Bluestone TWS11 True Wireless AERO Buds User Manual

: June 6, 2024
: Bluestone

Table of Contents

CHARGING
CONNECTION
Important Safeguards:
Read User Manual Online (PDF format)
Download This Manual (PDF format)

User Manual

TWS11

Left Touch Sensor
Right Touch Sensor
Charging Case LED Indicator
Earbud LED Indicator
Charging Port

POWER ON/OFF

Function	Operation buttons	Other way
Power on	Long press for 3 seconds to
switch on	Take earbuds out of the case, the device will power on

automatically
Power off| Long press for 3 seconds to
switch off| Put earbuds back in the case, the device will power off and charge automatically

LISTENING TO MUSIC WIRELESSLY

Music Mode| Function| Operation
Button
---|---|---
Playing music| | Short tap
Pause| | Short tap
Play Next|

| Double tap right

earbud sensor

Play Last|

<

| Double tap left earbud sensor
Fast Forward|

| Hold right earbud sensor
Rewind|

< <

| Hold left earbud sensor

HAND FREE CALLING FUNCTION

Hands free Mode	Function	Operation Button
Incoming Call	Answer incoming call	Short press to answer calls
Incoming Call	Reject Incoming call	Long press 3 seconds to reject calls
On the line	End the call	Short press to end calls
Calling	Call back	Press 2 times right/left unit

CHARGING

The earphone has a built-in rechargeable battery. When the battery is drained out, the earphone would turn off automatically, Please recharge the earphone.
Put the earphone into the charging case for charging. When it’s charging, a red and blue LED light will turn on for both the Earbuds and the charging case When it’s fully charged, the red LED light will turn off.
Charging case also has a built-in rechargeable battery. Connect the charging case to the included USB charging cable. When it’s charging, the blue LED indicator light will turn on. The case is fully charged when all 4 LED lights are on.

CONNECTION

After powering on the TWS earphones, the earbuds will be automatically pair and audio will play with the message “.
If not, please double click the left/right earbud touch button to pair them
Once you have activated Bluetooth on your device, select the pairing name from the list of available Bluetooth devices.
Once paired successfully, you would hear the audio message “Connected” and the blue LED will flash. You can now start to use the device.
In unpaired mode and a standby state, the device will switch off automatically after 5 minutes.

Important Safeguards:

Do not use this unit for anything other than its intended use.
Keep the unit away from the heat sources and direct sunlight.
Do not expose the unit to extremely high or low temperatures.
Use the product in a location with a temperature of 32°F (0°C) – 95°F (35°C).
Do not let the unit come in contact with water or any liquid. If it becomes wet, immediately unplug from the power source.
Do not handle the unit, USB cable, or wall charger with wet hands.
Do not let dust or other things accumulate on the product and the wall charger.
Do not use the unit if it has been dropped or damaged in any way.
Repairs to electrical equipment should only be performed by a qualified electrician.
Improper repairs may place the user at serious risk.
If you have an electrical device, such as a pacemaker, consult a physician before using this product.
Do not place a magnetic card (ie. Credit Card) or similar items near this product.
Use the specified power source and voltage.
Do not use a voltage converter/ travel adapter.
Make sure the wall charger is inserted all the way into the electrical outlet.
When not in use, unplug the wall charger.
Place the unit on a sturdy and flat surface while charging.
Keep the unit out of reach of children.

BATTERY DISPOSAL:

This product contains a lithium polymer battery. Lithium polymer batteries are environmentally safe when fully discharged. Please refer to your local and state laws for battery disposal procedures.

www.smtekgroup.com
1 Year Limited Warranty
Please Email cs@smtekgroup.com