ELTEC CYBOX RT 2-A Automotive Wireless Router Instructions
- June 9, 2024
- ELTEC
Table of Contents
ELTEC CYBOX RT 2-A Automotive Wireless Router
SAFETY INFORMATION
REVISION
- Revision: 1.0
- Date: 24.11.2022
PACKAGE CONTENTS
- Product: 1 x CYRTA-2xxx
- Documentation: 1 x Safety Information
SAFETY INFORMATION
-
Please read the configuration and installation manuals carefully before installing and using any of our products, especially for output power and frequency bands of the radio modules. You can download the manuals after registration in the Download Center
(https://downloadcenter.eltec.de/login) on our website www.eltec.com. -
Allow only appropriately trained personnel to handle the devices and observe the Electrostatic Discharge (ESD) protective measurements. Also, the internal SIM cards are only allowed to be installed, taken into operation and replaced by qualified and trained staff. Furthermore, ESD protection measures must be taken.
-
Usage restriction: The designated product may only be used in an industrial environment
(Class A product) in accordance to the specifications stated in the manuals. -
The device can become very hot during operation (> 80°C).
-
Make sure the device is protected from accidental contact.
-
The device must be installed inaccessible to children.
-
For optimal heat dissipation the connectors should face downwards.
-
Do not install the device close to any sources of heat, such as radiators or heating ducts.
-
Keep the device away from any liquids and avoid exposure to dripping or splashing. The protection class of the housing is IP 40.
-
Before connecting the power supply, connect the device to protective earth.
-
To prevent the risk of electric shock, turn off the external power supply and remove the power supply cable from the electrical outlet before handling or disassembling the system.
-
When connecting or disconnecting devices to or from the system ensure that the power cables of the devices are unplugged before the signal cables are connected. If possible, disconnect all power cables from the existing system before connecting the device.
-
Before connecting or removing signal cables ensure that all power cables are unplugged.
-
When using LTE, WLAN or GNSS interfaces connect an appropriate antenna to the QLS built-in socket.
-
At least 20 cm separation distance between the antenna and the user’s body must be always maintained.
RADIO FREQUENCIES AND TRANSMITTING POWER
WLAN | Range | Max. Power (e.i.r.p.) |
---|---|---|
2.4 GHz | 2.4 – 2.483 GHz | 20 dBm |
5 GHz | 5.15 – 5.35 GHz | 23 dBm |
5.47 – 5.725 GHz | 30 dBm | |
LTE | Downlink (DL) | Uplink (UL) |
B1 | 2110 – 2170 MHz | 1920 – 1980 MHz |
B3 | 1805 – 1880 MHz | 1710 – 1785 MHz |
B7 | 2620 – 2690 MHz | 2500 – 2570 MHz |
B8 | 925 – 960 MHz | 880 – 915 MHz |
B20 | 791 – 821 MHz | 832 – 862 MHz |
UMTS (WCDMA) | Downlink (DL) | Uplink (UL) |
B1 | 2110 – 2170 MHz | 1920 – 1980 MHz |
B8 | 925 – 960 MHz | 880 – 915 MHz |
INFO: The following restrictions are effective in the EU member states
AT, BE, BG, CY, CZ, DE, DK, EE, EL, ES, FI, FR, HR, HU, IE, IT, LT, LU, LV,
MT, NL, PL, PT, RO, SE, SI, SK.
The WLAN frequency band 5.15 GHz to 5.35 GHz is intended only for indoor use.
Recommended antenna type and gain
- WLAN: Dipole antenna – 4.5 dBi (2.4 GHz) & 7.0 dBi (5 GHz)
- LTE | UMTS: Dipole antenna – 3.0 dBi
For further details about the setting of transmit powers please refer to the configuration manual.
LEGAL INFORMATION
Detailed technical characteristics and legal information as well as
effective license provisions can be found in the Download Center
(https://downloadcenter.eltec.de/login) on our website
www.eltec.com.
EU Declaration of Conformity
ELTEC Elektronik AG herewith declares that the device is compliant to the
basic requirements of the directive 2014/53/EU. The full text of the EU
declaration of conformity is available in the Download Center.
Copyright © 2022 ELTEC Elektronik AG, Mainz, Germany. All rights reserved
CONTACT
ELTEC Elektronik AG: Fon +49 6131 918 100
Galileo-Galilei-Straße 11: Fax +49 6131 918 195
55129 Mainz Email: info@eltec.de
Germany: wwweltec.de