Bluestone TWS4 Echo True Wireless Earbuds with Charging Case and Wireless Charging Pad User Manual

With Charging Case & Wireless Charging Pad
TW54

User Manual

Product Overview

Bluetooth Pairing

Pair a Single Earbud:

1. Hold down the Multi-Function Button for 3 Seconds
2. The Pairing Indicator Light will flicker red and blue until the earbud appears on your device’s Bluetooth Interface
3. Select “Bluestone TWS1 “from your device’s Bluetooth Interface

Pair Both Earbuds:

1. Simultaneously hold down the Multi-Function Button on Both earbuds for 3 Seconds
2. The Pairing Indicator Light will flicker red and blue and a sound will prompt that they are being paired.
3. The blue light will flash slowly to indicate that they have been successfully paired
4. Select “Bluestone TWS1” from your device’s Bluetooth Interface.
   • After a successful connection you can listen to music and make a phone call.
   • Shutdown, play, and pause can be controlled by either multi-function button.
   • After pairing for the first time just press the multi-function button to automatically reconnect.

Make a Call:

1. Connect the earbuds to your Phone’s Bluetooth
2. Use your Phone’s interface to make a call
3. To receive an incoming call press the Multi-Function Button once
4. To deny an incoming call quickly press the Multi-Function Button twice

Listen to Music:

1. Connect the earbuds to your Phone’s Bluetooth
2. Use your Phone’s interface to select your music
3. Once paired music will automatically play through the earbuds
4. Press the Multi-Function Button to Pause/Play Music

Turn Off the Earbuds:

1. Press the Multi-function Button for up to 5 seconds or until the red light flashes
2. The earbuds will automatically turn off if they are out of reach of the Bluetooth Device or if the Bluetooth Device shuts down

Charging:

Charging Case:

1. Connect the Micro USB end of the provided Charging Cable into the Micro USB Port of the Charging Case
2. Connect the USB end of the USB Charging Cable into any USB Charging Port.
3. Both Charging Case Indicator Lights will glow when it is fully charged. (Approximately 2 hours)

Wireless Charging:

1. Connect the Micro USB end of the provided Charging Cable into the Micro USB Port of the Wireless Charging Pad

2. Connect the USB end of the USB Charging Cable into any USB Charging Port
   Wireless Charging Continued:

3. The Wireless Charging Pad Indicator Light will turn on when it is ready to charge the Charging Case

4. Place the Charging Case (with or without the earbuds inside) on the center of the Wireless Charging Pad

5. The Charging Case Indicator Lights will glow when it is fully charged. ( Approximately 2 hours)

6. Once fully charged the Wireless Charging Pad will automatically stop charging in order to prevent damage to the charging case

Earbuds:

1. Charge the Earbuds by placing them into the already charged Charging Case
2. The Charging Case Indicator Lights will turn off once the earbuds are fully charged. (Approximately 1 hour)

©SM TEK GROUP INC, All rights reserved.
BlueStone is a trademark of SM TEK GROUP INC.
New York, NY 10001
Made in China
www.smtekgroup.com
1 Year Limited Warranty
Please Email cs@smtekgroup.com

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>