ELTEC HT-M2808 Indoor LoRaWAN/LongFi Hotspot User Manual
- June 6, 2024
- ELTEC
Table of Contents
ELTEC HT-M2808 Indoor LoRaWAN/LongFi Hotspot User Manual
HT-M2808
Indoor LoRaWAN/LongFi Hotspot
warning
After the machine is connected to the network (either by inserting the network
cable before the Helium APP connection, or after configuring the Wi-Fi through
the Helium
APP), it will start to update the firmware of the miner and start to
synchronize the blockchain. If the power is cut off at this time, a system
error may occur.
Please press and hold the shutdown button to shut down. Direct power failure
may damage the eMMC.
Activation process
Step 1: Download Helium APP through Apple Store / Google Play.
Step 2: Connect the antenna first (required), and insert the network cable (if
needed). Plug in the power cord and Hotspot will automatically turn on.
Step 3: Use Helium APP to connect to Hotspot.
-
Select Heltec Indoor Hotspot in the Hotspot list.
-
Read Hotspot deployment and diagnostic instructions.
-
Orange light is always on or flashing, system start up.
-
When the power button LED flashes, Bluetooth is turned on.
-
Choose your Hotspot and connect via Bluetooth.
-
According to your situation, choose to use Ethernet or Wi-Fi.
Description
LED description
| Function | Color | Description |
|---|---|---|
| LoRa RX | Red | This LED flashes when LoRa receives data. |
| LoRa TX | Green | The LED flashes when LoRa sends data. |
Blockchain
Synchronization
| ****
Orange
| l Blinking: Bockchain synchronizing;
l Steady on: Blockchain synchronize complete.
Wi-Fi| Blue| Wi-Fi connection is successful.
System| White| HT-M2808 Linux kernel running.
Power button description
- Short press: Restart the system.
- Press longer than 3 seconds1: System shut down.
- The blue light of the power button flashes five minutes after the device is powered on or reset, and Hotspot’s Bluetooth can be found and paired a t this time.
Bluetooth description
The blue light on the power button will continue to flash for 5 minutes after
th e system is turned on, and the Hotspot Bluetooth will be activated. If the
Blue
tooth is not connected within 5 minutes, it will be turned off automatically.
Packing List
| Name | Unit | Quality |
|---|---|---|
| Heltec Indoor Hotspot | PCS | 1 |
| 12V / 3A DC Adapter | PCS | 1 |
| DC adapter 110/220V power wire | PCS | 1 |
| SMA LoRa antenna (1.5m shielded wire) | PCS | 1 |