Bluestone TWS10 True Wireless Earbuds User Manual

: June 6, 2024
: Bluestone

Table of Contents

Product Overview
Power ON/OFF
Listening To Music Wirelessly
Hand Free Calling Function
Charging
CONNECTION
Important Safeguards
1 Year Limited Warranty
Read User Manual Online (PDF format)
Download This Manual (PDF format)

Bluestone TWS10 True Wireless Earbuds User Manual

Product Overview

Built-in Mirror
Pull-out Phone Stand
Left Button
Right Button
Charging Case LED Indicator
Earbud LED Indicator
Charging Port

Power ON/OFF

Function	Operation buttons	Other way
Power on	Long press for 3 seconds to
switch on	Take earbuds out of the case,

device will power on automatically
Power off| Long press for 3 seconds to
switch off| Put earbuds back in the case, device will power off and charge

automatically

Listening To Music Wirelessly

Music Mode| Function| Operation
Button
---|---|---
Playing music| | Short press
Pause| | Short press
Play Next| > | Double tap right

earbud button

Play Last| < | Double tap left earbud button
Fast Forward| > >| Hold right
earbud button
Rewind| < <| Hold left
earbud button

Hand Free Calling Function

Hands free Mode| Function| Operation
Button
---|---|---
Incoming Call| Answer incoming call| Short press to

answer calls

Incoming Call| Reject incoming call| Long press 3 seconds

to reject calls

On the line| End the call| Short press to end calls
Lilting| Call back| Press 2 times right/left unit

Charging

The earphone has built-in rechargeable battery. When the battery is drained out, earphone would turn off automatically Please recharge the earphone.
Put the earphone into the charging case for charging. When it’s charging, a red and blue LED light will turn on for both the Earbuds and the charging case When it’s fully charged, the red LED light will turn off.
Charging case also has built-in rechargeable battery. Connect the charging case to the included USB charging cable. When it’s charging, the blue LED indicator light will turn on. The case is fully charged when all 4 LED lights are on.

CONNECTION

After powering on the TWS earphones, the earbuds will be automatically pair and audio will play with the message “”. If not, please double click the left/right earbud touch button to pair them
Once you have activated Bluetooth on your device, select the pairing name from the list of available Bluetooth devices.
Once paired successful, you would hear audio message “Connected” and the blue LED will flash. You can now start to use the device.
In unpaired mode and standby state, the device will switch off automatically after 5 minutes.

Important Safeguards

Do not use this unit for anything other than its intended use.
Keep the unit away from heat source and direct sunlight.
Do no expose the unit to extreme high or low temperatures.
Use the product in a location with a temperature of 32°F (0°C) 95°F (35°C).
Do not let the unit come in contact with water or any liquid. If it becomes wet, immediately unplug from the power source.
Do not handle the unit, USB cable, or wall charger with wet hands.
Do not let dust or other things accumulate on the product and the wall charger.
Do not use the unit if it has been dropped or damaged in any way.
Repairs to electrical equipment should only be performed by a qualified electrician.
Improper repairs may place the user at serious risk.
If you have an electrical device, such as a pacemaker, consult a physician before using this product.
Do not place a magnetic card (ie. Credit Card) or similar items near this product.
Use the specified power source and voltage.
Do not use a voltage converter/ travel adapter.
Make sure the wall charger is inserted all the way into the electrical outlet. -When not in use, unplug the wall charger.
Place the unit on a sturdy and flat surface while charging.
Keep the unit out of reach of children.

BATTERY DISPOSAL:

This product contains a lithium polymer battery. Lithium polymer batteries are environmentally safe when fully discharged. Please refer to your local and state laws for battery disposal procedures.