ELTEC CYBOX AP 3 Railway WLAN Access Point Owner’s Manual
- June 9, 2024
- ELTEC
Table of Contents
ELTEC CYBOX AP 3 Railway WLAN Access Point
REVISION
- Revision 1.0
- Date 24.11.2022
PACKAGE CONTENTS
- Product 1 x CYAPW-3xxx or CYRTW-3xxx
- Documentation 1 x Safety Information
LEGAL INFORMATION
Detailed technical characteristics and legal information as well as effective license provisions can be found in the Download Center (https://downloadcenter.eltec.de/login) on our website www.eltec.com.
EU Declaration of Conformity
ELTEC Elektronik AG herewith declares that the device is compliant to the
basic requirements of the directive 2014/53/EU. The full text of the EU
declaration of conformity is available in the Download Center.
CONTACT
| ELTEC Elektronik AG | Fon | +49 6131 918 100 |
|---|---|---|
| Galileo-Galilei-Straße 11 | Fax | +49 6131 918 195 |
| 55129 Mainz | info@eltec.de | |
| Germany | wwweltec.de |
SAFETY INFORMATION
-
Please read the configuration and installation manuals carefully before installing and using any of our products, especially for output power and frequency bands of the radio modules. You can download the manuals after registration in the Download Center
(https://downloadcenter.eltec.de/login) on our website www.eltec.com. -
Allow only appropriately trained personnel to handle the devices and observe the Electrostatic Discharge (ESD) protective measurements. Also, the internal SIM cards are only allowed to be installed, taken into operation and replaced by qualified and trained staff. Furthermore, ESD protection measures must be taken.
-
Usage restriction: The designated product may only be used in an industrial environment (Class A product) in accordance to the specifications stated in the manuals.
-
The device can become very hot during operation (> 80°C).
- Make sure the device is protected from accidental contact.
- The device must be installed inaccessible to children.
- For optimal heat dissipation the connectors should face downwards.
-
Do not install the device close to any sources of heat, such as radiators or heating ducts.
-
Keep the device away from any liquids and avoid exposure to dripping or splashing. The protection class of the housing is IP 40.
-
The device can be operated with voltages higher than 60 VDC.
- Incorrect handling can cause a fatal electrical shock.
- Before connecting the power supply, connect the device to protective earth.
-
To prevent the risk of electric shock, turn off the external power supply and remove the power supply cable from the electrical outlet before handling or disassembling the system.
-
When connecting or disconnecting devices to or from the system ensure that the power cables of the devices are unplugged before the signal cables are connected. If possible, disconnect all power cables from the existing system before connecting the device.
-
Before connecting or removing signal cables ensure that all power cables are unplugged.
-
When using 5G, LTE, WLAN or GNSS interfaces connect an appropriate antenna to the QLS built-in socket.
-
At least 20 cm separation distance between the antenna and the user’s body must be always maintained.
RADIO FREQUENCIES AND TRANSMITTING POWER
| WLAN | Range | Max. Power (e.i.r.p.) |
|---|---|---|
| 2.4 GHz | 2.4 – 2.483 GHz | 20 dBm |
| 5 GHz | 5.15 – 5.35 GHz | 23 dBm |
| 5.47 – 5.725 GHz | 30 dBm | |
| 5G NR | LTE | Downlink (DL) |
| n1 (SA) | B1 | 2110 – 2170 MHz |
| n3 (SA) | B3 | 1805 – 1880 MHz |
| – | B7 | 2620 – 2690 MHz |
| – | B8 | 925 – 960 MHz |
| – | B20 | 791 – 821 MHz |
| n28 (SA) | B28 | 758 – 803 MHz |
| – | B38 | 2570 – 2620 MHz |
| – | B40 | 2300 – 2400 MHz |
| – | B42 | 3400 – 3600 MHz |
| n78 (SA/NSA) | – | 3300 – 3800 MHz |
| UMTS (WCDMA) | Downlink (DL) | Uplink (UL) |
| B1 | 2110 – 2170 MHz | 1920 – 1980 MHz |
| B3 | 1805 – 1880 MHz | 1710 – 1785 MHz |
| B8 | 925 – 960 MHz | 880 – 915 MHz |
The following restrictions are effective in the EU member states AT, BE, BG, CY, CZ, DE, DK, EE, EL, ES, FI, FR, HR, HU, IE, IT, LT, LU, LV, MT, NL, PL, PT, RO, SE, SI, SK.
The WLAN frequency band 5.15 GHz to 5.35 GHz is intended only for indoor use.
The 5G NR frequency band n28 is restricted to 703 – 736 MHz (UL) and 758 – 791
MHz (DL).
The 5G NR frequency band n78 is restricted to 3400 – 3800 MHz (UL, DL)
Recommended antenna type and gain
- WLAN Dipole antenna – 3.5 dBi (2.4 GHz) & 3.0 dBi (5 GHz)
- 5G NR Dipole antenna – 8.0 dBi (SA bands) & 11.0 dBi (NSA bands)
- LTE | UMTS Dipole antenna – 11.0 dBi | 11.5 dBi
For further details about the setting of transmit powers please refer to the configuration manual
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>