HEROSPEED AI Face Recognition Device User Guide
- June 6, 2024
- herospeed
Table of Contents
HEROSPEED AI Face Recognition Device
About this Manual
- Use this manual as a guide. The photos, graphics, icons, etc. provided in the manual are for explanation purposes only, and may differ from the specific products. Please prevail in kind.
- This manual may be upgraded later for product upgrading or other request needs; For the lastest version, pls contact our after sales.
Responsibility Statement
- To the fullest extent permitted by law , product describled in this manual (hardware, software, firmware,etc included) is provided “as is”, No expressed warranties or implied warranties is made by us, including but but not limited to its marketability, quality-satisfaction; special purpuse-serving, Non infringement of third party rights; No responsibility is bared by us for any special, collateral, Incidental or indirect damage caused by using our manual or product, including but not limited to damge on commercial profit loss, date or file loss.
- Regarding to the product with internet access, the use of product shall be wholly at your own risks. Our company shall not take any responsibilites for abnormal operation, privacy leakage or other damages resulting from cyber attack hacker attack, virus inspection, or other internet security risks; however, our company will provide timely technical support if required.
- Regulatory approaches are influenced by jurisdictions.Before using this product, please check all relevant laws in your jurisdiction to ensure that your use confirms the applicable laws.If the product is used with illegal products or used for other improper purposes such as infringing the rights of third parties, the company shall not assume any responsibility.
- In the event of any conflicts between this manual and the applicable law, the legal provisions shall prevail.
Products Description
AI face recognition device adopts dual-core ARM Cortex-A7 chip, wide dynamic
high-definition binocular camera, 8-inch large screen, which supports face
capture, face comparison, mask detection, face recognition, human
identification verification, IC card reading and other verification methods.
At present, in response to the multi-element requirements of various
applications, this product can be widely used in airports, entry and exit
gates, railway stations, government agencies, schools, scenic spots, large
factories and other places that require identification. This product will help
customers achieve more efficient, safer and smarter access management.
Products Appearance
- Fill Light
- Infrared sensor
- MIC
- 1080P Camera
- 8 Inch HD Screen
- Card
- Bracket and Outlet
- Speaker
Wire Interface
- RESET (Long press to restore factory settings
- USB2.0 interface, connect to mouse
- Access control interface (1.NO, 2.NC, 3.COM)
- Wiegand interface (1.D0，2.D1，3.GND）
- 1.Alarm out+, 2.Alarm out-
- RJ45 network port, access to Ethernet
- 1.RS485+，2.RS485-
- DC12V Power Interface
Install On The Turnstile
The device can be installed on turnstiles, desktop supports and T-pillars of
different heights. They are installed in the same way; here is an example of
installation on a turnstile.
Step 1 Open a hole with a diameter of D = 35mm on the gate, and the
recommended position is 1/3 to 1/4 from the entrance end.
Step 2 Insert the equipment mounting bracket (with spacer) and the
connecting wire into the opening of the gate, pass the connecting wire through
the nut, and fix it with the lock nut.
Step 3 Adjust the device to a suitable angle (angle between 5 ° -15 °
vertical).
Boot：
According to the introduction of the wire interface, connect the device to the
network so that the device and the configuration computer are under the same
router, and power on.
Platform Operation
Platform Installation
Step 1 Under the Windows operating system, double-click “SDP2000_EN_x64_VX.X.X.exe”, and follow the prompts to perform the installation.
Step 2 After the installation is complete, the desktop displays the SDP2000 Sever platform icon
Add Device
Step 1 Double-click on the desktop “ ” to enter the login interface.
(Google Chrome or Firefox browser is recommended).
Step 2 Enter the user name “admin”, password “admin”, and click “Login”
to login to the LAN platform.
Step 3 Click “Resource → Device → Search Device”.
Step 4 Select the device, click “ ” to modify the device IP, and click “Submit”.
The device default values are as follows:
IP Address: “192.168.1.88” Subnet Mask: “255.255.255.0” Port: “80”
Step 5 Select the device and click “ ” or “ Add “, select the area, and click “Set”.
Import Face Library
Step 1 [Input personnel images in batches] After logging into the platform, click “Personnel → Personnel → Input personnel images in batches” – select pictures – “Upload” and the pictures are added into the device.
NOTE
| [Input personnel information in batches] When importing pictures in batches, the pictures must meet the following requirements:
- The picture naming format can be set as: name.jpg, name_department name.jpg, name_department name_personnel number.jpg (the department name must exist in the system; the personnel number must be unique).
- Ensure a clear face picture and the total size must less than 80M.
---|---
Step 2 Click “Input personnel in batches → batch add people templates.xls”, download “Templates”, enter personnel information in the template according the picture, then save the template, click “Import”, and import the saved personnel information template.
Step 3 After the gallery is added into device it can realize face recognition.
NOTE
When abnormality occurs on the SDP2000 platform, such as abnormal reading or
abnormal data interface request, please follow the steps below:
Right-click the running SDP2000 icon in the lower right corner of the desktop
to check whether the status of Nginx, Mysqld, and SDP2000 is green (normal
state). If any item is displayed in gray, restart the software to make it
green.
| 
---|---
Web Operation
On the web, you can view device information, access records, and configure the device’s network, time, alarm output, face recognition and other related parameters
Preview Real-time Video
Step 1 Open the IE browser and enter “http://device IP address”, such as
“http://192.168.1.88” to enter the login interface.
Step 2 Enter the default user name (admin) and password (12345) of the
device, and click “Login” to enter the “My Device” interface. Here you can
view device related information, status and real-time video of the device.
Face Recognition Configuration
Step 1 Click “Advanced Configuration → Face Recognition” on the device web interface to enter the device face recognition configuration interface.
Step 2 Turn on “Stranger Passages”, “Detection Mask”, “Snapshot Switch”
and “Passing Record Keeping” as needed, and set the relay time, direction and
other parameters.
Step 3 Click “Save” to complete the configuration.
Online Upgrade
Prerequisites: The device is connected to the Internet.
-
Auto online upgrade:
Step 1 On the device web interface,click “Configuration→System Configuration→Maintain”.
Step 2 Check “Auto Online upgrade”, every Wednesday (this time can be setto other day) the equipment automatically detects whether there is a new version online, when “New version detected, update or not” is displayed, click “Upgrade” . The device interface displays “Upgrade will start after reboot.
Please do not shutdown the power”, then the upgrade progress bar will be displayed, and the latest version of the program will be used after the upgrade is completed. -
Manual online upgrade:
Step 1 On the device web interface,click “System →System →Maintain”.
Step 2 Download the upgrade file and click “Online Test”. When there is a new version, the system will prompt a sign stating whether to download it?
Click “OK” to automatically download the new version to the default path.
Step 3 In the upgrade file location, click “Browse”, select the downloaded upgrade file, click “Upgrade”, the device interface will display “Upgrade will start after reboot. Please do not shutdown the power”, the device starts to upgrade, and wait for the upgrade progress bar to complete. The equipment is upgraded.
NOTE
|
- Face recognition distance: 1.2m-2.0m, it is recommended to paste a mark on the floor mark distance.
---|---
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>