 2025, 3V
Input voltage: 220V-240V ~ 50/60 HZ
Control unit input voltage: 12V ~ 2A
Length: 5m
Lifespan: 25,000 hours
Application: Niceboy ION

Niceboy s.r.o. hereby declares that the Niceboy ION SmartStrip radio device type is in compliance with directives 2014/53/EU, 2014/30/EU, 2014/35/EU and 2011/65/EU. The full content of the EU Declaration of Conformity is available on the following websites:
https://niceboy.eu/en/declaration/ion-smartstrip

INFORMATION FOR USERS FOR THE DISPOSAL OF ELECTRICAL AND ELECTRONIC EQUIPMENT (HOMES)

This symbol placed on the product or in the original product documentation means that used electrical or electronic products must not be disposed of together with municipal waste. If you want to dispose of these products correctly, take them to a designated collection point, where they will be accepted free of charge. By disposing of the product in this way, you help protect precious natural resources and help prevent possible negative impacts on the environment and human health that could result from improper waste disposal. Please contact your local authority or the nearest collection point for more detailed information. According to national regulations, fines can also be issued to anyone who disposes of this type of waste incorrectly. Information for users regarding the disposal of electrical and electronic equipment. (Business and Corporate Use).

For proper disposal of electrical and electronic equipment for commercial and business use, contact the manufacturer or importer of the product. They will provide you with information on all disposal methods and, according to the date indicated on the electrical or electronic equipment on the market, tell you who is responsible for financing the disposal of that electrical or electronic equipment. Information regarding disposal procedures in other non- EU countries. The above symbol only applies to European Union countries. For the correct disposal of electrical and electronic equipment, ask your local authorities or the equipment dealer for the appropriate information.

MANUFACTURER: