mill JDB1500CL Pendant Patio Heater Instruction Manual

June 6, 2024
mill

mill JDB1500CL Pendant Patio Heater Instruction Manual

mill JDB1500CL Pendant Patio Heater Instruction Manual

Please read the manual carefully and make sure that the patio heater is installed according to the provided instructions. The use and maintenance of the product must follow the operation manual as well. Failure to carefully observe these instructions may result in damage to the patio heater and personal injury. If you have any questions about the product assembly or operation, please contact the product importer.

Thanks for buying Mill

Our company was founded in Norway in 1992 by Cato Bryn, specializing in distribution of oil filled radiators and other types of heaters. From 1992 to 2009, we have gained significant knowledge and expertise of different type of heaters, thus enabling us to sell to almost all the largest retailers in the Nordic countries.

In 2010, Cato’s son, Phillip joined the company. Philip looked at the heating industry with fresh eyes and wondered why there had been so little change to the appearance of portable heaters in the last 20 years, especially since interior design in general had changed dramatically over the years. Philip thought consumers should have more styles to choose from other than the typical old-fashioned, traditional heaters.

Since heaters are part of so many homes, Philip and Cato decided to use their extensive knowledge to re-invent new design of heaters. They wanted to create beautiful, modern and minimalistic heaters, using the most advanced technology, that would complement people’s homes. They launched the brand “Mill” in 2012.

Mill offers revolutionary, innovative Norwegian designs. We are continuously innovating to complement our line of products to meet consumers’ demand.

Prospering on our success in the Nordics we decided to promote Mill at some of the world’s largest electronic fairs and home shows – the feedback from retailers and distributors all over the world were amazing. We are proud to say that consumers in over 25 countries can now keep warm with style!

Important Safety Information

You must obey common safety guidelines when using electrical products, especially in the presence of children.

WARNING! To avoid electric shock or damage due to heat, always make sure the plug is pulled out before the heater is moved or cleaned.

  • Read the instructions carefully.

  • The product is intended for outdoor use only.

  • Make sure the product is connected to the house’s regular mains, as it indicated on the product.

  • New products will produce a specific odor when used the first time. This will stop after a short time and is completely harmless.

  • Check for any pieces of packing foam or cardboard that may have fallen into the heating elements of the product. These pieces must be removed in order to avoid unpleasant odors.

  • Prevent the product from overheating – do not cover.

  • Always turn off the product and unplug it when not used for a long time.

  • Pay special attention if the product is used in areas where children, the handicapped or elderly reside.

  • The product should not be set up directly beneath an electrical socket outlet.

  • The cord must not be laid under any kind of carpet. Make sure the cord is laid in such a way that nobody can trip on it.

  • The product must not be used if either the cord or plug is damaged. The product must not be used if it has been dropped on the floor or is damaged in any other way causing it to malfunction.

  • The cord must be repaired by the manufacturer or by an expert if it has been damaged, to avoid dangerous situations.

  • Avoid using extension cords, which may overheat and could possibly start a fire.

  • Never cover the air vents on the heater. Avoid potential fire hazards by making sure the air intakes are not blocked or covered.

  • The product should not be installed in close proximity to flammable materials of any kind because there can always
    be a risk of fire.

  • The product must never be used in rooms where gasoline, paint or other flammable liquids are stored, such as in a garage.

  • The product has an IP rating of IP25.

  • Do not touch the heating lamp with bare fingers. If the heating lamp has been touched in connection with a fault, any fingerprints have to be wiped off using a soft cloth moistened with denatured alcohol. The fingerprints leave grease which can burn to the heating lamp. This shortens the service life of the heating lamp.

  • Make sure that the product is installed in a safe manner and is mounted securely to the ceiling.

  • Never touch an electric heater with wet hands.

  • The product becomes hot when it is on. Therefore, be careful and avoid burning or scorching your skin.

  • The product must be switched off, the plug removed and the product must cool down before it is moved.

  • Avoid overloading the mains (the circuit) where the product is connected. The product may overload the electrical circuit if other electrical devices are plugged into the same socket outlet.

  • The product cannot be used by children under 8 years of age and persons with reduced physical or mental abilities or lack of experience and knowledge unless they have been given supervision or instruction in the safe use of the product and understand the hazards involved.

  • Children should not play with the product. Cleaning and maintenance should not be done by unsupervised children.

  • Children under the age of 3 should be kept away from the product, unless they are under constant supervision.

  • Children aged 3 to 8 years are only permitted to turn the product ON/OFF, assuming the product is mounted according to the assembly instructions and the children have received instruction or supervision in the safe use of the product and understand the hazards involved.

  • The patio heater must not be placed at a distance of less than 1 m to furniture, sunblinds or any other flammable material

  • The heater has to be connected to an electric socket approved for outdoor use.

KEEP THIS OPERATION MANUAL FOR FUTURE REFERENCE!

NEVER TOUCH THE PRODUCT WITH WET HANDS. NEVER COVER YOUR PATIO HEATER

THE PRODUCT IS HOT—DO NOT TOUCH

Specifications

mill JDB1500CL Pendant Patio Heater - Specifications

  • Maximum length that is permitted under European Standard

Benefits of Carbon heating element

This patio heater has a carbon heating element that provides a gentle and comfortable heat.
The element has a soft and pleasant light compared to traditional patio heaters that tend to have a prominent red glare.

Description of patio heater

  1. Heat emission
  2. Indicator light/IR reciever for remote control
  3. ON/OFF
  4. Adjustment point for wire
  5. Adjustable wire
  6. Carabiner
  7. Output selector; 2 effect levels: 750W and 1500W
    mill JDB1500CL Pendant Patio Heater - Description of patio
heater

Installation

  • When unpacking the patio heater, check for missing parts and make sure that it is not faulty or defective.
  • Keep the packaging away from children as it can be dangerous.
  • Make sure that the mains voltage matches the rated voltage on the type plate.
  • Do not disassemble any of the heater components
  • Never pull the power cable in order to move the patio heater.
  • Make sure that the ceiling is firm and solid before any drilling or screwing.
  • Always use the supplied suspension, wire and carabiner when installing the product to the ceiling. Inspect it for damages and make sure it is intact.
  • The patio heater should be installed so that it hangs at a distance of at least 1,8 m from the floor and 0,6 m from the ceiling or superstructure (please see the illustration below).
  • The patio heater should be placed at a distance of at least 0,8 m from adjacent walls or any other objects on both sides (please see the illustration below).
  • There should always be a safety distance of at least 1,0 m below the heater.
  • The heater must be connected to an earthed socket.
  • Do not turn on the patio heater before the installation is complete.

Minimum distances

mill JDB1500CL Pendant Patio Heater - Minimum
distances

How to install the patio heater:

This product must be mounted to a solid and secure ceiling outdoor. Use the supplied suspension to mount the patio heater to the ceiling. Install the suspension to the ceiling by using the supplied screws. Make sure the suspension is securely fastened before you attach the patio heater by connecting the carabiner to the suspension. Please see illustration below.

mill JDB1500CL Pendant Patio Heater - How to install the patio
heater

Adjust the height of the patio heater with the adjustable wire. To adjust the height; use a screwdriver to loosen the two screws connected to the wire (adjustment point for wire). When the screws as loosened you can easily drag the end of the wire to find your desired height for the patio heater.

Tip! It may be easier to adjust the height when the patio heater is installed and hanging from the ceiling.

mill JDB1500CL Pendant Patio Heater - hanging from the
ceiling

Operation

To switch the patio heater on:

  1. Put the plug into an electric socket
  2. Press I on the ON/OFF button at the top of the patio heater to set the heater in standby mode (green light)
  3. Press the button at the back of the patio heater 1 time for 750W (orange light) and 2 times for maximum effect of 1500W (red light).

Attention! Please be aware that the carbon heating element will take some time to reach maximum effect.

As long as the heater has been set in standby mode (green light), you can use the wireless remote control to turn the patio heater ON/OFF and adjust the heat by setting the watt power to 2 different levels; 750W (orange light) and 1500W (red light). Point the remote control in the direction of the indicator light on the patio heater when using it. Battery type: 2 pcs AAA, not included.

To switch the patio heater off:

  1. Press o on the ON/OFF button at the top of the patio heater or press OFF on the remote control
  2. Pull the plug out of the electric socket.

mill JDB1500CL Pendant Patio Heater - Pull the plug out of the electric
socket

Troubleshooting

Before you go through the troubleshooting procedure below, please check the following:

  1. Check if there is electricity in the socket.
  2. Make sure that the product is in standby mode. In other words, the ON/OFF switch at the top of the patio heater is in position I and the indicator light is green.

mill JDB1500CL Pendant Patio Heater - Troubleshooting

Maintenance

The maintenance is simple and does not involve dismantling or moving parts. Make sure that the power is off and that the heater is cold before wiping the product with a dry cloth.
Do not touch the heating lamp with your hands or with hard objects.
Do not use abrasive or corrosive agents to wash the patio heater.

Guarantee

The guarantee is valid for a period of two years. If a fault occurs during this period, the product will be repaired or replaced. In order for the guarantee to apply, the product must be used according to the instructions described in this operation manual and a receipt must be presented.
In case of a product fault, please contact the store, where you have purchased the product, or the product importer.

Waste Management

The symbol indicates that this product may not be thrown away along with ordinary household waste. In order to prevent possible damage to the environment or to human health, the product must be delivered for refurbishment of electric and electronic equipment. Your local electricity company or recycling station can manage the environmentally friendly destruction or refurbishment of such products.

In case of a complaint, please indicate the serial number and enclose the original receipt.
In case of a complaint, questions about the product or spare parts, please contact your dealer or Mill International AS

Mill International AS

Grini Næringspark 10
1361 Østerås
Tlf: +47 22 13 32 00

facebook.com/millnorway
millnorway.com

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

mill User Manuals

Related Manuals