DAESUNG ELTEC Audio and Video System for Car Instructions
- June 5, 2024
- Daesung Eltec
Table of Contents
DAESUNG ELTEC Audio and Video System for Car
Operation Specification
The explanation of the related key operation is shown as following
- Short press: press the key and release it within a time period.
- Long press: press the key and hold it more than a time-period.
- Press: Independent of(Ⅰ) (Ⅱ),only a key operation.
RADIO
Channel change manually UP/DOWN
Operation key
NO. | Key name | operation | reference |
---|---|---|---|
1 | Short press | <1.5 seconds | |
2 | Short press | <1.5 seconds |
Channel change automatically UP/DOWN
Operation key
NO. | Key name | Operation | reference |
---|---|---|---|
1 | Long press | >1.5 seconds | |
2 | Long press | >1.5 seconds | |
5 | Short press | <1.5 seconds | |
6 | Long press | >1.5 seconds |
Band transition
Operation key Head unit key
NO. | Key name | Operation | Reference |
---|---|---|---|
1 | RADIO | Short press | <1.5 seconds |
2 | RADIO | Long press | >1.5 seconds |
Band transition
When radio mode, press operation key(RADIO), it will change the band. At this time return to the last received channel.
In auto preset mode, band transition is shown as following
Preset call
Operation key Head unit key
NO. | Key name | Operation | Reference |
---|---|---|---|
1 | PRESET KEY-CH1/DISP | Short press | <1.5 seconds |
2 | PRESET KEY-CH2/PAGE | Short press | <1.5 seconds |
3 | PRESET KEY-CH3 | Short press | <1.5 seconds |
4 | PRESET KEY-CH4/RPT | Short press | <1.5 seconds |
5 | PRESET KEY-CH5/RDM | Short press | <1.5 seconds |
6 | PRESET KEY-CH6 | Short press | <1.5 seconds |
Preset call
When radio is in reception status, press operation key(CH1~CH6), transfer to the preset channel.
Preset memory
Operation key Head unit
NO. | Key name | Operation | Reference |
---|---|---|---|
1 | PRESET KEY-CH1/DISP | Long press | >1.5 seconds |
2 | PRESET KEY-CH2/PAGE | Long press | >1.5 seconds |
3 | PRESET KEY-CH3 | Long press | >1.5 seconds |
4 | PRESET KEY-CH4/RPT | Long press | >1.5 seconds |
5 | PRESET KEY-CH5/RDM | Long press | >1.5 seconds |
6 | PRESET KEY-CH6 | Long press | >1.5 seconds |
Transition between Auto preset mode and Common mode
Operation key Head unit key
NO. | Key name | Operation | Reference |
---|---|---|---|
1 | AUTO-P | Long press | >1.5 seconds |
2 | AUTO-P | Short press | <1.5 seconds |
3 | RADIO | Short press | <1.5 seconds |
USB
USB source transition
Operation key Head unit key
NO. | Key name | Operation | Reference |
---|---|---|---|
1 | MEDIA | Short press | <1.5 seconds |
USB source transition
- When short press operation key MEDIA transfer to USB source.
- When USB device is not connected, it will display NO DEVICE
File select up/down
NO. | Key name | Operation | Reference |
---|---|---|---|
1 | Short press | <1.5 seconds | |
2 | Short press | <1.5 seconds |
Operation key Head unit key
Fast forward/Rewind down
NO. | Key name | Operation | Reference |
---|---|---|---|
1 | Long press | >1.5 seconds | |
2 | Long press | >1.5 seconds |
Repeat
Operating key Head unit key
NO. | Key name | Operation | Reference |
---|---|---|---|
1 | 4/RPT | Short press | <1.5 seconds |
Repeat
The repeat of the USB include single track repeat and the folder repeat.
One track repeat
During the play, press operation key(4/RPT), transfer to one track repeat
mode.
Releasing from one track repeat
When one track repeat operation, one track repeat will release.
Folder repeat
When one track repeat, press operation key 4/RPT again. It will transfer to
folder repeat.
Releasing from folder repeat
Software Development, R&D Center, DAESUNG ELTEC. When folder repeat, press
operation keyn4/RPT again.
Random
NO. | Key name | Operation | Reference |
---|---|---|---|
1 | 5/RDM | Short press | <1.5 seconds |
Operating key Head unit key
One track random
During the play, press operation key(5/RDM), play the random track, the
figure is as following.
Releasing from random
When set random, press operation key(5/RDM) again.
Transfer to text display
Operation key Head unit key
NO. | Key name | Operation | Reference |
---|---|---|---|
1 | 1/DISP | Short press | <1.5 seconds |
Transfer to text display
When in USB source, press operation key(1/DSP), transfer to text display. The following content is changed in the order.
Text display page forward
Operation key Head unit key
NO. | Key name | Operation | Reference |
---|---|---|---|
1 | 2/PAGE | Short press | <1.5 seconds |
BT Audio
BT Audio source transition
Operation key Head unit key
NO. | Key name | Operation | Reference |
---|---|---|---|
1 | MEDIA | Short press | <1.5 seconds |
BT Audio source transition
- When short press operation key MEDIA transfer to BT Audio source.
- When BT Audio device is not connected, it will display NO DEVICE.
File select up/down
Operation key Head unit key
NO. | Key name | Operation | Reference |
---|---|---|---|
1 | Short press | <1.5 seconds | |
2 | Short press | <1.5 seconds |
BT Handsfree
BT Handsfree
Function
Function to make a call with the device using Bluetooth through MIC and
SPEAKER
Support profile
- HFP(v1.7)
- PBAP(v1.1)
CaACll mode
NO. | Key name | Operation | Reference |
---|---|---|---|
1 | PHONE | Short press | <1.5 seconds |
2 | PHONE | Long press | >1.5 seconds |
3 | ENCODER | Rotation(Right) | Right |
4 | ENCODER | Rotation(Left) | Left |
Operation key Head unit key
Incoming mode
If pressing the operation key (PHONE) for less than 1.5 seconds, it
converts to the call state.
Incoming Call Release
If pressing all operation keys (PHONE, ENCODER) in the incoming state, the
state is released. If ACC is off during the call, the status will be released.
Handsfree mode
Operation Key Head unit key
NO. | Key name | Operation | Reference |
---|---|---|---|
1 | PHONE | Short press | <1.5 seconds |
2 | PHONE | Long press | >1.5 seconds |
3 | Encoder | Rotate(Right) | Right |
4 | Encoder | Rotate(Left) | Left |
5 | MENU | Short press | <1.5 seconds |
Handsfree mode
To enter the handsfree mode, press the operation key PHONE during the call
status. When a phone number is selected through PHONE MENU and is sent to the
outgoing state, it will switch to handsfree mode. In Private mode, press the
operating key (MENU) to switch to handsfree mode.
Method to be released handsfree mode
When the operation key PHONE pressing, the call is ended and switches to
the previous source state. When the operation key(MENU), it is switched to
Private mode.
If ACC is off during a call, the status is released.
Private mode
Operation Key Head unit key
Private mode
NO. | Key name | Operation | Reference |
---|---|---|---|
1 | PHONE | Short press | <1.5 seconds |
2 | PHONE | Long press | >1.5 seconds |
3 | MENU | Short press | <1.5 seconds |
In hands-free mode, press the Operation key MENU to switch to Private mode. Even if ACC is turned off during a call, the status is not released.
Method to be released Private mode
When the operation key PHONE pressing, the call is ended and switches to
the previous source state. When the operation key MENU it is switched to
Private mode.
Pairing mode
Operation Key Head unit key
NO. | Key name | Operation | Reference |
---|---|---|---|
1 | PHONE | Short press | <1.5 seconds |
2 | Encoder | Rotate(Right) | Right |
3 | Encoder | Rotate(Left) | Left |
4 | Encoder | Short press | <1.5 seconds |
5 | BACK | Short press | <1.5 seconds |
6 | BACK | Long press | >1.5 seconds |
Steering wheel Key
- To use Bluetooth pairing mode, the device (phone) to be connected must first be activated in Bluetooth mode.
- To enter pairing mode, select the operation key (encoder) from the PHONE MENU of Head Unit.
- When entering pairing mode, search for searchable Bluetooth devices and display the detected devices on the screen.
- The timeout to detect Bluetooth devices is 60 seconds.
- The detected device is displayed by the name of the device.
- If the connection fails, display it as “Fail” and keep the list of devices that have been rescanned.
- If the connection is successful, display “CONNECTED” and return to normal mode.
BASS adjusting mode
Function
It is adjust to the low tone of the voice output.
Operation key
Head unit key
BASS adjusting mode
- For step, from center point up/down 5steps -5 ~ 0 ~ 5
- Initialization : 0
- When BASS adjusting mode, turn operating key Encoder it will change to the up.
- When BASS adjusting mode, turn operating key Encoder it will change to the up.
TREBLE adjusting mode
Function
It is to adjust the high tone of the voice output.
Operation key
Head unit key
NO. | Key name | Operation | Reference |
---|---|---|---|
1 | Encoder | Short press | <1.5 seconds |
2 | Encoder | Rotation(R) | Right |
3 | Encoder | Rotation(L) | Left |
TREBLE adjusting mode
- For step, from center point up/down 5steps-5 ~ 0 ~ 5
- Initialization : 0
- When TREBLE adjusting mode, turn operating key(Encoder), it will change to the up.
- When TREBLE adjusting mode, turn operating key(Encoder), it will change to the up.
FADER adjusting mode
Function
It is to adjust the AMP which is behind or before the voice output.
Operation key
Head unit key
NO. | Key name | Operation | Reference |
---|---|---|---|
1 | Encoder | Short press | <1.5 seconds |
2 | Encoder | Rotation(R) | Right |
3 | Encoder | Rotation(L) | Left |
FADER adjusting mode
- For step, from center point up/down 11steps.
- REAR11 ~ 0 ~ FRONT11
- Initialization : Center
- When FADER adjusting mode, turn operation key Encoder, if the front amp is emphasized, the selected value will be the amp.
BALANCE adjusting mode
Function
It is to adjust the AMP which is on the right or left the voice output.
Operation key
Head unit key
NO. | Key name | Operation | Reference |
---|---|---|---|
1 | Encoder | Short press | <1.5 seconds |
2 | Encoder | Rotation(R) | Right |
3 | Encoder | Rotation(L) | Left |
BALANCE adjusting mode
NO. | Key name | Operation | Reference |
---|---|---|---|
1 | Encoder | Short press | <1.5 seconds |
2 | Encoder | Rotation(R) | Right |
3 | Encoder | Rotation(L) | Left |
- For step from center point up/down 11steps.
- REAR11 ~ 0 ~ FRONT11
- Initialization : Center
- When BALANCE adjusting mode, turn operation key Encoder if the right amp is emphasized, the selected value will be the amp.
- When BALANCE adjusting mode, turn operation key Encoder if the left amp is emphasized, the selected value will be the amp.
FCC Warning
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful
interference in a residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if
not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment
does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try
to correct the interference by one or more of the following measures
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help
Caution
Any changes or modifications to this device not explicitly approved by
manufacturer could void your authority to operate this equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions
- This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
- This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment.
- This equipment should be installed and operated with minimum 20 cm between the radiator and your body
- This transmitter must not be collocated or operating in conjunction with any other antenna or transmitter unless authorized to do so by the FCC