ELTEC CYBOX AP 2 AG Electronics Instruction Manual

June 9, 2024
ELTEC

ELTEC LOGO CYBOX AP 2
CYBOX LTE 2
SAFETY INFORMATION

REVISION

Revision 1.0
Date 31.01.2023

PACKAGE CONTENTS

Product 1 x CYAPW-1xxx or CYLTE-1xxx
Documentation 1 x Safety Information

LEGAL INFORMATION

Detailed technical characteristics and legal information as well as effective license provisions can be found in the Download Center (https://downloadcenter.eltec.de/login) on our website www.eltec.com.
EU Declaration of Conformity
ELTEC Elektronik AG herewith declares that the device is compliant to the basic requirements of the directive 2014/53/EU. The full text of the EU declaration of conformity is available in the Download Center.

CONTACT

ELTEC Elektronik AG Fon +49 6131 918 100
Galileo-Galilei-Straße 11 Fax +49 6131 918 195
55129 Mainz Email: info@eltec.de
Germany www.eltec.de

SAFETY INFORMATION

  • Please read the configuration and installation manuals carefully before installing and using any of our products, especially for output power and frequency bands of the radio modules.
    You can download the manuals after registration in the Download Center (https://downloadcenter.eltec.de/login) on our website www.eltec.com.

  • Allow only appropriately trained personnel to handle the devices and observe the Electrostatic Discharge (ESD) protective measurements. Also, the internal SIM cards are only allowed to be installed, taken into operation and replaced by qualified and trained staff.
    Furthermore, ESD protection measures must be taken.

  • Usage restriction: The designated product may only be used in an industrial environment (Class A product) in accordance to the specifications stated in the manuals.

  • The device can become very hot during operation (> 80°C).

    • Make sure the device is protected from accidental contact.
    • The device must be installed inaccessible to children.
    • For optimal heat dissipation the connectors should face downwards.
  • Do not install the device close to any sources of heat, such as radiators or heating ducts.

  • Keep the device away from any liquids and avoid exposure to dripping or splashing. The protection class of the housing is IP 40.

  • The device can be operated with voltages higher than 60 VDC.

    • Incorrect handling can cause a fatal electrical shock.
    • Before connecting the power supply, connect the device to protective earth.
  • To prevent the risk of electric shock, turn off the external power supply and remove the power supply cable from the electrical outlet before handling or disassembling the system.

  • When connecting or disconnecting devices to or from the system ensure that the power cables of the devices are unplugged before the signal cables are connected. If possible, disconnect all power cables from the existing system before connecting the device.

  • Before connecting or removing signal cables ensure that all power cables are unplugged.

  • When using LTE, WLAN or GNSS interfaces connect an appropriate antenna to the QLS/RPSMA built-in socket.

  • At least 20 cm separation distance between the antenna and the user’s body must be always maintained.

RADIO FREQUENCIES AND TRANSMITTING POWER

WLAN Range Max. Power (e.i.r.p.)
2.4 GHz 2.4 – 2.483 GHz 20 dBm
5 GHz 5.15 – 5.35 GHz 23 dBm
5.47 – 5.725 GHz 30 dBm
5.8 GHz 5.725 – 5.875 GHz 13 dBm
LTE Downlink (DL) Uplink (UL)
B1 2110 – 2170 MHz 1920 – 1980 MHz
B3 1805 – 1880 MHz 1710 – 1785 MHz
B7 2620 – 2690 MHz 2500 – 2570 MHz
B8 925 – 960 MHz 880 – 915 MHz
B20 791 – 821 MHz 832 – 862 MHz
UMTS (WCDMA) Downlink (DL) Uplink (UL)

(e.i.r.p.)**
B1| 2110 – 2170 MHz| 1920 – 1980 MHz| 24 dBm
B3| 1805 – 1880 MHz| 1710 – 1785 MHz| 24 dBm
B8| 925 – 960 MHz| 880 – 915 MHz| 24 dBm

The following restrictions are effective in the EU member states AT, BE, BG, CY, CZ, DE, DK, EE, EL, ES, FI, FR, HR, HU, IE, IT, LT, LU, LV, MT, NL, PL, PT, RO, SE, SI, SK.
The WLAN frequency band 5.15 GHz to 5.35 GHz is intended only for indoor use.
Recommended antenna type and gain

WLAN Dipole antenna – 4.5 dBi (2.4 GHz) & 7.0 dBi (5 GHz)
LTE / UMTS Dipole antenna – 3.0 dBi

For further details about the setting of transmit powers please refer to the configuration manual.

ELTEC LOGOCopyright © 2022 ELTEC Elektronik AG, Mainz, Germany. All rights reserved.

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals