QFX BT-89 Portable Speaker User Manual
- June 6, 2024
- QFX
Table of Contents
QFX BT-89 Portable Speaker User Manual
Control Panel Function
-
LED Display
-
Power (OFF/ON) VOLUME – & +
-
MIC Input
-
USB JACK
-
AUX Input
-
Previous Track
-
Play/Pause/TWS (Wireless Bluetooth Connection: Under bluetooth mode, press the TWS button for 3 seconds to pair another TWS speaker; Under FM mode, lightly press Play/Pause/TWS to enter into automatic scan and all the scanned radio stations will be saved automatically.)
-
Next Track
-
MODE/LED ON (Press and hold to turn on/off light; Press to enter
BT, FM Radio, AUX, USB -
DC interface (5V) 1A min
-
Charging Status
RED=Charging
Light OFF = Fully Charged
POWER SOURCE
- Please charge the unit at least 4 hours before first time using.
- Turn the dial clockwise/anticlockwise to switch on/off the unit.
CHARGE THE BATTERY
When the battery is charging, the CHARGE STATUS light shows on the LED display is red. After the battery has fully charged, the light turns off.
- Connect the USB charge cable to the DC5V interface of the speaker firmly.
- When the battery is fully charged, please disconnect the USB charge cable from the speaker.
- The speaker works normally when charging.
POWER/VOLUME
Twist the dial clockwise/anticlockwise to increase/discrease the volume.
PREVIOUS/NEXT BUTTON
Under playing status, press PREVIOUS/NEXT button to get back to a previous or
next song.
PAUSE/PLAY BUTTON
To stop playing the current track, please press PAUSE/PLAY button on the
control panel. Press it once again to continue playing.
MODE/LED ON
Long press to turn on/off light.
Lightly press to enter into playing mode selection (Bluetooth, FM Radio, AUX
Input, USB).
AUX IN JACK
- Connect an audio cable to the AUX IN JACK of the speaker and to the audio output socket on the external audio devices such as MP3 player, discman, etc, then select LINE by pressing the MODE/LED ON button on the control panel.
- Play from an external audio device.
MIC IN JACK
Plug in microphone directly for playing.
USB JACK
Insert USB card directly for playing.
FM FUNCTION
Press MODE/LED ON button to switch to FM mode. Press PLAY/PAUSE button on control panel for automatic searching and saving the radio stations, by pressing PREVIOUS or NEXT you can select a previous or next radio station.
Bluetooth
Press MODE/LED ON button to toggle through functions, BT, AUX, USB, FM Radio To pair your BT-89 to your mobile device, begin by turning on the BT-89. Proceed by enablingthe Bluetooth function on the unit (BT-89). Once enabled, open your mobile device settings and search for “QFX BT-89”. Select “QFX BT-89” and wait for succeful connection. your mobile device and BT-89 should be paired and ready for music playback.
- A TWS Connection works only with the same make and model and cannot support more than 2 speakers.
- Turn on the Speakers, switch to BLUETOOTH mode by pressing the MODE button. The word “BLUE” on the LED screen will flash.
- Then, connect the two speakers by pressing the Play/Pause (TWS) button on one of the speakers for 3 seconds.
- To connect the phone, open the Bluetooth settings, search and connect to ‘QFX PBX-616’.
- Select music from phone and enjoy True Wireless Stereo.
- To turn off TWS. press and hold the Play/Pause (TWS) button for 3 seconds.
SPECIFICATIONS
Power Output: 8W
Frequency Response: 50Hz-20KHz
Power Supply: DC5V 1A min
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>