mill 7090019823854 WiFi Socket User Manual
- June 4, 2024
- mill
Table of Contents
User Manual for
Mill WiFi Socket (APP: MillNorway)
Function
Mill WiFi Socket makes your old heaters “smart” by connecting them to your
WiFi network and the Mill app (available for download for iOS and Android,
free of charge). The Mill WiFi Socket has an integrated temperature sensor
and is compatible with all heaters with mechanical thermostats and most
heaters with electronic thermostats (that are able to remember the last set
temperature after a power cut). Ultra accurate humidity sensor included: ±2.0%
RH
By connecting your heaters with the iOS/ The android device through the Mill
WiFi Socket you can do the following:
- Control all your heaters situated in multiple locations. Everything is controlled with the Mill app (with the same user)
- Set up weekly programs (or use the standard program already available in the app) by using the 3 modes: Comfort, Sleep, Away
- Set individual temperatures for 3 different modes in each room
- Override the set programs for the whole house, a specific room, or a specific heater. There is no need to edit your program if you get home earlier than normal one day
- Enable vacation mode for saving energy while you are away. The app will automatically increase the temperature in your house before you get back home
- Share your house with other family members, making control easy
- + many other things
Caution! For safe usage of this product, please make sure your type of heater can be used without supervision. Please consult your heater’s user manual before you connect it to Mill WiFi Socket.
Connection
To download the app search for «MillNorway» in Appstore or Google Play and
install the app on your device.
- Be aware that the Mill app must be installed before you connect your Mill WiFi Socket to your WiFi network. You can then simply follow the instructions given in the app when connecting Mill WiFi Socket.
- Mill WiFi Socket will connect directly to your router via WiFi with 2,4 GHz mode b/g/n.
- Go to our help desk at www.millnorway.com for more information or if you have any questions regarding the Mill app, connecting to WiFi, or other relating questions.
Attention! Mill WiFi Socket will be connected directly to your WiFi router and it is therefore important to make sure the router has sufficient capacity for the number of active devices connected at the same time.
Color codes (WiFi control light)
The Mill WiFi Socket has not been connected to WiFi. The heater keeps an even
temperature throughout the whole day and night
The Mill WiFi Socket is online in the Mill cloud
The Mill WiFi Socket’s WiFi is deactivated by the user
When installing/connecting the Mill-app and cloud, the light will flash at
various speeds. This is normal.
The Mill WiFi Socket has a problem connecting to or finding the WiFi signal.
Please do the following:
- Please remove Mill WiFi Socket from the socket and insert it once again
- Please restart the WiFi router
- Please check the WiFI router to make sure the capacity is sufficient for the number of active devices connected at the same time
- Please make sure 2,4 GHz is activated on your WiFi router. If the problem persists,
The Mill WiFi Socket is offline and has no contact with the Mill cloud
Usage
-
BEFORE USE:
The Mill WiFi Socket is equipped with an integrated temperature sensor, just like the temperature sensors integrated into heaters. To make sure the temperature sensor on Mill WiFi Socket is not overridden by the temperature sensor on the heater, we recommend you set the temperature on the heater to approx. 5 degrees more than your maximum desired temperature. This is done manually on· the heater before you connect Mill WiFi Socket If you for example wish to have a maximum temperature of 25 degrees in the room, you should set the temperature on the heater to 30 degrees before you connect Mill WiFi Socket. When your heater now connects to the Mill app through the Mill WiFi Socket, you can set your desired temperature to 25 degrees or lower in the opp. The temperature set in the Mill app is now the desired temperature for the room.
By setting the temperature on the heater 5 degrees above your maximum desired temperature you simply make sure the heater’s temperature sensor does not override the function of the Mill WiFi Socket. If you have a mechanical thermostat we recommend you set the temperature on the heater some steps above the maximum temperature you normally desire, as estimating accuracy of 5 degrees above could be challenging. -
MILL MODELS COMPATIBLE WITH MILL
WIFI SOCKET: Mill WiFi Socket is compatible with all Mill heaters with an exception of the 2012 model Mill Glass serial number: HL12, as well as our heating series that should not be used without supervision; the Mill Instant convection heater and Mill Compact fan heater. -
SETTINGS:
Activating WiFi: Press «add Mill WiFi Socket» on the home screen in the Mill app. Follow the instructions in the opp.
Delete WiFi settings: Press and hold the WiFi button for seconds. -
USING MILL WIFI SOCKET ON OTHER ELECTRONIC DEVICES:
Mill WiFi Socket can also connect electronic devices other than heaters to your WiFi network and the Mill app by switching off the temperature sensor in the app.
Specifications
- Power Rating: 230V~, SOHC
- Input/Output: 230V, 10A, 50Hz, Max.
- Frequency: 2.4GHz, b/g/n standard
- Whenever you change a WiFi reconnection is required.
- Maximum transmitting power: ≤20dBm
- Frequency range: 2400-2483.5MHz
System Requirements
- iOS 8.0 or higher
- Android .0 or later
Caution!
- For safety, always switch off your appliances before connecting Mill WiFi Socket
- For indoor use only
- Do not cover when in use
- For safely usage of this product, please consult the user manual of the product you are connecting to Mill WiFi Socket
Caution! For safe usage of this product, please make sure your type of heater can be used without supervision. Please consult your heater’s user manual before you connect it to Mill WiFi Socket.
Warranty
The warranty is valid for 2 years. The product will be repaired or replaced
during this time should any malfunction occur. The warranty applies if the
product is used according to these instructions and the customer can present a
purchase receipt. If the product malfunctions in any way, please contact the
store where it was purchased or the importer.
Waste disposal
The symbol indicates that this product is not to be disposed; d of together with household waste. This product must be delivered to a recycling service or container for electrical appliances and electronic equipment. This is done to avoid health risks and prevent harm to the environment. Local businesses (or the environmental station in your neighborhood) are required by law to accept and recycle such products, as a means of environmentally sound disposal.
Min. operating temperature: -5˚C
Min. storage temperature: -10˚C
Placement
Mill International AS
Grini Næringspark 10
1361 Østerås
Norway
www.millnorway.com